Optomechanical cavities based on epitaxial GaP on nominally (001)-oriented Si
Fuente:
arXiv
Guardado en:
| Autores principales: | , , , , , , , , , , |
|---|---|
| Formato: | Preprint |
| Publicado: |
2024
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1866910388726005760 |
|---|---|
| author | Mouriño, Paula Mercadé, Laura Lozano, Miguel Sinusía Resta, Raquel Griol, Amadeu Saddik, Karim Ben Barrigón, Enrique Fernández-Garrido, Sergio García, Basilio Javier Martínez, Alejandro Gómez, Víctor J. |
| author_facet | Mouriño, Paula Mercadé, Laura Lozano, Miguel Sinusía Resta, Raquel Griol, Amadeu Saddik, Karim Ben Barrigón, Enrique Fernández-Garrido, Sergio García, Basilio Javier Martínez, Alejandro Gómez, Víctor J. |
| contents | Gallium phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of optomechanical (OM) cavities on GaP epitaxially grown on nominally (001)-oriented Si is introduced by using a two-step process consisting of a low-temperature etching of GaP followed by selective etching of the underneath silicon. The low-temperature (-30 $^o$C) during the dry-etching of GaP hinders the lateral etching rate, preserving the pattern with a deviation between the design and the pattern in the GaP layer lower than 5 %, avoiding the complex process of transferring and bonding a GaP wafer to a silicon-on-insulator wafer. To demonstrate the quality and feasibility of the proposed fabrication route, suspended OM cavities are fabricated and experimentally characterized. The cavities show optical quality factors between 10$^3$ and 10$^4$, and localized mechanical resonances at frequencies around 3.1 GHz. Both optical and mechanical resonances are close to those previously reported on crystalline GaP structures. These results suggest a simple and low-cost way to build GaP-based photonic devices directly integrated on industry-standard Si(001) photonic wafers. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2403_19230 |
| institution | arXiv |
| publishDate | 2024 |
| record_format | arxiv |
| spellingShingle | Optomechanical cavities based on epitaxial GaP on nominally (001)-oriented Si Mouriño, Paula Mercadé, Laura Lozano, Miguel Sinusía Resta, Raquel Griol, Amadeu Saddik, Karim Ben Barrigón, Enrique Fernández-Garrido, Sergio García, Basilio Javier Martínez, Alejandro Gómez, Víctor J. Optics Applied Physics Gallium phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of optomechanical (OM) cavities on GaP epitaxially grown on nominally (001)-oriented Si is introduced by using a two-step process consisting of a low-temperature etching of GaP followed by selective etching of the underneath silicon. The low-temperature (-30 $^o$C) during the dry-etching of GaP hinders the lateral etching rate, preserving the pattern with a deviation between the design and the pattern in the GaP layer lower than 5 %, avoiding the complex process of transferring and bonding a GaP wafer to a silicon-on-insulator wafer. To demonstrate the quality and feasibility of the proposed fabrication route, suspended OM cavities are fabricated and experimentally characterized. The cavities show optical quality factors between 10$^3$ and 10$^4$, and localized mechanical resonances at frequencies around 3.1 GHz. Both optical and mechanical resonances are close to those previously reported on crystalline GaP structures. These results suggest a simple and low-cost way to build GaP-based photonic devices directly integrated on industry-standard Si(001) photonic wafers. |
| title | Optomechanical cavities based on epitaxial GaP on nominally (001)-oriented Si |
| topic | Optics Applied Physics |
| url | https://arxiv.org/abs/2403.19230 |