Enregistré dans:
| Auteurs principaux: | , , , , |
|---|---|
| Format: | Preprint |
| Publié: |
2024
|
| Sujets: | |
| Accès en ligne: | https://arxiv.org/abs/2409.03293 |
| Tags: |
Ajouter un tag
Pas de tags, Soyez le premier à ajouter un tag!
|
| _version_ | 1866916382951604224 |
|---|---|
| author | Michez, Damien Letellier, Juliette Hammas, Imane Pernot, Julien Rouger, Nicolas C. |
| author_facet | Michez, Damien Letellier, Juliette Hammas, Imane Pernot, Julien Rouger, Nicolas C. |
| contents | This letter presents the bulk diamond field-effect transistor (FET) with the highest current value reported at this moment. The goal was to drastically increase the current of this type of device by increasing the total gate width thanks to an interdigitated architecture and homogeneous growth properties. We report the results obtained by fabricating and characterizing an interdigitated junction FET (JFET). The device develops a total gate width of 14.7 mm, with 24 paralleled fingers and a current higher than 50 mA at VDS = -15 V, VGS = 0 V, at 450 K and under illumination which is the highest value reported for a bulk diamond FET. Its specific ON-resistance and threshold voltage are respectively 608 m$Ω$.cm${}^2$, 50 V. From Transfer length method (TLM) measurements we extract a resistivity of 3.6 m$Ω$.cm for a heavily boron-doped (p++)-diamond layer and 1.52 $Ω$.cm for a 2.1017 cm-3 p-doped diamond layer at 450 K. We measured the drain current versus gate voltage characteristics at high temperature showing that it is no longer the conduction channel resistance but the device access resistance that is predominant. This study indicates that it is possible to drastically improve the ON-state of FETs by using an interdigitated architecture, while using homogeneous large size diamond layers grown by CVD. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2409_03293 |
| institution | arXiv |
| publishDate | 2024 |
| record_format | arxiv |
| spellingShingle | Over 50 mA current in interdigitated diamond field effect transistor Michez, Damien Letellier, Juliette Hammas, Imane Pernot, Julien Rouger, Nicolas C. Applied Physics Materials Science This letter presents the bulk diamond field-effect transistor (FET) with the highest current value reported at this moment. The goal was to drastically increase the current of this type of device by increasing the total gate width thanks to an interdigitated architecture and homogeneous growth properties. We report the results obtained by fabricating and characterizing an interdigitated junction FET (JFET). The device develops a total gate width of 14.7 mm, with 24 paralleled fingers and a current higher than 50 mA at VDS = -15 V, VGS = 0 V, at 450 K and under illumination which is the highest value reported for a bulk diamond FET. Its specific ON-resistance and threshold voltage are respectively 608 m$Ω$.cm${}^2$, 50 V. From Transfer length method (TLM) measurements we extract a resistivity of 3.6 m$Ω$.cm for a heavily boron-doped (p++)-diamond layer and 1.52 $Ω$.cm for a 2.1017 cm-3 p-doped diamond layer at 450 K. We measured the drain current versus gate voltage characteristics at high temperature showing that it is no longer the conduction channel resistance but the device access resistance that is predominant. This study indicates that it is possible to drastically improve the ON-state of FETs by using an interdigitated architecture, while using homogeneous large size diamond layers grown by CVD. |
| title | Over 50 mA current in interdigitated diamond field effect transistor |
| topic | Applied Physics Materials Science |
| url | https://arxiv.org/abs/2409.03293 |