Heterogeneous dynamic restoration of Ti-15Mo alloy during hot compression
Fuente:
arXiv
Saved in:
| Main Authors: | , , , , , , |
|---|---|
| Format: | Preprint |
| Published: |
2024
|
| Subjects: | |
| Online Access: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866915022053048320 |
|---|---|
| author | Shahryari, Esmaeil Poletti, Maria Cecilia Preisler, Dalibor Harcuba, Petr Strasky, Josef Janecek, Milos Warchomicka, Fernando Gustavo |
| author_facet | Shahryari, Esmaeil Poletti, Maria Cecilia Preisler, Dalibor Harcuba, Petr Strasky, Josef Janecek, Milos Warchomicka, Fernando Gustavo |
| contents | Near-beta titanium alloys have shown low Young's modulus and good strength, making them excellent implant candidates. However, their processing using thermomechanical routes in single phase beta region results in heterogeneous microstructures due to high content alloying elements and consequent slow diffusion-controlled processes such as dynamic recovery. This study investigates the deformation behaviour of a Ti-15Mo alloy through hot compression experiments using a Gleeble 3800 device in the single beta domain at strain rates from 0.01 s-1 to 10 s-1, reaching final strains of 0.50 and 0.85 followed by immediate water quench. The findings show that the material presents a low strain rate sensitivity. The flow curves show significant strain hardening before reaching a steady-state regime, particularly at high strain rates. The strain hardening exponent calculations support the effect of molybdenum on retarding softening mechanisms such as dynamic recovery. Electron backscatter diffraction (EBSD) measurements of deformed samples revealed that dynamic recovery is the primary restoration mechanism, with continuous and geometric dynamic recrystallisation evidence. Due to the slow restoration process, we observe the subgrain formation for different deformation parameters. Therefore, we introduced an EBSD-based method to quantify dynamic recovery and subgrain size. We concluded that dynamic recovery and dynamic recrystallisation decrease as the strain rate increases with minimal variation at higher strain rates. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2411_10159 |
| institution | arXiv |
| publishDate | 2024 |
| record_format | arxiv |
| spellingShingle | Heterogeneous dynamic restoration of Ti-15Mo alloy during hot compression Shahryari, Esmaeil Poletti, Maria Cecilia Preisler, Dalibor Harcuba, Petr Strasky, Josef Janecek, Milos Warchomicka, Fernando Gustavo Materials Science Near-beta titanium alloys have shown low Young's modulus and good strength, making them excellent implant candidates. However, their processing using thermomechanical routes in single phase beta region results in heterogeneous microstructures due to high content alloying elements and consequent slow diffusion-controlled processes such as dynamic recovery. This study investigates the deformation behaviour of a Ti-15Mo alloy through hot compression experiments using a Gleeble 3800 device in the single beta domain at strain rates from 0.01 s-1 to 10 s-1, reaching final strains of 0.50 and 0.85 followed by immediate water quench. The findings show that the material presents a low strain rate sensitivity. The flow curves show significant strain hardening before reaching a steady-state regime, particularly at high strain rates. The strain hardening exponent calculations support the effect of molybdenum on retarding softening mechanisms such as dynamic recovery. Electron backscatter diffraction (EBSD) measurements of deformed samples revealed that dynamic recovery is the primary restoration mechanism, with continuous and geometric dynamic recrystallisation evidence. Due to the slow restoration process, we observe the subgrain formation for different deformation parameters. Therefore, we introduced an EBSD-based method to quantify dynamic recovery and subgrain size. We concluded that dynamic recovery and dynamic recrystallisation decrease as the strain rate increases with minimal variation at higher strain rates. |
| title | Heterogeneous dynamic restoration of Ti-15Mo alloy during hot compression |
| topic | Materials Science |
| url | https://arxiv.org/abs/2411.10159 |