Saved in:
| Main Authors: | , , , , , |
|---|---|
| Format: | Preprint |
| Published: |
2024
|
| Subjects: | |
| Online Access: | https://arxiv.org/abs/2411.12624 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Table of Contents:
- The effect of columnar grain boundaries on the fracture toughness was investigated using micro-cantilever fracture testing with a bridge notch, and a unique hard coating consisting of two distinct microstructures: one with columnar grains and another with an epitaxial layer. The bridge-failure sequence qualitatively demonstrated the lower fracture toughness at the columnar-grained structure. Quantitatively, the load drops measured at bridge-failure also revealed a significant decrease in fracture toughness due to grain boundaries. Specifically, the fracture toughness decreased by around 30%, from 4.1 +/- 0.4 MPa m1/2 for epitaxial microstructure to 3.0 +/- 0.3 MPa m1/2 for columnar-grained structure. The fracture toughness of columnar-grained structure is 3.0 +/- 0.2 MPa m1/2 perpendicular to the growth direction higher than 2.7 +/- 0.1 MPa m1/2 along it. These findings suggest that future optimization of hard coatings should focus on grain boundary toughening, and the present toolbox proposes suitable techniques for such microstructure optimization.