Buchumschlag

Dissolution zone model of the oxide structure in additively manufactured dispersion-strengthened alloys

Fuente: arXiv

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Hou, Wenyuan, Stubbs, Timothy, DeBeer-Schmitt, Lisa, Chang, Yen-Ting, Charpagne, Marie-Agathe, Smith, Timothy M., Huang, Aijun, Cordero, Zachary C.
Format:	Preprint
Veröffentlicht:	2024
Schlagworte:	Materials Science
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

The role of radiation-induced segregation in defect-phase formation in Ni-Ge and Ni-Si alloys
von: Verma, Amit, et al.
Veröffentlicht: (2026)

Combined X‐Ray Emission Spectroscopy at Phosphorus and Nickel: Detecting Subtle Changes in Catalyst Electronic Structure at High Resolution (Small 37/2025)
von: Zachary Mathe, et al.
Veröffentlicht: (2025)

Combined X‐Ray Emission Spectroscopy at Phosphorus and Nickel: Detecting Subtle Changes in Catalyst Electronic Structure at High Resolution
von: Zachary Mathe, et al.
Veröffentlicht: (2025)

Direct consolidation of an oxide dispersion strengthened alloy by hot rotary swaging
von: L. Kunčická, et al.
Veröffentlicht: (2024)

Limits of dispersoid size and number density in oxide dispersion strengthened alloys fabricated with powder bed fusion-laser beam
von: Wassermann, Nathan A., et al.
Veröffentlicht: (2023)

Optimization of Ray-tracing Simulations to Confirm Performance of the GP-SANS Instrument at the High-Flux Isotope Reactor
von: Rogers, James M., et al.
Veröffentlicht: (2024)

Harnessing metastability for grain size control in multiprincipal element alloys during additive manufacturing
von: Wakai, Akane, et al.
Veröffentlicht: (2024)

Synergistic strengthening of additively manufactured NiTi shape memory alloys via amorphous/lamellar and core/shell dual structures
von: Hu‐Wen Ma, et al.
Veröffentlicht: (2025)

Residual stresses in steel I‐section beams strengthened by wire arc additive manufacturing
von: Jiachi Yang, et al.
Veröffentlicht: (2025)

Emergence of rapid solidification microstructure in additive manufacturing of a Magnesium alloy
von: Tourret, D., et al.
Veröffentlicht: (2024)

Tribological study of hot pressed oxide dispersion strengthened 2205 DSS composite
von: O. Olaniran
Veröffentlicht: (2014)

Laser-scanning of induction-melted Al alloys: are they representative of additively manufactured ones?
von: Ge, Zhaoxuan, et al.
Veröffentlicht: (2024)

Unveiling the heat‐resistant mechanism of an additively manufactured Ag– and Ti‐modified Al–Cu–Mg alloy
von: Xi‐Zhen Xia, et al.
Veröffentlicht: (2025)

High‐throughput preparation for alloy composition design in additive manufacturing: A comprehensive review
von: Min Liu, et al.
Veröffentlicht: (2024)

A review of the microstructure and tensile behavior of additively manufactured metastable β Ti alloys
von: Elena Pereloma
Veröffentlicht: (2024)

Review of additively manufactured zinc alloys by laser powder bed fusion for biomedical applications
von: Xuan Yang, et al.
Veröffentlicht: (2025)

Tunable kHz distributed feedback fiber laser enabled by glass additive-manufacturing
von: Maniewski, Pawel, et al.
Veröffentlicht: (2024)

Role of chromium oxides and carbides in strengthening CoCrFeNi multi-principle element alloys
von: Olejarz, Artur, et al.
Veröffentlicht: (2025)

Correlation between Complex Spin Textures and the Magnetocaloric and Hall Effects in Eu(Ga$_{1-x}$Al$_x$)$_4$ ($x$ = 0.9, 1)
von: Neubauer, Kelly J., et al.
Veröffentlicht: (2025)

Development of transparent, particle‐loaded photoresins for volumetric additive manufacturing of silica glass
von: Luke A. Myers, et al.
Veröffentlicht: (2024)

Polymer‐based filaments with embedded magnetocaloric Ni‐Mn‐Ga Heusler alloy particles for additive manufacturing
von: Álvaro Díaz‐García, et al.
Veröffentlicht: (2024)

Statistical Validation of Contagion Centrality in Financial Networks
von: Sadeghi, Agathe, et al.
Veröffentlicht: (2024)

Liquidation Dynamics in DeFi and the Role of Transaction Fees
von: Sadeghi, Agathe, et al.
Veröffentlicht: (2026)

The industrialization of additive manufacturing
Veröffentlicht: (2024)

Beyond Discharge: A Scoping Review of the Long‐Term Outcomes of Congenital Diaphragmatic Hernia in Australia
von: Casey Stubbs, et al.
Veröffentlicht: (2026)

High‐throughput additive manufacturing and characterization of CoCrFeNi–AlTi high‐entropy alloys
von: Xiu‐Xiu Lv, et al.
Veröffentlicht: (2024)

Atomic‐scale understanding of interstitial‐strengthened high‐entropy alloys
von: Qiang Yu, et al.
Veröffentlicht: (2025)

Evaluating the sintering behaviors of ceramic oxide powders processed via binder jet additive manufacturing
von: Edgar Mendoza Jimenez, et al.
Veröffentlicht: (2024)

Bridging additive and subtractive manufacturing
von: Daniel Holder, et al.
Veröffentlicht: (2024)

Shear bond strength of vat photopolymerization additive‐manufactured zirconia to veneering ceramic
von: Yue Zhu, et al.
Veröffentlicht: (2025)

Stress field modification near linear complexions increases the effective obstacle size and strengthening effect
von: Zhang, Zhengyu, et al.
Veröffentlicht: (2026)

Dissolution index and shell weights of planktonic foraminifera
von: Mekik, Figen, et al.
Veröffentlicht: (2008)

Martensite decomposition kinetics in additively manufactured Ti-6Al-4V alloy: in-situ characterisation and phase-field modelling
von: Boccardo, A. D., et al.
Veröffentlicht: (2024)

Cover Feature: Understanding the P‐Cluster of Vanadium Nitrogenase: an EPR and XAS Study of the Holo vs. Apo Forms of the Enzyme (ChemBioChem 3/2025)
von: Isis M. Wahl, et al.
Veröffentlicht: (2025)

Describing additional fluxes to deep sediment traps and water-column decay in a coastal environment
von: Timothy, D., Pond, S
Veröffentlicht: (1991)

Automatic exposure volumetric additive manufacturing
von: Orth, Antony, et al.
Veröffentlicht: (2025)

Energy dispersive spectroscopic data from samples from IODP Site M0077 from the Chicxulub Crater
von: Bralower, Timothy J
Veröffentlicht: (2019)

An introduction to coastal zone management / Timothy Beatley, David J. Brower, Anna K. Schwab
von: Beatley, Timothy, (1957-)
Veröffentlicht: (1957)

Hot isostatic pressing synergistically enhances the strength and plasticity of EV31A magnesium alloy fabricated by wire arc additive manufacturing
von: Jinyi Li, et al.
Veröffentlicht: (2026)

Effect of process variables on heat transfer and the product quality during layer deposition of Al4043 alloy by wire arc additive manufacturing
von: K. Raghavendra Pai, et al.
Veröffentlicht: (2024)