Buchumschlag

Effect of atmosphere and sintering time on the microstructure and mechanical properties at high temperatures of $α$-SiC sintered with liquid phase Y$_2$O$_3$ and Al$_2$O$_3$

Fuente: arXiv

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Rodriguez, Miguel Castillo, Bernabe, Antonio Munoz, Rodriguez, Arturo Dominguez
Format:	Preprint
Veröffentlicht:	2024
Schlagworte:	Applied Physics
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Microstructure and high temperature mechanical properties of liquid-phase-sintered $α$-SiC with Y$_2$O$_3$-Al$_2$O$_3$ additions
von: Rodríguez, Miguel Castillo, et al.
Veröffentlicht: (2024)

Effect of Y 2 O 3 addition on microstructure and mechanical properties of spark plasma sintered TiB 2 –20SiC–5Ni cermet
von: Xuemei Ouyang, et al.
Veröffentlicht: (2025)

Modification of liquid phase and microstructure of sintered mullite by different additives
von: Yaxuan Wang, et al.
Veröffentlicht: (2024)

Effect of mechanical activation of electroexplosive Al 2 O 3 nanopowder on the characteristics of sintered ceramics
von: M. I. Lerner, et al.
Veröffentlicht: (2026)

High‐temperature deformation and consolidation of polycrystalline α‐SiC by spark plasma sintering
von: Dmytro Demirskyi, et al.
Veröffentlicht: (2024)

Effect of TiB 2 on properties and microstructure of Si 3 N 4 ‐TiB 2 ceramics sintered at lower temperature
von: Kai Meng, et al.
Veröffentlicht: (2025)

Effects of Li + and/or F − modification methods on the sintering behaviors, microstructures of Mg 2 SiO 4 ceramics
von: J. J. Bian, et al.
Veröffentlicht: (2025)

Effect of the electrosteric stabilization mechanism, sintering additives, and sintering process on the properties of 3D‐printed alumina ceramics
von: He Li, et al.
Veröffentlicht: (2025)

Spark plasma sintering of Ti‐25at%Si targets: densification mechanisms, phase evolution, and reaction sintering kinetics
von: Qizhong Li, et al.
Veröffentlicht: (2026)

Effect of different sintering process on mechanical properties and microstructure of TiB 2 ‐TiN‐based cermet material
von: Zhengyi Han, et al.
Veröffentlicht: (2024)

Effect of C on the phase state and microstructure of high‐entropy diborides produced via reactive spark plasma sintering
von: Katherine A. Acord, et al.
Veröffentlicht: (2025)

Microstructure and mechanical properties of pressure‐less sintered B 4 C–SiC–ZrB 2 –LaB 6 ceramic composites
von: Yaning Zhang, et al.
Veröffentlicht: (2024)

Influence of the MgO content on zirconia‐toughened alumina ceramic slurry properties and sintered body microstructure
von: Liu Shuangyu, et al.
Veröffentlicht: (2025)

Mechanical and electrical properties of 3Y‐TZP/TiSi 2 composites sintered at different temperatures
von: Weikang Liu, et al.
Veröffentlicht: (2024)

Joining of C f /SiC composites using AlCoCrFeNi 2.1 eutectic high‐entropy alloy filler by spark plasma sintering
von: Rongpei Wang, et al.
Veröffentlicht: (2024)

Effect of K 2 O/Na 2 O addition on the microstructure and mechanical properties of CaO‐MgO‐Al 2 O 3 ‐SiO 2 glass ceramic
von: Hong‐Yang Wang, et al.
Veröffentlicht: (2025)

Fabrication, microstructure, and properties of Dy‐doped (Y 1− x Dy x ) 3 Si 2 C 2 ceramics fabricated by in situ reactive spark plasma sintering
von: Lianghao Chen, et al.
Veröffentlicht: (2024)

Study on the mechanical and low‐temperature degradation properties of 3Y‐TZP doped with nano‐MgO by microwave sintering
von: Tian Yuan, et al.
Veröffentlicht: (2024)

Improved precision and mechanical properties of 3D‐printed silica ceramics via sintering temperature optimization
von: Yunsong Mu, et al.
Veröffentlicht: (2024)

Zirconia spacer electrodes improve microstructural uniformity of flash sintered zirconia ceramics
von: Vladimír Prajzler, et al.
Veröffentlicht: (2025)

Microwave dielectric properties of Na 2 O–Ln 2 O 3 –MoO 3 –TiO 2 (Ln = Nd, La and Ce) system with low‐sintering temperature
von: Wen‐Bo Li, et al.
Veröffentlicht: (2024)

Slurry‐impregnating hot‐press sintered silicon carbide nanofiber/silicon carbide composites with Al‐B‐C as sintering additives
von: Jiyu Tao, et al.
Veröffentlicht: (2024)

Low‐temperature sintering performance study of CCTO–Mn–Co series black Al 2 O 3 ceramics by the one‐step method
von: He Zhao, et al.
Veröffentlicht: (2024)

Fabrication of Si 3 N 4 ceramics substrates with high thermal conductivity by tape casting and gas pressure sintering
von: Jixue Zhao, et al.
Veröffentlicht: (2024)

High‐transparency AlON ceramics fabricated by pressureless sintering method
von: Yanan Zhao, et al.
Veröffentlicht: (2025)

Influences of sintering aids on discontinuous grain growth and properties in BaTiO 3 ‐based ferroelectric ceramics
von: Wei Xu, et al.
Veröffentlicht: (2025)

Effect of PyC/BN interfacial phases on mechanical behavior of SiC/SiC composites
von: Haipeng Qiu, et al.
Veröffentlicht: (2024)

Enhanced thermal conductivity and flexural strength of Si 3 N 4 ceramics by using YF 3 ‐MgSiN 2 as sintering additives
von: Na Zhang, et al.
Veröffentlicht: (2025)

Comparative Study on the Effect of In Situ MgAl 2 O 4 and ZnAl 2 O 4 on the Properties of Al 2 O 3 –SiC–C Based Trough Castables
von: Dipanjan Ash, et al.
Veröffentlicht: (2026)

Effects of packing powder on densification and properties of pressureless sintered silicon nitride ceramics
von: You Zhou, et al.
Veröffentlicht: (2025)

Spray‐pass effects on microstructure and mechanical properties of APS ZrO 2 ‒Al 2 O 3 coating on SUS304 steel
von: Muhammad Rifai, et al.
Veröffentlicht: (2025)

Microstructure and electrical properties of aluminum oxide‐reinforced 3 mol% yttria‐stabilized tetragonal zirconia polycrystals/TiSi 2 composites by vacuum sintering
von: Weikang Liu, et al.
Veröffentlicht: (2024)

Influence of in situ dysprosium aluminate garnet formation on sintering of reaction sintered magnesium aluminate spinel
von: Biswajit Baruah, et al.
Veröffentlicht: (2024)

Spark plasma sintering and mechanical properties of two grades of PEKK presenting different Tere/Iso ratios
von: Anthony Heyer, et al.
Veröffentlicht: (2024)

Effects of amorphous phase and yttrium on flash sintering and microstructures of ZrO 2 –SiO 2 ceramic nanocomposites
von: Le Fu, et al.
Veröffentlicht: (2024)

Effect of additive content on the microstructure and room‐temperature and high‐temperature mechanical properties of Si 3 N 4 ceramics
von: Songmo Du, et al.
Veröffentlicht: (2024)

Flash‐sintering behavior of the composites of 3YSZ and graphene oxide
von: Abhijeet Singh, et al.
Veröffentlicht: (2024)

RESURF Ga$_{2}$O$_{3}$-on-SiC Field Effect Transistors for Enhanced Breakdown Voltage
von: Chen, Junting, et al.
Veröffentlicht: (2024)

Enhanced mechanical properties of SiO 2f /SiO 2 composites via sol–gel fabrication of Al 2 O 3 coatings on quartz fiber
von: Jiexin Jiao, et al.
Veröffentlicht: (2025)

Effect of carbon content on electrical, thermal, and mechanical properties of pressureless sintered SiC ceramics
von: Yeongjun Oh, et al.
Veröffentlicht: (2025)