Saved in:
| Main Authors: | , |
|---|---|
| Format: | Preprint |
| Published: |
2024
|
| Subjects: | |
| Online Access: | https://arxiv.org/abs/2404.12306 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866929319453917184 |
|---|---|
| author | Singh, Suyash Vardhan Mahto, Rakeshkumar |
| author_facet | Singh, Suyash Vardhan Mahto, Rakeshkumar |
| contents | The demand for low power processing is increasing due to mobile and portable devices. In a processor unit, an adder is an important building block since it is used in Floating Point Units (FPU) and Arithmetic Logic Units (ALU). Also, pipeline techniques are used extensively to improve the throughput of the processing unit. To implement a pipeline requires adding a register at each sub-stage that result in increasing the latency. Moreover, designing a low power pipeline adder with low latency has drawn a lot of attention. In a pipelined architecture that uses Dual Edge Triggered (DET) based registers can help in reducing the latency since they can capture input data at both clock edges. However, for high input activity, a DET flip-flop consumes more power than a Single-Edge Triggered (SET) flip-flop. Moreover, it is required to replace each Flip-Flop (FF) in the processor with Dual Edge Triggered (DET) Flip-Flop which will be a considerable area and power overhead. Therefore, it is desirable to have a switchable DET to SET depending on input activity or load condition to reduce the dynamic power consumption. In this paper, we are proposing a new shift register which imitates DET FF based shift register without the need of special DET FF. The proposed shift register improved the latency in a 4-bit pipelined adder by two-fold. Additionally, the power delay product was reduced by 44.16 %. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2404_12306 |
| institution | arXiv |
| publishDate | 2024 |
| record_format | arxiv |
| spellingShingle | Switchable Single/Dual Edge Registers for Pipeline Architecture Singh, Suyash Vardhan Mahto, Rakeshkumar Hardware Architecture The demand for low power processing is increasing due to mobile and portable devices. In a processor unit, an adder is an important building block since it is used in Floating Point Units (FPU) and Arithmetic Logic Units (ALU). Also, pipeline techniques are used extensively to improve the throughput of the processing unit. To implement a pipeline requires adding a register at each sub-stage that result in increasing the latency. Moreover, designing a low power pipeline adder with low latency has drawn a lot of attention. In a pipelined architecture that uses Dual Edge Triggered (DET) based registers can help in reducing the latency since they can capture input data at both clock edges. However, for high input activity, a DET flip-flop consumes more power than a Single-Edge Triggered (SET) flip-flop. Moreover, it is required to replace each Flip-Flop (FF) in the processor with Dual Edge Triggered (DET) Flip-Flop which will be a considerable area and power overhead. Therefore, it is desirable to have a switchable DET to SET depending on input activity or load condition to reduce the dynamic power consumption. In this paper, we are proposing a new shift register which imitates DET FF based shift register without the need of special DET FF. The proposed shift register improved the latency in a 4-bit pipelined adder by two-fold. Additionally, the power delay product was reduced by 44.16 %. |
| title | Switchable Single/Dual Edge Registers for Pipeline Architecture |
| topic | Hardware Architecture |
| url | https://arxiv.org/abs/2404.12306 |