In-situ metallic coating of atom probe specimen for enhanced yield, performance, and increased field-of-view
Fuente:
arXiv
Saved in:
| Main Authors: | , , , , , , , , , |
|---|---|
| Format: | Preprint |
| Published: |
2023
|
| Subjects: | |
| Online Access: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866914642886918144 |
|---|---|
| author | Schwarz, Tim M. Woods, Eric Singh, Mahander P. Jung, Chanwon Aota, Leonardo S. Jang, Kyuseon Krämer, Mathias Kim, Se-Ho McCarroll, Ingrid Gault, Baptiste |
| author_facet | Schwarz, Tim M. Woods, Eric Singh, Mahander P. Jung, Chanwon Aota, Leonardo S. Jang, Kyuseon Krämer, Mathias Kim, Se-Ho McCarroll, Ingrid Gault, Baptiste |
| contents | Atom probe tomography requires needle-shaped specimens with a diameter typically below 100 nm, making them both very fragile and reactive, and defects (notches at grain boundaries or precipitates) are known to affect the yield and data quality. The use of a conformal coating directly on the sharpened specimen has been proposed to increase yield and reduce background. However, to date, these coatings have been applied ex-situ and mostly are not uniformly. Here, we report on the controlled focused ion beam in-situ deposition of a thin metal film on specimens immediately after specimen preparation. Different metallic targets e.g. Cr were attached to a micromanipulator via a conventional lift-out method and sputtered using the Ga or Xe ions. We showcase the many advantages of coating specimens from metallic to non-metallic materials. We have identified an increase in data quality and yield, an improvement of the mass resolution, as well as an increase in the effective field-of-view enabling visualization of the entire original specimen, including the complete surface oxide layer. The ease of implementation of the approach makes it very attractive for generalizing its use across a very wide range of atom probe analyses. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2309_07836 |
| institution | arXiv |
| publishDate | 2023 |
| record_format | arxiv |
| spellingShingle | In-situ metallic coating of atom probe specimen for enhanced yield, performance, and increased field-of-view Schwarz, Tim M. Woods, Eric Singh, Mahander P. Jung, Chanwon Aota, Leonardo S. Jang, Kyuseon Krämer, Mathias Kim, Se-Ho McCarroll, Ingrid Gault, Baptiste Applied Physics Materials Science Atom probe tomography requires needle-shaped specimens with a diameter typically below 100 nm, making them both very fragile and reactive, and defects (notches at grain boundaries or precipitates) are known to affect the yield and data quality. The use of a conformal coating directly on the sharpened specimen has been proposed to increase yield and reduce background. However, to date, these coatings have been applied ex-situ and mostly are not uniformly. Here, we report on the controlled focused ion beam in-situ deposition of a thin metal film on specimens immediately after specimen preparation. Different metallic targets e.g. Cr were attached to a micromanipulator via a conventional lift-out method and sputtered using the Ga or Xe ions. We showcase the many advantages of coating specimens from metallic to non-metallic materials. We have identified an increase in data quality and yield, an improvement of the mass resolution, as well as an increase in the effective field-of-view enabling visualization of the entire original specimen, including the complete surface oxide layer. The ease of implementation of the approach makes it very attractive for generalizing its use across a very wide range of atom probe analyses. |
| title | In-situ metallic coating of atom probe specimen for enhanced yield, performance, and increased field-of-view |
| topic | Applied Physics Materials Science |
| url | https://arxiv.org/abs/2309.07836 |