Dual-comb mode-locked Yb:CALGO laser based on cavity-shared configuration with separated end mirrors
Fuente:
arXiv
Saved in:
| Main Authors: | , , , , , , , |
|---|---|
| Format: | Preprint |
| Published: |
2024
|
| Subjects: | |
| Online Access: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866917639095320576 |
|---|---|
| author | Tang, Ruixin Luo, Ziyu Li, Pengfei Ying, Pengrun Xie, Haiyang Xu, Siyuan Liu, Hui Bai, Jintao |
| author_facet | Tang, Ruixin Luo, Ziyu Li, Pengfei Ying, Pengrun Xie, Haiyang Xu, Siyuan Liu, Hui Bai, Jintao |
| contents | Dual-comb spectroscopy typically requires the utilization of two independent and phase-locked femtosecond lasers, resulting in a complex and expensive system that hinders its industrial applications. Single-cavity dual-comb lasers are considered as one of the primary solution to simplify the system. However, controlling the crucial parameter of difference in repetition rates remains challenging. In this study, we present a dual-comb mode-locked Yb:CALGO laser based on a cavity-shared configuration with separated end mirrors. We employ two pairs of end mirrors and two thin-film polarizers angled at 45 degrees to the cavity axis, leading to separating the cross-polarized laser modes. We achieve simultaneous operation of two combs at approximately 1040 nm with pulse durations of around 400 fs and an average power exceeding 1 W. The repetition rates are approximately 59 MHz and their difference can be easily tuned from zero up to the MHz range. By effectively canceling out common mode noises, we observe minimal fluctuation in the repetition rate difference with a standard deviation of about 1.9 Hz over ten minutes, while experiencing fluctuations in repetition rates as large as 90 Hz. We demonstrate the capabilities of this system by utilizing the free-running dual-comb setup for asynchronous optical sampling on a saturable absorber and measuring etalon transmission spectrum. This system allows for simple and independent control of the repetition rates and their difference during operation, facilitating the selection of optimal repetition rate difference and implementation of phase-locking loops. This advancement paves the way for the development of simple yet high-performance dual-comb laser sources. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2404_08998 |
| institution | arXiv |
| publishDate | 2024 |
| record_format | arxiv |
| spellingShingle | Dual-comb mode-locked Yb:CALGO laser based on cavity-shared configuration with separated end mirrors Tang, Ruixin Luo, Ziyu Li, Pengfei Ying, Pengrun Xie, Haiyang Xu, Siyuan Liu, Hui Bai, Jintao Optics Dual-comb spectroscopy typically requires the utilization of two independent and phase-locked femtosecond lasers, resulting in a complex and expensive system that hinders its industrial applications. Single-cavity dual-comb lasers are considered as one of the primary solution to simplify the system. However, controlling the crucial parameter of difference in repetition rates remains challenging. In this study, we present a dual-comb mode-locked Yb:CALGO laser based on a cavity-shared configuration with separated end mirrors. We employ two pairs of end mirrors and two thin-film polarizers angled at 45 degrees to the cavity axis, leading to separating the cross-polarized laser modes. We achieve simultaneous operation of two combs at approximately 1040 nm with pulse durations of around 400 fs and an average power exceeding 1 W. The repetition rates are approximately 59 MHz and their difference can be easily tuned from zero up to the MHz range. By effectively canceling out common mode noises, we observe minimal fluctuation in the repetition rate difference with a standard deviation of about 1.9 Hz over ten minutes, while experiencing fluctuations in repetition rates as large as 90 Hz. We demonstrate the capabilities of this system by utilizing the free-running dual-comb setup for asynchronous optical sampling on a saturable absorber and measuring etalon transmission spectrum. This system allows for simple and independent control of the repetition rates and their difference during operation, facilitating the selection of optimal repetition rate difference and implementation of phase-locking loops. This advancement paves the way for the development of simple yet high-performance dual-comb laser sources. |
| title | Dual-comb mode-locked Yb:CALGO laser based on cavity-shared configuration with separated end mirrors |
| topic | Optics |
| url | https://arxiv.org/abs/2404.08998 |