Transition reversal over a blunt plate at Mach 5

Fuente: arXiv
Saved in:
Bibliographic Details
Main Authors: Guo, Peixu, Hao, Jiaao, Wen, Chih-Yung
Format: Preprint
Published: 2024
Subjects:
Online Access:
Tags: Add Tag
No Tags, Be the first to tag this record!
_version_ 1866913706387963904
author Guo, Peixu
Hao, Jiaao
Wen, Chih-Yung
author_facet Guo, Peixu
Hao, Jiaao
Wen, Chih-Yung
contents In this work, the stability and transition to turbulence over a blunt flat plate with different leading-edge radii are investigated computationally. The freestream Mach number is 5, the unit Reynolds number is $6\times10^7$ m$^{-1}$, and the maximum nose-tip radius 3 mm exceeds the experimental reversal value. High-resolution numerical simulation and stability analysis are performed. Three-dimensional broadband perturbation is added on the farfield boundary to initiate the transition. The highlight of this work is that the complete physical process is considered, including the three-dimensional receptivity, linear and nonlinear instabilities, and transition. The experimental reversal phenomenon is favourably reproduced in the numerical simulation for the first time. Linear stability analysis shows that unstable first and second modes are absent in the blunt-plate flows owing to the presence of the entropy layer, although these modes are evident in the sharp-leading-edge case. Therefore, the transition on the blunt plate is due to nonmodal instabilities. Numerical results for all the blunt-plate cases reveal the formation of streamwise streaky structures downstream of the nose (stage I) and then the presence of intermittent turbulent spots in the transitional region (stage II). In stage I, a preferential spanwise wavelength of around 0.9 mm is selected for all the nose-tip radii, and low-frequency components are dominant. In stage II, high-frequency secondary instabilities appear to grow, which participate in the eventual breakdown. By contrast, leading-edge streaks are not remarkable in the sharp-leading-edge case, where transition is induced by oblique first and Mack second modes. The transition reversal beyond the critical nose-tip radius arises from an increasing magnitude of the streaky response in the early stage, while the transition mechanism keeps similar qualitatively.
format Preprint
id arxiv_https___arxiv_org_abs_2407_21629
institution arXiv
publishDate 2024
record_format arxiv
spellingShingle Transition reversal over a blunt plate at Mach 5
Guo, Peixu
Hao, Jiaao
Wen, Chih-Yung
Fluid Dynamics
In this work, the stability and transition to turbulence over a blunt flat plate with different leading-edge radii are investigated computationally. The freestream Mach number is 5, the unit Reynolds number is $6\times10^7$ m$^{-1}$, and the maximum nose-tip radius 3 mm exceeds the experimental reversal value. High-resolution numerical simulation and stability analysis are performed. Three-dimensional broadband perturbation is added on the farfield boundary to initiate the transition. The highlight of this work is that the complete physical process is considered, including the three-dimensional receptivity, linear and nonlinear instabilities, and transition. The experimental reversal phenomenon is favourably reproduced in the numerical simulation for the first time. Linear stability analysis shows that unstable first and second modes are absent in the blunt-plate flows owing to the presence of the entropy layer, although these modes are evident in the sharp-leading-edge case. Therefore, the transition on the blunt plate is due to nonmodal instabilities. Numerical results for all the blunt-plate cases reveal the formation of streamwise streaky structures downstream of the nose (stage I) and then the presence of intermittent turbulent spots in the transitional region (stage II). In stage I, a preferential spanwise wavelength of around 0.9 mm is selected for all the nose-tip radii, and low-frequency components are dominant. In stage II, high-frequency secondary instabilities appear to grow, which participate in the eventual breakdown. By contrast, leading-edge streaks are not remarkable in the sharp-leading-edge case, where transition is induced by oblique first and Mack second modes. The transition reversal beyond the critical nose-tip radius arises from an increasing magnitude of the streaky response in the early stage, while the transition mechanism keeps similar qualitatively.
title Transition reversal over a blunt plate at Mach 5
topic Fluid Dynamics
url https://arxiv.org/abs/2407.21629