NinjaSat: Astronomical X-ray CubeSat Observatory

Fuente: arXiv
Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Tamagawa, Toru, Enoto, Teruaki, Kitaguchi, Takao, Iwakiri, Wataru, Kato, Yo, Numazawa, Masaki, Mihara, Tatehiro, Takeda, Tomoshi, Ota, Naoyuki, Watanabe, Sota, Aoyama, Amira, Iwata, Satoko, Takahashi, Takuya, Yamasaki, Kaede, Hu, Chin-Ping, Takahashi, Hiromitsu, Yoshida, Yuto, Sato, Hiroki, Hayashi, Shoki, Zhou, Yuanhui, Uchiyama, Keisuke, Jujo, Arata, Odaka, Hirokazu, Tamba, Tsubasa, Taniguchi, Kentaro
Format: Preprint
Veröffentlicht: 2024
Schlagworte:
Online-Zugang:
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
_version_ 1866916792306237440
author Tamagawa, Toru
Enoto, Teruaki
Kitaguchi, Takao
Iwakiri, Wataru
Kato, Yo
Numazawa, Masaki
Mihara, Tatehiro
Takeda, Tomoshi
Ota, Naoyuki
Watanabe, Sota
Aoyama, Amira
Iwata, Satoko
Takahashi, Takuya
Yamasaki, Kaede
Hu, Chin-Ping
Takahashi, Hiromitsu
Yoshida, Yuto
Sato, Hiroki
Hayashi, Shoki
Zhou, Yuanhui
Uchiyama, Keisuke
Jujo, Arata
Odaka, Hirokazu
Tamba, Tsubasa
Taniguchi, Kentaro
author_facet Tamagawa, Toru
Enoto, Teruaki
Kitaguchi, Takao
Iwakiri, Wataru
Kato, Yo
Numazawa, Masaki
Mihara, Tatehiro
Takeda, Tomoshi
Ota, Naoyuki
Watanabe, Sota
Aoyama, Amira
Iwata, Satoko
Takahashi, Takuya
Yamasaki, Kaede
Hu, Chin-Ping
Takahashi, Hiromitsu
Yoshida, Yuto
Sato, Hiroki
Hayashi, Shoki
Zhou, Yuanhui
Uchiyama, Keisuke
Jujo, Arata
Odaka, Hirokazu
Tamba, Tsubasa
Taniguchi, Kentaro
contents NinjaSat is an X-ray CubeSat designed for agile, long-term continuous observations of bright X-ray sources, with the size of 6U ($100\times200\times300$ mm$^3$) and a mass of 8 kg. NinjaSat is capable of pointing at X-ray sources with an accuracy of less than $0^{\circ}\hspace{-1.0mm}.1$ (2$σ$ confidence level) with 3-axis attitude control. The satellite bus is a commercially available NanoAvionics M6P, equipped with two non-imaging gas X-ray detectors covering an energy range of 2-50 keV. A total effective area of 32 cm$^2$ at 6 keV is capable of observing X-ray sources with a flux of approximately 10$^{-10}$ erg cm$^{-2}$ s$^{-1}$. The arrival time of each photon can be tagged with a time resolution of 61 $μ$s. The two radiation belt monitors continuously measure the fluxes of protons above 5 MeV and electrons above 200 keV trapped in the geomagnetic field, alerting the X-ray detectors when the flux exceeds a threshold. The NinjaSat project started in 2020. Fabrication of the scientific payloads was completed in August 2022, and satellite integration and tests were completed in July 2023. NinjaSat was launched into a Sun-synchronous polar orbit at an altitude of about 530 km on 2023 November 11 by the SpaceX Transporter-9 mission. After about three months of satellite commissioning and payload verification, we observed the Crab Nebula on February 9, 2024, and successfully detected the 33.8262 ms pulsation from the neutron star. With this observation, NinjaSat met the minimum success criterion and stepped forward to scientific observations as initially planned. By the end of November 2024, we successfully observed 21 X-ray sources using NinjaSat. This achievement demonstrates that, with careful target selection, we can conduct scientific observations effectively using CubeSats, contributing to time-domain astronomy.
format Preprint
id arxiv_https___arxiv_org_abs_2412_03016
institution arXiv
publishDate 2024
record_format arxiv
spellingShingle NinjaSat: Astronomical X-ray CubeSat Observatory
Tamagawa, Toru
Enoto, Teruaki
Kitaguchi, Takao
Iwakiri, Wataru
Kato, Yo
Numazawa, Masaki
Mihara, Tatehiro
Takeda, Tomoshi
Ota, Naoyuki
Watanabe, Sota
Aoyama, Amira
Iwata, Satoko
Takahashi, Takuya
Yamasaki, Kaede
Hu, Chin-Ping
Takahashi, Hiromitsu
Yoshida, Yuto
Sato, Hiroki
Hayashi, Shoki
Zhou, Yuanhui
Uchiyama, Keisuke
Jujo, Arata
Odaka, Hirokazu
Tamba, Tsubasa
Taniguchi, Kentaro
Instrumentation and Methods for Astrophysics
High Energy Astrophysical Phenomena
NinjaSat is an X-ray CubeSat designed for agile, long-term continuous observations of bright X-ray sources, with the size of 6U ($100\times200\times300$ mm$^3$) and a mass of 8 kg. NinjaSat is capable of pointing at X-ray sources with an accuracy of less than $0^{\circ}\hspace{-1.0mm}.1$ (2$σ$ confidence level) with 3-axis attitude control. The satellite bus is a commercially available NanoAvionics M6P, equipped with two non-imaging gas X-ray detectors covering an energy range of 2-50 keV. A total effective area of 32 cm$^2$ at 6 keV is capable of observing X-ray sources with a flux of approximately 10$^{-10}$ erg cm$^{-2}$ s$^{-1}$. The arrival time of each photon can be tagged with a time resolution of 61 $μ$s. The two radiation belt monitors continuously measure the fluxes of protons above 5 MeV and electrons above 200 keV trapped in the geomagnetic field, alerting the X-ray detectors when the flux exceeds a threshold. The NinjaSat project started in 2020. Fabrication of the scientific payloads was completed in August 2022, and satellite integration and tests were completed in July 2023. NinjaSat was launched into a Sun-synchronous polar orbit at an altitude of about 530 km on 2023 November 11 by the SpaceX Transporter-9 mission. After about three months of satellite commissioning and payload verification, we observed the Crab Nebula on February 9, 2024, and successfully detected the 33.8262 ms pulsation from the neutron star. With this observation, NinjaSat met the minimum success criterion and stepped forward to scientific observations as initially planned. By the end of November 2024, we successfully observed 21 X-ray sources using NinjaSat. This achievement demonstrates that, with careful target selection, we can conduct scientific observations effectively using CubeSats, contributing to time-domain astronomy.
title NinjaSat: Astronomical X-ray CubeSat Observatory
topic Instrumentation and Methods for Astrophysics
High Energy Astrophysical Phenomena
url https://arxiv.org/abs/2412.03016