Buchumschlag

Limits of dispersoid size and number density in oxide dispersion strengthened alloys fabricated with powder bed fusion-laser beam

Fuente: arXiv

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Wassermann, Nathan A., Li, Yongchang, Myers, Alexander J., Kantzos, Christopher A., Smith, Timothy M., Beuth, Jack L., Malen, Jonathan A., Shao, Lin, McGaughey, Alan J. H., Narra, Sneha P.
Format:	Preprint
Veröffentlicht:	2023
Schlagworte:	Materials Science
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Corrosion in laser powder bed fusion AlSi10Mg alloy
von: Hossein Laieghi, et al.
Veröffentlicht: (2024)

Review of additively manufactured zinc alloys by laser powder bed fusion for biomedical applications
von: Xuan Yang, et al.
Veröffentlicht: (2025)

Airborne acoustic emission enables sub-scanline keyhole porosity quantification and effective process characterization for metallic laser powder bed fusion
von: Liu, Haolin, et al.
Veröffentlicht: (2025)

Direct consolidation of an oxide dispersion strengthened alloy by hot rotary swaging
von: L. Kunčická, et al.
Veröffentlicht: (2024)

On the influence of powder particle size on single-track formation in laser powder bed fusion of AlSi10Mg alloy
von: Solyaev, Y., et al.
Veröffentlicht: (2025)

Integration of sensors during laser powder bed fusion
von: Andy Schönherr, et al.
Veröffentlicht: (2024)

Beam shaping to tackle laser powder bed fusion challenges
von: Gwenn Paillier, et al.
Veröffentlicht: (2024)

Evaluating the sintering behaviors of ceramic oxide powders processed via binder jet additive manufacturing
von: Edgar Mendoza Jimenez, et al.
Veröffentlicht: (2024)

Multimodal learning of melt pool dynamics in laser powder bed fusion
von: Mojumder, Satyajit, et al.
Veröffentlicht: (2025)

Additive manufacturing of ceramics via the laser powder bed fusion process
von: Abid Ullah, et al.
Veröffentlicht: (2025)

Dissolution zone model of the oxide structure in additively manufactured dispersion-strengthened alloys
von: Hou, Wenyuan, et al.
Veröffentlicht: (2024)

Anti-scatter grid prototype manufactured via laser powder bed fusion of pure tungsten
von: Diachkov, I., et al.
Veröffentlicht: (2025)

Neuromorphic computing for anomaly detection in a laser powder bed fusion process
von: Banerjee, Shreyan, et al.
Veröffentlicht: (2025)

Correlating the microstructures and mechanical behaviors in a TiB 2 ‐modified Fe 40 Cr 20 Co 20 Ni 20 high‐entropy alloy fabricated by laser powder bed fusion
von: Hong‐Liang Hu, et al.
Veröffentlicht: (2025)

Deep Learning for Melt Pool Depth Contour Prediction From Surface Thermal Images via Vision Transformers
von: Ogoke, Francis, et al.
Veröffentlicht: (2024)

An analysis of technical and economic aspects of digital spare parts on variating materials in powder bed fusion of metals using a laser beam (PBF‐LB/M)
von: C. Rockinger, et al.
Veröffentlicht: (2025)

Correction: Correlating the microstructures and mechanical behaviors in a TiB 2 ‐modified Fe 40 Cr 20 Co 20 Ni 20 high‐entropy alloy fabricated by laser powder bed fusion
von: Hong‐Liang Hu, et al.
Veröffentlicht: (2025)

Structural and properties of anisotropy in Ti6Al4V triply periodic minimal surface structures fabricated via laser powder bed fusion
von: Yi‐Hui Zhang, et al.
Veröffentlicht: (2025)

Data‐informed uncertainty quantification for laser‐based powder bed fusion additive manufacturing
von: Mihaela Chiappetta, et al.
Veröffentlicht: (2024)

Data-informed uncertainty quantification for laser-based powder bed fusion additive manufacturing
von: Chiappetta, Mihaela, et al.
Veröffentlicht: (2023)

A Study of Faculty Data Curation Behaviors and Attitudes at a Teaching-Centered University
von: Scaramozzino, Jeanine Marie, et al.
Veröffentlicht: (2012)

Characterization of compressive fatigue behavior and acoustic emission analysis of Ti6Al4V cellular lattice materials fabricated by laser powder bed fusion
von: Sunil Raghavendra, et al.
Veröffentlicht: (2024)

On the relation between microstructure and impact toughness of 17-4__PH stainless steel produced by powder bed fusion laser beam (PBF-LB)
von: Melo, Renata de Oliveira, et al.
Veröffentlicht: (2025)

Stealth by Conformity: Evading Robust Aggregation through Adaptive Poisoning
von: McGaughey, Ryan, et al.
Veröffentlicht: (2025)

Reducing part deformation of isotactic polypropylene specimens fabricated with powder bed fusion technique through controlling crystallization behaviors
von: Xia Gao, et al.
Veröffentlicht: (2024)

Surrogate Modeling of Melt Pool Thermal Field using Deep Learning
von: Hemmasian, AmirPouya, et al.
Veröffentlicht: (2022)

Fatigue and corrosion‐fatigue behavior of the β‐metastable Ti‐5Al‐5Mo‐5V‐3Cr alloy processed by laser powder bed fusion
von: Erika Gabriele Alves Alcântara, et al.
Veröffentlicht: (2024)

Optimized powder bed laser melting processes
von: Karl Laderer, et al.
Veröffentlicht: (2024)

Optimized powder bed laser melting processes
Veröffentlicht: (2024)

A rapid experimental workflow for studying melt track scaling in laser powder bed fusion using high-precision metal template substrates
von: Weissbach, Reimar, et al.
Veröffentlicht: (2024)

Statistical analysis to assess porosity equivalence with uncertainty across additively manufactured parts for fatigue applications
von: Miner, Justin P., et al.
Veröffentlicht: (2024)

MeltpoolINR: Predicting temperature field, melt pool geometry, and their rate of change in laser powder bed fusion
von: Manav, Manav, et al.
Veröffentlicht: (2024)

Thermal history and crystallinity of vertical Zr-based bulk metallic glass struts manufactured by laser powder bed fusion
von: Bruckhaus, Lars, et al.
Veröffentlicht: (2026)

Effect of Ag nano-additivation on microstructure formation in Nd-Fe-B magnets built by laser powder bed fusion
von: Nallathambi, Varatharaja, et al.
Veröffentlicht: (2025)

Achieving high strength and ductility in laser powder bed fusion‐manufactured pure titanium through the addition of carbon nanotubes
von: Li Ma, et al.
Veröffentlicht: (2025)

Influence of laser surface polishing on surface topology and residual stress in laser powder bed fusion additively manufactured aluminium‐12 silicon part
von: S. K. Balla, et al.
Veröffentlicht: (2025)

Effect of chemical etching time on the fatigue behavior of Ti‐6Al‐4V produced by laser powder bed fusion
von: David Melle, et al.
Veröffentlicht: (2024)

Accelerating Process Development for 3D Printing of New Metal Alloys
von: Guirguis, David, et al.
Veröffentlicht: (2023)

Triggering ultrastrong age‐hardening response of laser‐powder bed‐fused WE43 alloy via solid solution temperature design
von: Chen Ji, et al.
Veröffentlicht: (2025)

Formation of SnO‐based glassy anode for all‐solid‐state battery prepared by laser‐based powder bed fusion technique
von: Fumitaka Sato, et al.
Veröffentlicht: (2025)