Discontinuous Reception with Adjustable Inactivity Timer for IIoT
Fuente:
arXiv
Gespeichert in:
| Hauptverfasser: | , , , , , |
|---|---|
| Format: | Preprint |
| Veröffentlicht: |
2024
|
| Schlagworte: | |
| Online-Zugang: | |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| _version_ | 1866917787568439296 |
|---|---|
| author | Ruíz-Guirola, David E. Rodríguez-López, Carlos A. López, Onel L. A. Montejo-Sánchez, Samuel Reguera, Vitalio Alfonso Latva-aho, Matti |
| author_facet | Ruíz-Guirola, David E. Rodríguez-López, Carlos A. López, Onel L. A. Montejo-Sánchez, Samuel Reguera, Vitalio Alfonso Latva-aho, Matti |
| contents | Discontinuous reception (DRX) is a key technology for reducing the energy consumption of industrial Internet of Things (IIoT) devices. Specifically, DRX allows the devices to operate in a low-power mode when no data reception is scheduled, and its effectiveness depends on the proper configuration of the DRX parameters. In this paper, we characterize the DRX process departing from a semi-Markov chain modeling. We detail two ways to set DRX parameters to minimize the device power consumption while meeting a mean delay constraint. The first method exhaustively searches for the optimal configuration. In contrast, the second method uses a low-complexity metaheuristic to find a sub-optimal configuration, thus considering ideal and practical DRX configurations. Notably, within the DRX parameters, the inactivity timer (IT) is a caution time that specifies how long a device remains active after the last information exchange. Traditionally, a device implementing DRX will restart the IT after each data reception as a precedent to a low-power mode. The usual approach lies in restarting the IT whenever new data is received during this cautious period, which might sometimes needlessly extend the active time. Herein, we propose a more efficient method in which the transmit base station (BS) explicitly indicates restarting the timer through the control channel only when appropriate. The decision is taken based on the BS's knowledge about its buffer status. We consider Poisson and bursty traffic models, which are typical in IIoT setups, and verify the suitability of our proposal for reducing the energy consumption of the devices without significantly compromising the communication latency through extensive numerical simulations. Specifically, energy-saving gains of up to 30% can be obtained regardless of the arrival rate and delay constraints. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2409_17881 |
| institution | arXiv |
| publishDate | 2024 |
| record_format | arxiv |
| spellingShingle | Discontinuous Reception with Adjustable Inactivity Timer for IIoT Ruíz-Guirola, David E. Rodríguez-López, Carlos A. López, Onel L. A. Montejo-Sánchez, Samuel Reguera, Vitalio Alfonso Latva-aho, Matti Systems and Control Discontinuous reception (DRX) is a key technology for reducing the energy consumption of industrial Internet of Things (IIoT) devices. Specifically, DRX allows the devices to operate in a low-power mode when no data reception is scheduled, and its effectiveness depends on the proper configuration of the DRX parameters. In this paper, we characterize the DRX process departing from a semi-Markov chain modeling. We detail two ways to set DRX parameters to minimize the device power consumption while meeting a mean delay constraint. The first method exhaustively searches for the optimal configuration. In contrast, the second method uses a low-complexity metaheuristic to find a sub-optimal configuration, thus considering ideal and practical DRX configurations. Notably, within the DRX parameters, the inactivity timer (IT) is a caution time that specifies how long a device remains active after the last information exchange. Traditionally, a device implementing DRX will restart the IT after each data reception as a precedent to a low-power mode. The usual approach lies in restarting the IT whenever new data is received during this cautious period, which might sometimes needlessly extend the active time. Herein, we propose a more efficient method in which the transmit base station (BS) explicitly indicates restarting the timer through the control channel only when appropriate. The decision is taken based on the BS's knowledge about its buffer status. We consider Poisson and bursty traffic models, which are typical in IIoT setups, and verify the suitability of our proposal for reducing the energy consumption of the devices without significantly compromising the communication latency through extensive numerical simulations. Specifically, energy-saving gains of up to 30% can be obtained regardless of the arrival rate and delay constraints. |
| title | Discontinuous Reception with Adjustable Inactivity Timer for IIoT |
| topic | Systems and Control |
| url | https://arxiv.org/abs/2409.17881 |