Cover Image

Ultra-stable 3D-printed precision voltage divider for calibrations and experiments

Fuente: arXiv

Saved in:

Bibliographic Details
Main Authors:	Passon, Stephan, König, Kristian, Schilling, Florian, Maaß, Bernhard, Meisner, Johann, Nörtershäuser, Wilfried
Format:	Preprint
Published:	2024
Subjects:	Instrumentation and Detectors
Online Access:	Acceder al recurso
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

High Voltage Determination and Stabilization for Collinear Laser Spectroscopy Applications
by: König, Kristian, et al.
Published: (2024)

A precision 32 keV angular-selective photoelectron source for calibration measurements at the KATRIN experiment
by: Schneidewind, Sonja, et al.
Published: (2026)

Ultra-high precision high voltage system for PTOLEMY
by: Ammendola, R., et al.
Published: (2025)

Development of a time calibration system for the KLM upgrade in the Belle II experiment
by: Liu, Ziyu, et al.
Published: (2025)

Resistance standards with calculable, nearly negligible AC-DC difference at frequencies up to 2 MHz for the calibration of precision LCR meters
by: Schurr, Jürgen, et al.
Published: (2024)

High-precision beam profile measurement with a microchannel-plate detector in the high magnetic field of the WISArD experiment
by: Lecanuet, S., et al.
Published: (2026)

A new diffuse reflector filament for additive manufacturing of 3D printing finely-segmented plastic scintillator
by: Berns, S., et al.
Published: (2025)

A new diffuse reflector filament for additive manufacturing of 3D printing finely-segmented plastic scintillator
by: Krech, A., et al.
Published: (2026)

A newly developed multi-kilo-channel high-speed and precision waveform digitization system for neutrino experiments
by: Yang, H., et al.
Published: (2024)

Removal of high-voltage-induced surface charges by ultraviolet light
by: Ziemba, M. T., et al.
Published: (2025)

Ultra-High precision Compton polarimetry at 2 GeV
by: Zec, A., et al.
Published: (2024)

Ultra-high precision comb-locked terahertz frequency-domain spectroscopy of whispering-gallery modes
by: Müller, Sebastian, et al.
Published: (2024)

Development of Small-pitch, Ultra-thin 3D Silicon Sensors at USTC
by: Ma, Kuo, et al.
Published: (2026)

High voltage and electrode system for a cryogenic experiment to search for the neutron electric dipole moment
by: Blatnik, M. A., et al.
Published: (2025)

On the application of components manufactured with stereolithographic 3D printing in high vacuum systems
by: Radic, Aleksandar, et al.
Published: (2024)

Real-time calibrations for future detectors at FAIR
by: Kladov, Valentin, et al.
Published: (2025)

Energy calibration of bulk events in the BULLKID detector
by: Folcarelli, M., et al.
Published: (2025)

Comparison calibration system for digital-output infrasound sensors
by: Hirano, Koto, et al.
Published: (2025)

Sensor operating point calibration and monitoring of the ALICE Inner Tracking System during LHC Run 3
by: Agguiaro, D., et al.
Published: (2025)

From the Virgo interferometer calibration to the bias and uncertainty of the h(t) detector strain during the O4 run
by: Grimaud, Cervane, et al.
Published: (2025)

Customized calibration sources in the JUNO experiment
by: Takenaka, Akira, et al.
Published: (2024)

The LED calibration systems for the mDOM and D-Egg sensor modules of the IceCube Upgrade
by: Abbasi, R., et al.
Published: (2025)

From real-time calibrations to smart HV tuning for FAIR
by: Kladov, Valentin, et al.
Published: (2025)

Discharge quenching mechanism and performance of RPWELL with tunable 3D printed resistive plates, charge evacuation in semiconductive glass RPWELL and discharge quenching for Cryogenic-RWELL over a wide range of resistivity
by: Jash, Abhik, et al.
Published: (2024)

uRWELL detector developments at Jefferson Lab for high luminosity experiments
by: Gnanvo, Kondo, et al.
Published: (2024)

Ultra-cold neutron simulation framework for the free neutron lifetime experiment $τ$SPECT
by: Auler, Julian, et al.
Published: (2025)

Controlling the recovery time of the superconducting nanowire single-photon detector with a voltage-controlled cryogenic tunable resistor
by: Wang, Hui, et al.
Published: (2025)

Photocathode characterisation for robust PICOSEC Micromegas precise-timing detectors
by: Lisowska, M., et al.
Published: (2024)

Advances in photocathode development for PICOSEC Micromegas precise-timing detectors
by: Lisowska, M., et al.
Published: (2026)

Spatial resolution improvement of PICOSEC Micromegas precise timing detectors
by: Brunbauer, F. M., et al.
Published: (2026)

Drift time calibration of the ultra-low material budget GEM-based TPC for MIXE
by: Zhao, X., et al.
Published: (2025)

Comparison of the detector response and calibration function of metallic microcalorimeters for X-ray photons and external electrons
by: Kovac, Neven, et al.
Published: (2025)

Effects of 3D printed capsule material on activation thin foil irradiation and counting for fusion neutron yield measurements
by: Lobelo, D., et al.
Published: (2026)

3D-printed components for electron-ion trapping: Pre-experimental tests of functionality and ultra-high vacuum compatibility
by: Kumar, Vineet, et al.
Published: (2025)

Developing a Network Discovery Protocol for the Constellation Control and Data Acquisition Framework
by: Lachnit, Stephan
Published: (2025)

Performance evaluation of the high-voltage CMOS active pixel sensor AstroPix for gamma-ray space telescopes
by: Suda, Yusuke, et al.
Published: (2024)

Study of the energy calibration of the DEAP-3600 detector using $^{22}\mathrm{Na}$ source data and simulations
by: Luzzi, Ludovico
Published: (2026)

A novel nuclear recoil calibration for liquid noble gas detectors
by: Gu, Fengbo, et al.
Published: (2023)

Development of advanced photon calibrator for Kamioka gravitational wave detector (KAGRA)
by: Inoue, Y., et al.
Published: (2023)

A beam-driven proton irradiation setup for precision radiation damage tests of silicon detectors
by: Wolf, Pascal, et al.
Published: (2024)