Separation of biocrude produced from hydrothermal liquefaction of faecal sludge without any solvent

Fuente: arXiv
Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Adnan, H M Fairooz, Khalekuzzaman, Md, Fayshal, Md. Atik, Hasan, Md. Mehedi
Format: Preprint
Veröffentlicht: 2024
Schlagworte:
Online-Zugang:
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
_version_ 1866911784773877760
author Adnan, H M Fairooz
Khalekuzzaman, Md
Fayshal, Md. Atik
Hasan, Md. Mehedi
author_facet Adnan, H M Fairooz
Khalekuzzaman, Md
Fayshal, Md. Atik
Hasan, Md. Mehedi
contents In this study faecal sludge is used as raw biomass due to its abundance, low cost, and easy availability. After HTL operation, product separation is getting challenging. Current developed studies observed the separation of aqueous and biocrude oil products occurs during the HTL process more popularly with the use of an organic solvent which is quite expensive. Focusing on this critical issue, this study aims to separate the biocrude and aqueous phase without using any solvent by gravity separation technique. From FTIR analysis data it showed that centrifuged at 6000 rpm partial separation of biocrude and aqueous phase (AP) was noticed. however, at 9000 rpm, FTIR analysis showed that biocrude samples included aliphatic hydrocarbons, phenols, and esters where no signs of any carbon chain were found at AP which indicated the products are successfully separated. The separated Crude portion had the higher A-Factor (0.68) and lower C-Factor (0.58) value which indicates the oil quality was immature grade of lower kerogen type II (i.e., moderate oil-prone). This low-cost technique can be economically advantageous for commercial-scale biocrude production.
format Preprint
id arxiv_https___arxiv_org_abs_2402_17028
institution arXiv
publishDate 2024
record_format arxiv
spellingShingle Separation of biocrude produced from hydrothermal liquefaction of faecal sludge without any solvent
Adnan, H M Fairooz
Khalekuzzaman, Md
Fayshal, Md. Atik
Hasan, Md. Mehedi
Signal Processing
In this study faecal sludge is used as raw biomass due to its abundance, low cost, and easy availability. After HTL operation, product separation is getting challenging. Current developed studies observed the separation of aqueous and biocrude oil products occurs during the HTL process more popularly with the use of an organic solvent which is quite expensive. Focusing on this critical issue, this study aims to separate the biocrude and aqueous phase without using any solvent by gravity separation technique. From FTIR analysis data it showed that centrifuged at 6000 rpm partial separation of biocrude and aqueous phase (AP) was noticed. however, at 9000 rpm, FTIR analysis showed that biocrude samples included aliphatic hydrocarbons, phenols, and esters where no signs of any carbon chain were found at AP which indicated the products are successfully separated. The separated Crude portion had the higher A-Factor (0.68) and lower C-Factor (0.58) value which indicates the oil quality was immature grade of lower kerogen type II (i.e., moderate oil-prone). This low-cost technique can be economically advantageous for commercial-scale biocrude production.
title Separation of biocrude produced from hydrothermal liquefaction of faecal sludge without any solvent
topic Signal Processing
url https://arxiv.org/abs/2402.17028