LuSEE-Night power requirements and power generation strategy
Fuente:
arXiv
Guardado en:
| Autores principales: | , , , , , , |
|---|---|
| Formato: | Preprint |
| Publicado: |
2024
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1866910521206243328 |
|---|---|
| author | Saliwanchik, Benjamin R. B. Herrmann, Sven Kotov, Ivan O'Connor, Paul Potekhin, Maxim Slosar, Anže Bale, Stuart |
| author_facet | Saliwanchik, Benjamin R. B. Herrmann, Sven Kotov, Ivan O'Connor, Paul Potekhin, Maxim Slosar, Anže Bale, Stuart |
| contents | The Lunar Surface Electromagnetics Experiment at Night (LuSEE-Night) is a project designed to investigate the feasibility of observing the Cosmic Dark Ages using an instrument on the lunar far-side. LuSEE-Night will measure the redshifted 21 cm transition of neutral hydrogen over a frequency range of 0.1-50 MHz, covering the redshift range 27 < z < 1100. The LuSEE-Night instrument is a radio frequency spectrometer, consisting of four horizontal monopole antennas, arranged to give wide zenith-pointing beams with two orthogonal linear polarizations. This combination of polarization, spectral, and angular sensitivity will be necessary to separate the cosmological signal from significantly stronger foreground emissions. LuSEE-Night will observe in drift scan during lunar night while the moon shields it from radio frequency interference from both the Earth and sun, and will transmit science and telemetry data back to Earth via an orbital relay during the lunar day. LuSEE-Night will have to operate in a challenging environment: its electronics must operate under hard radiation, the instrument must be thermally isolated during the cold 100~K lunar night, and have a thermal rejection path to survive the 390~K daytime temperature, and its photovoltaic and battery systems must provide sufficient power to operate during two weeks of lunar night. Furthermore, the instrument spectrometer must be powered throughout the lunar night using only a 7~kWh battery, due to mass limitations. Here we describe the power generation, storage, and delivery subsystems of the LuSEE-Night instrument, and the simulations which were performed to design the power subsystems and ensure instrument survival and operation throughout the long lunar night. We also describe the Concept of Operations (ConOps) developed for the LuSEE-Night mission, which derives from the power management simulations. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2407_07173 |
| institution | arXiv |
| publishDate | 2024 |
| record_format | arxiv |
| spellingShingle | LuSEE-Night power requirements and power generation strategy Saliwanchik, Benjamin R. B. Herrmann, Sven Kotov, Ivan O'Connor, Paul Potekhin, Maxim Slosar, Anže Bale, Stuart Instrumentation and Methods for Astrophysics Cosmology and Nongalactic Astrophysics The Lunar Surface Electromagnetics Experiment at Night (LuSEE-Night) is a project designed to investigate the feasibility of observing the Cosmic Dark Ages using an instrument on the lunar far-side. LuSEE-Night will measure the redshifted 21 cm transition of neutral hydrogen over a frequency range of 0.1-50 MHz, covering the redshift range 27 < z < 1100. The LuSEE-Night instrument is a radio frequency spectrometer, consisting of four horizontal monopole antennas, arranged to give wide zenith-pointing beams with two orthogonal linear polarizations. This combination of polarization, spectral, and angular sensitivity will be necessary to separate the cosmological signal from significantly stronger foreground emissions. LuSEE-Night will observe in drift scan during lunar night while the moon shields it from radio frequency interference from both the Earth and sun, and will transmit science and telemetry data back to Earth via an orbital relay during the lunar day. LuSEE-Night will have to operate in a challenging environment: its electronics must operate under hard radiation, the instrument must be thermally isolated during the cold 100~K lunar night, and have a thermal rejection path to survive the 390~K daytime temperature, and its photovoltaic and battery systems must provide sufficient power to operate during two weeks of lunar night. Furthermore, the instrument spectrometer must be powered throughout the lunar night using only a 7~kWh battery, due to mass limitations. Here we describe the power generation, storage, and delivery subsystems of the LuSEE-Night instrument, and the simulations which were performed to design the power subsystems and ensure instrument survival and operation throughout the long lunar night. We also describe the Concept of Operations (ConOps) developed for the LuSEE-Night mission, which derives from the power management simulations. |
| title | LuSEE-Night power requirements and power generation strategy |
| topic | Instrumentation and Methods for Astrophysics Cosmology and Nongalactic Astrophysics |
| url | https://arxiv.org/abs/2407.07173 |