Reconfigurable hydrostatics: Toward versatile and efficient load-bearing robotics
Fuente:
arXiv
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | Preprint |
| Published: |
2024
|
| Subjects: | |
| Online Access: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866908651720015872 |
|---|---|
| author | Denis, Jeff Laberge, Frederic Plante, Jean-Sebastien Girard, Alexandre |
| author_facet | Denis, Jeff Laberge, Frederic Plante, Jean-Sebastien Girard, Alexandre |
| contents | Wearable and legged robot designers face multiple challenges when choosing actuation. Traditional fully actuated designs using electric motors are multifunctional but oversized and inefficient for bearing conservative loads and for being backdrivable. Alternatively, quasi-passive and underactuated designs reduce the amount of motorization and energy storage, but are often designed for specific tasks. Designers of versatile and stronger wearable robots will face these challenges unless future actuators become very torque-dense, backdrivable and efficient
This paper explores a design paradigm for addressing this issue: reconfigurable hydrostatics. We show that a hydrostatic actuator can integrate a passive force mechanism and a sharing mechanism in the fluid domain and still be multifunctional. First, an analytical study compares the effect of these two mechanisms on the motorization requirements in the context of a load-bearing exoskeleton. Then, the hydrostatic concept integrating these two mechanisms using hydraulic components is presented. A case study analysis shows the mass/efficiency/inertia benefits of the concept over a fully actuated one. Then, experiments are conducted on robotic legs to demonstrate that the actuator concept can meet the expected performance in terms of force tracking, versatility, and efficiency under controlled conditions. The proof-of-concept can track the vertical ground reaction force (GRF) profiles of walking, running, squatting, and jumping, and the energy consumption is 4.8x lower for walking. The transient force behaviors due to switching from one leg to the other are also analyzed along with some mitigation to improve them. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2410_17936 |
| institution | arXiv |
| publishDate | 2024 |
| record_format | arxiv |
| spellingShingle | Reconfigurable hydrostatics: Toward versatile and efficient load-bearing robotics Denis, Jeff Laberge, Frederic Plante, Jean-Sebastien Girard, Alexandre Robotics Systems and Control Wearable and legged robot designers face multiple challenges when choosing actuation. Traditional fully actuated designs using electric motors are multifunctional but oversized and inefficient for bearing conservative loads and for being backdrivable. Alternatively, quasi-passive and underactuated designs reduce the amount of motorization and energy storage, but are often designed for specific tasks. Designers of versatile and stronger wearable robots will face these challenges unless future actuators become very torque-dense, backdrivable and efficient This paper explores a design paradigm for addressing this issue: reconfigurable hydrostatics. We show that a hydrostatic actuator can integrate a passive force mechanism and a sharing mechanism in the fluid domain and still be multifunctional. First, an analytical study compares the effect of these two mechanisms on the motorization requirements in the context of a load-bearing exoskeleton. Then, the hydrostatic concept integrating these two mechanisms using hydraulic components is presented. A case study analysis shows the mass/efficiency/inertia benefits of the concept over a fully actuated one. Then, experiments are conducted on robotic legs to demonstrate that the actuator concept can meet the expected performance in terms of force tracking, versatility, and efficiency under controlled conditions. The proof-of-concept can track the vertical ground reaction force (GRF) profiles of walking, running, squatting, and jumping, and the energy consumption is 4.8x lower for walking. The transient force behaviors due to switching from one leg to the other are also analyzed along with some mitigation to improve them. |
| title | Reconfigurable hydrostatics: Toward versatile and efficient load-bearing robotics |
| topic | Robotics Systems and Control |
| url | https://arxiv.org/abs/2410.17936 |