System Characterization of Dispersive Readout in Superconducting Qubits
Fuente:
arXiv
Guardado en:
| Autores principales: | , , , , , , |
|---|---|
| Formato: | Preprint |
| Publicado: |
2024
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1866929230816739328 |
|---|---|
| author | Sank, Daniel Opremcak, Alex Bengtsson, Andreas Khezri, Mostafa Chen, Zijun Naaman, Ofer Korotkov, Alexander |
| author_facet | Sank, Daniel Opremcak, Alex Bengtsson, Andreas Khezri, Mostafa Chen, Zijun Naaman, Ofer Korotkov, Alexander |
| contents | Designing quantum systems with the measurement speed and accuracy needed for quantum error correction using superconducting qubits requires iterative design and test informed by accurate models and characterization tools. We introduce a single protocol, with few prerequisite calibrations, which measures the dispersive shift, resonator linewidth, and drive power used in the dispersive readout of superconducting qubits. We find that the resonator linewidth is poorly controlled with a factor of 2 between the maximum and minimum measured values, and is likely to require focused attention in future quantum error correction experiments. We also introduce a protocol for measuring the readout system efficiency using the same power levels as are used in typical qubit readout, and without the need to measure the qubit coherence. We routinely run these protocols on chips with tens of qubits, driven by automation software with little human interaction. Using the extracted system parameters, we find that a model based on those parameters predicts the readout signal to noise ratio to within 10% over a device with 54 qubits. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2402_00413 |
| institution | arXiv |
| publishDate | 2024 |
| record_format | arxiv |
| spellingShingle | System Characterization of Dispersive Readout in Superconducting Qubits Sank, Daniel Opremcak, Alex Bengtsson, Andreas Khezri, Mostafa Chen, Zijun Naaman, Ofer Korotkov, Alexander Quantum Physics Designing quantum systems with the measurement speed and accuracy needed for quantum error correction using superconducting qubits requires iterative design and test informed by accurate models and characterization tools. We introduce a single protocol, with few prerequisite calibrations, which measures the dispersive shift, resonator linewidth, and drive power used in the dispersive readout of superconducting qubits. We find that the resonator linewidth is poorly controlled with a factor of 2 between the maximum and minimum measured values, and is likely to require focused attention in future quantum error correction experiments. We also introduce a protocol for measuring the readout system efficiency using the same power levels as are used in typical qubit readout, and without the need to measure the qubit coherence. We routinely run these protocols on chips with tens of qubits, driven by automation software with little human interaction. Using the extracted system parameters, we find that a model based on those parameters predicts the readout signal to noise ratio to within 10% over a device with 54 qubits. |
| title | System Characterization of Dispersive Readout in Superconducting Qubits |
| topic | Quantum Physics |
| url | https://arxiv.org/abs/2402.00413 |