Saved in:
| Hovedforfatter: | |
|---|---|
| Format: | Recurso digital |
| Sprog: | |
| Udgivet: |
Zenodo
2011
|
| Online adgang: | https://doi.org/10.5281/zenodo.15452964 |
| Tags: |
Tilføj Tag
Ingen Tags, Vær først til at tagge denne postø!
|
Lignende værker
DYNAMIC INTERLAMINAR FRACTURE TOUGHNESS IN POLYMERIC COMPOSITES
af: C. T. Sun, et al.
Udgivet: (1999)
af: C. T. Sun, et al.
Udgivet: (1999)
NEW TEST METHOD AND MONITORING TECHNIQUE TO EVALUATE MODE III AND MIXED MODE FRACTURE TOUGHNESS IN COMPOSITE LAMINATES
af: Gershon Yaniv, et al.
Udgivet: (1991)
af: Gershon Yaniv, et al.
Udgivet: (1991)
CRACK TIP STRESS FIELDS AND FRACTURE TOUGHNESS IN ADHESIVE JOINTS
af: Cheng Yan, et al.
Udgivet: (1999)
af: Cheng Yan, et al.
Udgivet: (1999)
FREEZING AND THAWING EFFECTS ON THE FRACTURE TOUGHNESS OF CONCRETE-CFRP INTERFACES
af: David M. Boyajian, et al.
Udgivet: (2003)
af: David M. Boyajian, et al.
Udgivet: (2003)
GRAPHENE WOVEN FABRICS-EPOXY COMPOSITES WITH EXCEPTIONAL FRACTURE TOUGHNESS AND MECHANICAL PROPERTIES
af: Xu Liu, et al.
Udgivet: (2015)
af: Xu Liu, et al.
Udgivet: (2015)
MIXED MODE FRACTURE TOUGHNESS CHARACTERIZATION OF SANDWICH INTERFACES USING THE MODIFIED TSD SPECIMEN
af: L Carlsson, et al.
Udgivet: (2009)
af: L Carlsson, et al.
Udgivet: (2009)
EFFECT OF PEK CONTENT ON FRACTURE TOUGHNESS OF GLASS WOVEN FABRIC / PHENOLIC RESIN COMPOSITES
af: Y.Q. Sun, et al.
Udgivet: (1999)
af: Y.Q. Sun, et al.
Udgivet: (1999)
TENSILE FRACTURE CHARACTERISTICS OF HYBRID FIBER COMPOSITE USING SINGLE FIBER FRAGMENTATION TEST
af: J. Jia, et al.
Udgivet: (2011)
af: J. Jia, et al.
Udgivet: (2011)
ENHANCING THE INTERLAMINAR FRACTURE RESISTANCE OF LAMINATED COMPOSITES BY USING CONTINUOUS CARBON NANOTUBE FILMS
af: Hong Xu, et al.
Udgivet: (2015)
af: Hong Xu, et al.
Udgivet: (2015)
FABRICATION OF 2-D PAN FIBER-PITCH MATRIX CARBON-CARBON COMPOSITES USING PREPREG TECHNIQUE
af: Shigeru Takano, et al.
Udgivet: (1991)
af: Shigeru Takano, et al.
Udgivet: (1991)
3D PRINTING AND IN-SITU THERMAL CURING OF CONTINUOUS FIBER-REINFORCED THERMOSET COMPOSITES
af: Carter Dojan, et al.
Udgivet: (2023)
af: Carter Dojan, et al.
Udgivet: (2023)
EFFECTS OF TEMPERATURE ON IMPACT FRACTURE BEHAVIOR OF PULTRUDED GLASS FIBER-REINFORCED POLY(VINYL ESTER) COMPOSITE
af: F.Y. Tsang, et al.
Udgivet: (1999)
af: F.Y. Tsang, et al.
Udgivet: (1999)
A METHOD FOR THE DESIGN OF A CONTINUOUS MICROALGAE CULTURE PHOTOBIOREACTOR IN SERIES WITH RECIRCULATION SYSTEM
af: Sandra Vargas
Udgivet: (2017)
af: Sandra Vargas
Udgivet: (2017)
COST-EFFECTIVE MANAGEMENT OF PREGNANCY-RELATED BACK PAIN IN LOW-RESOURCE SETTINGS
af: Dr. Tembo, Chanda Mwansa
Udgivet: (2025)
af: Dr. Tembo, Chanda Mwansa
Udgivet: (2025)
3D PRINTING OF CONTINUOUS CARBON FIBER REINFORCED THERMOPLASTIC: RELATIONSHIP BETWEEN CROSS-POINTS DISTANCE AND TENSILE PERFORMANCE
af: Gongshuo Wang, et al.
Udgivet: (2023)
af: Gongshuo Wang, et al.
Udgivet: (2023)
THE SOCRATIC METHOD WITH THE INTEGRATION OF ARTIFICIAL INTELLIGENCE AS AN EFFECTIVE MODERN FORM OF TRAINING FOR FUTURE LAWYERS
af: Koliada, D. M., et al.
Udgivet: (2025)
af: Koliada, D. M., et al.
Udgivet: (2025)
DUST MANAGEMENT STRATEGIES FOR HAUL ROADS IN OPEN-CAST COAL MINING OPERATIONS WITH COST-EFFECTIVE SENSORS
af: Bhat, Mohmmad Farooq, et al.
Udgivet: (2024)
af: Bhat, Mohmmad Farooq, et al.
Udgivet: (2024)
VALUING A WATER RECREATION FACILITY USING SEMI PARAMETRIC ESTIMATORS IN THE TRAVEL COST METHOD
af: Mónica M. Jaime
Udgivet: (2011)
af: Mónica M. Jaime
Udgivet: (2011)
A PROMISING PREPARATION METHOD FOR AL7075-B4CAL LAYERED COMPOSITE BY CONTINUOUS CASTING AND HOT ROLLING
af: Yubo Zhang, et al.
Udgivet: (2017)
af: Yubo Zhang, et al.
Udgivet: (2017)
OXIDE-OXIDE CMCS PREPARED BY ELECTROPHORETIC INFILTRATION (EPI) OF NEXTEL� PREFORMS
af: C. Georgi, et al.
Udgivet: (2003)
af: C. Georgi, et al.
Udgivet: (2003)
NOVEL PHENYLETHYNYL-TERMINATED POLYIMIDE WITH EXCELLENT PROCESSABILITY AND HIGH THERMAL STABILITY
af: Xiuting Li, et al.
Udgivet: (2017)
af: Xiuting Li, et al.
Udgivet: (2017)
EFFECTS OF FIBER SURFACE TREATMENT ON THE FIBER BREAK BEHAVIOR IN SINGLE FIBER COMPOSITE
af: Shinji Ogihara, et al.
Udgivet: (1999)
af: Shinji Ogihara, et al.
Udgivet: (1999)
EFFECTIVE MODULUS METHOD (EMM) CONCEPT APPLIED TO THIN‐WALLED STEEL BEAMS AFFECTED BY LOCAL‐DISTORTIONAL INTERACTION
af: Luís Prola, et al.
Udgivet: (2024)
af: Luís Prola, et al.
Udgivet: (2024)
DEVELOPMENT OF AN ALTERNATIVE LOW-COST LANDSLIDE MONITORING METHOD USING DATA FROM TUSAGA-AKTIF GNSS NETWORK
af: TEMEL BAYRAK
Udgivet: (2015)
af: TEMEL BAYRAK
Udgivet: (2015)
CONTINUOUS EDUCATION FOR MINISTERS.
af: ADAMS, HENRY BABCOCK
Udgivet: (1966)
af: ADAMS, HENRY BABCOCK
Udgivet: (1966)
A REVIEW ON DESIGN AND FABRICATION OF AUTOMATIC SMART DUSTBIN
af: Jagadeesh L R, et al.
Udgivet: (2025)
af: Jagadeesh L R, et al.
Udgivet: (2025)
DESIGN AND FABRICATION OF A MICROSYSTEM TO HANDLE BIOLOGICAL OBJECTS
af: FLAVIO HUMBERTO FERNÁNDEZ MORALES
Udgivet: (2008)
af: FLAVIO HUMBERTO FERNÁNDEZ MORALES
Udgivet: (2008)
CMCS : classifying and analyzing clustered somatic mutations to elucidate the potential contributions in tumorigenesis
af: Jiaming Jin, et al.
Udgivet: (2025)
af: Jiaming Jin, et al.
Udgivet: (2025)
MADM TECHNIQUE INTEGRATED WITH GREY- BASED TAGUCHI METHOD FOR SELECTION OF ALLUMINIUM ALLOYS TO MINIMIZE DEBURRING COST DURING DRILLING
af: Reddy Sreenivasulu
Udgivet: (2015)
af: Reddy Sreenivasulu
Udgivet: (2015)
WHAT IS AN EXCELLENT PLACE TO WORK? DIFFERENCES IN THE PERCEPTION OF MEN AND WOMEN IN THE CONSTRUCTION SECTOR
af: Nágila Giovanna Silva Vilela
Udgivet: (2021)
af: Nágila Giovanna Silva Vilela
Udgivet: (2021)
ACCOUNTING FOR FRICTION IN CRACKS UNDER COMPRESSION AND SHEAR IN AN ANISOTROPIC DAMAGE MODEL AND APPLICATION TO CMCS
af: Emmanuel Baranger
Udgivet: (2019)
af: Emmanuel Baranger
Udgivet: (2019)
TELEPORTATION AS CONTINUOUS STATE TRANSFORMATION
af: willoughby, samuel james
Udgivet: (2026)
af: willoughby, samuel james
Udgivet: (2026)
CORRECTION FACTORS FOR MODE B INTERLAMINAR TOUGHNESS TESTS (ELS ANDENF)
af: Y. Wang, et al.
Udgivet: (1991)
af: Y. Wang, et al.
Udgivet: (1991)
USING NICKEL NANOCOMPOSITE AS A STRUCTURAL MATERIAL FOR MEMS RESONATOR FABRICATION
af: Kwok-Siong Teh, et al.
Udgivet: (2003)
af: Kwok-Siong Teh, et al.
Udgivet: (2003)
MODÉLISATION CONCEPTUELLE D'UNE UNITÉ DE FABRICATION MICROÉLECTRONIQUE
af: Jairo R. Montoya-Torres
Udgivet: (2007)
af: Jairo R. Montoya-Torres
Udgivet: (2007)
FABRICATION AND CHARACTERIZATION OF HYBRID COMPOSITE ALUMINUM FOAM FOR STRUCTURAL APPLICATIONS
af: Mr. G. SIVA RAM, et al.
Udgivet: (2025)
af: Mr. G. SIVA RAM, et al.
Udgivet: (2025)
KEY FACTORS FOR A CONTINUOUS IMPROVEMENT PROCESS
af: Hector Ricardo Formento
Udgivet: (2013)
af: Hector Ricardo Formento
Udgivet: (2013)
A CROSS SECTIONAL ANALYSIS OF MENTAL TOUGHNESS AND WILL TO WIN AMONG ELITE FOOTBALL PLAYERS
af: Jaspal Singh
Udgivet: (2012)
af: Jaspal Singh
Udgivet: (2012)
BEHAVIORAL BIOMETRIC CONTINUOUS USER AUTHENTICATION
af: Mrs. Bhavana, Jagati Goutham, Jakkula Karnakar, Javidi Bharath Reddy, and Nommula Anuroop
Udgivet: (2026)
af: Mrs. Bhavana, Jagati Goutham, Jakkula Karnakar, Javidi Bharath Reddy, and Nommula Anuroop
Udgivet: (2026)
BIOMECHANICAL PROPERTIES OF RESORBABLE COMPOSITE BONE FRACTURE REPAIR PLATES
af: Ifty Ahmed
Udgivet: (2013)
af: Ifty Ahmed
Udgivet: (2013)