Saved in:
| Main Authors: | , , , , , , , , |
|---|---|
| Format: | Preprint |
| Published: |
2024
|
| Subjects: | |
| Online Access: | https://arxiv.org/abs/2402.02613 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866913223087751168 |
|---|---|
| author | Espinosa, F. García, J. J. Hernández, A. Mazo, M. Ureña, J. Jiménez, J. A. Fernández, I. Pérez, C. García, J. C. |
| author_facet | Espinosa, F. García, J. J. Hernández, A. Mazo, M. Ureña, J. Jiménez, J. A. Fernández, I. Pérez, C. García, J. C. |
| contents | This work describes a classifier designed to identify rail breakages in double-track railway lines, completing the electronic equipment carried out by authors. The main objective of this proposal is to guarantee the integrity of tracks before the railway traffic starts working. In addition, it facilitates maintenance tasks providing information about possible breakages. The detection of breakages is based on the analysis of eight currents provided by the electronic equipment, one per rail, at the ends of the section (emitting and receiving nodes). The imbalance that occurs among the value of these currents implies that there is at least a breakage in the track section under analysis. This analysis is conducted according to three phases. The first one identifies whether there is a breakage, and, in that case, the damaged track is identified. The second phase provides information about which rail is broken (internal, external or both of them) in the previously identified track. Finally, if there is only one breakage, the third phase estimates its most likely zone along the track section. This situation is considered as a classification problem, and solved by means of the Principal Component Analysis technique. This means that a significant number of measurements is required for every breakage pattern (types of breakages) to be considered. Due to the difficulty of having real data, the proposal has been validated using an 8km-long double-track hardware simulator specially designed by the authors, with specific localizations for breakages. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2402_02613 |
| institution | arXiv |
| publishDate | 2024 |
| record_format | arxiv |
| spellingShingle | Advanced monitoring of rail breakage in double-track railway lines by means of PCA techniques Espinosa, F. García, J. J. Hernández, A. Mazo, M. Ureña, J. Jiménez, J. A. Fernández, I. Pérez, C. García, J. C. Signal Processing This work describes a classifier designed to identify rail breakages in double-track railway lines, completing the electronic equipment carried out by authors. The main objective of this proposal is to guarantee the integrity of tracks before the railway traffic starts working. In addition, it facilitates maintenance tasks providing information about possible breakages. The detection of breakages is based on the analysis of eight currents provided by the electronic equipment, one per rail, at the ends of the section (emitting and receiving nodes). The imbalance that occurs among the value of these currents implies that there is at least a breakage in the track section under analysis. This analysis is conducted according to three phases. The first one identifies whether there is a breakage, and, in that case, the damaged track is identified. The second phase provides information about which rail is broken (internal, external or both of them) in the previously identified track. Finally, if there is only one breakage, the third phase estimates its most likely zone along the track section. This situation is considered as a classification problem, and solved by means of the Principal Component Analysis technique. This means that a significant number of measurements is required for every breakage pattern (types of breakages) to be considered. Due to the difficulty of having real data, the proposal has been validated using an 8km-long double-track hardware simulator specially designed by the authors, with specific localizations for breakages. |
| title | Advanced monitoring of rail breakage in double-track railway lines by means of PCA techniques |
| topic | Signal Processing |
| url | https://arxiv.org/abs/2402.02613 |