Characterization and optimization of high-efficiency crystalline silicon solar cells
Fuente:
arXiv
Guardado en:
| Autores principales: | , , , , |
|---|---|
| Formato: | Preprint |
| Publicado: |
2024
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1866913488490725376 |
|---|---|
| author | Kostylyov, V. P. Sachenko, A. V. Evstigneev, M. Sokolovskyi, I. O. Shkrebtii, A. I. |
| author_facet | Kostylyov, V. P. Sachenko, A. V. Evstigneev, M. Sokolovskyi, I. O. Shkrebtii, A. I. |
| contents | Since the photoconversion efficiency $η$ of the silicon-based solar cells (SCs) under laboratory conditions is approaching the theoretical fundamental limit, further improvement of their performance requires theoretical modeling and/or numerical simulation to optimize the SCs parameters and design. The existing numerical approaches to modeling and optimization of the key parameters of high-efficiency solar cells based on monocrystalline silicon (c-Si), the dominant material in photovoltaics, are described. It is shown that, in addition to the four usually considered recombination processes, namely, Shockley-Read-Hall, surface, radiative, and band-to-band Auger recombination mechanisms, the non-radiative exciton Auger recombination and recombination in the space charge region (SCR) have to be included. To develop the analytical SC characterization formalism, we proposed a simple expression to model the wavelength-dependent external quantum efficiency (EQE) of the photocurrent near the absorption edge. Based on this parameterization, the theory developed allows for calculating and optimizing the base thickness-dependent short-circuit current, the open-circuit voltage, and the SC photoconversion efficiency. We proved that the approach to optimize the solar cell parameters, especially its thickness and the base doping level, is accurate and demonstrated for the two Si solar cells reported in the literature, one with an efficiency of 26.7 % and the other with the record efficiency of 26.81 %. It is shown that the formalism developed allows further optimization of the solar cell thickness and doping level, thus increasing the SC efficiency to an even higher value. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2409_01101 |
| institution | arXiv |
| publishDate | 2024 |
| record_format | arxiv |
| spellingShingle | Characterization and optimization of high-efficiency crystalline silicon solar cells Kostylyov, V. P. Sachenko, A. V. Evstigneev, M. Sokolovskyi, I. O. Shkrebtii, A. I. Materials Science Other Condensed Matter Since the photoconversion efficiency $η$ of the silicon-based solar cells (SCs) under laboratory conditions is approaching the theoretical fundamental limit, further improvement of their performance requires theoretical modeling and/or numerical simulation to optimize the SCs parameters and design. The existing numerical approaches to modeling and optimization of the key parameters of high-efficiency solar cells based on monocrystalline silicon (c-Si), the dominant material in photovoltaics, are described. It is shown that, in addition to the four usually considered recombination processes, namely, Shockley-Read-Hall, surface, radiative, and band-to-band Auger recombination mechanisms, the non-radiative exciton Auger recombination and recombination in the space charge region (SCR) have to be included. To develop the analytical SC characterization formalism, we proposed a simple expression to model the wavelength-dependent external quantum efficiency (EQE) of the photocurrent near the absorption edge. Based on this parameterization, the theory developed allows for calculating and optimizing the base thickness-dependent short-circuit current, the open-circuit voltage, and the SC photoconversion efficiency. We proved that the approach to optimize the solar cell parameters, especially its thickness and the base doping level, is accurate and demonstrated for the two Si solar cells reported in the literature, one with an efficiency of 26.7 % and the other with the record efficiency of 26.81 %. It is shown that the formalism developed allows further optimization of the solar cell thickness and doping level, thus increasing the SC efficiency to an even higher value. |
| title | Characterization and optimization of high-efficiency crystalline silicon solar cells |
| topic | Materials Science Other Condensed Matter |
| url | https://arxiv.org/abs/2409.01101 |