Low-Loss Silicon Directional Coupler with Arbitrary Coupling Ratios for Broadband Wavelength Operation Based on Bent Waveguides
Fuente:
arXiv
Enregistré dans:
| Auteurs principaux: | , , , , , , , , , , , , , , , , , , , |
|---|---|
| Format: | Preprint |
| Publié: |
2024
|
| Sujets: | |
| Accès en ligne: | |
| Tags: |
Ajouter un tag
Pas de tags, Soyez le premier à ajouter un tag!
|
| _version_ | 1866910403298066432 |
|---|---|
| author | El-Saeed, Ahmed H. Elshazly, Alaa Kobbi, Hakim Magdziak, Rafal Lepage, Guy Marchese, Chiara Vaskasi, Javad Rahimi Bipul, Swetanshu Bode, Dieter Filipcic, Marko Ersek Velenis, Dimitrios Chakrabarti, Maumita De Heyn, Peter Verheyen, Peter Absil, Philippe Ferraro, Filippo Ban, Yoojin Van Campenhout, Joris Bogaerts, Wim Deng, Qingzhong |
| author_facet | El-Saeed, Ahmed H. Elshazly, Alaa Kobbi, Hakim Magdziak, Rafal Lepage, Guy Marchese, Chiara Vaskasi, Javad Rahimi Bipul, Swetanshu Bode, Dieter Filipcic, Marko Ersek Velenis, Dimitrios Chakrabarti, Maumita De Heyn, Peter Verheyen, Peter Absil, Philippe Ferraro, Filippo Ban, Yoojin Van Campenhout, Joris Bogaerts, Wim Deng, Qingzhong |
| contents | We demonstrate a design for a high-performance $2 \times 2$ splitter meeting the essential requirements of broadband coupling, support for arbitrary coupling ratio, ultra low-loss, high fabrication tolerance, and a compact footprint.
This is achieved based on a rigorous coupled mode theory analysis of the broadband response of the bent directional coupler (DC) and by demonstrating a full coupling model, with measured broadband values of 0.4, 0.5, 0.6, and 0.7.
As a benchmark, we demonstrate a 0.5:0.5 splitter that significantly reduces coupling variation from 0.391 in the traditional DC to just 0.051 over an 80 nm wavelength span.
This represents a remarkable 7.67 times reduction in coupling variation.
Further, newly-invented low-loss bends were used in the proposed design leading to an ultra low-loss design with negligible excess loss ($\mathrm{0.003 \pm 0.013 \ dB}$).
The proposed 0.5:0.5 silicon strip waveguide-based design is tolerant and shows consistently low coupling variation over a full 300 mm wafer showcasing a maximum cross coupling variation of 0.112 over 80 nm wavelength range, at the extreme edge of the wafer.
Futhermore, we augmented the wafer mapping with a waveguide width fabrication tolerance study, confirming the tolerance of the device with a mere 0.061 maximum coupling variation with a waveguide width deviation of $\pm 20$ nm over 80 nm wavelength range.
These specs make the proposed splitter an attractive component for practical applications with mass production. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2404_06117 |
| institution | arXiv |
| publishDate | 2024 |
| record_format | arxiv |
| spellingShingle | Low-Loss Silicon Directional Coupler with Arbitrary Coupling Ratios for Broadband Wavelength Operation Based on Bent Waveguides El-Saeed, Ahmed H. Elshazly, Alaa Kobbi, Hakim Magdziak, Rafal Lepage, Guy Marchese, Chiara Vaskasi, Javad Rahimi Bipul, Swetanshu Bode, Dieter Filipcic, Marko Ersek Velenis, Dimitrios Chakrabarti, Maumita De Heyn, Peter Verheyen, Peter Absil, Philippe Ferraro, Filippo Ban, Yoojin Van Campenhout, Joris Bogaerts, Wim Deng, Qingzhong Optics We demonstrate a design for a high-performance $2 \times 2$ splitter meeting the essential requirements of broadband coupling, support for arbitrary coupling ratio, ultra low-loss, high fabrication tolerance, and a compact footprint. This is achieved based on a rigorous coupled mode theory analysis of the broadband response of the bent directional coupler (DC) and by demonstrating a full coupling model, with measured broadband values of 0.4, 0.5, 0.6, and 0.7. As a benchmark, we demonstrate a 0.5:0.5 splitter that significantly reduces coupling variation from 0.391 in the traditional DC to just 0.051 over an 80 nm wavelength span. This represents a remarkable 7.67 times reduction in coupling variation. Further, newly-invented low-loss bends were used in the proposed design leading to an ultra low-loss design with negligible excess loss ($\mathrm{0.003 \pm 0.013 \ dB}$). The proposed 0.5:0.5 silicon strip waveguide-based design is tolerant and shows consistently low coupling variation over a full 300 mm wafer showcasing a maximum cross coupling variation of 0.112 over 80 nm wavelength range, at the extreme edge of the wafer. Futhermore, we augmented the wafer mapping with a waveguide width fabrication tolerance study, confirming the tolerance of the device with a mere 0.061 maximum coupling variation with a waveguide width deviation of $\pm 20$ nm over 80 nm wavelength range. These specs make the proposed splitter an attractive component for practical applications with mass production. |
| title | Low-Loss Silicon Directional Coupler with Arbitrary Coupling Ratios for Broadband Wavelength Operation Based on Bent Waveguides |
| topic | Optics |
| url | https://arxiv.org/abs/2404.06117 |