Implementing LoRa MIMO System for Internet of Things
Fuente:
arXiv
Guardado en:
| Autores principales: | , , |
|---|---|
| Formato: | Preprint |
| Publicado: |
2025
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1866910993890672640 |
|---|---|
| author | Ghosh, Atonu Chandan, Sharath Misra, Sudip |
| author_facet | Ghosh, Atonu Chandan, Sharath Misra, Sudip |
| contents | Bandwidth constraints limit LoRa implementations. Contemporary IoT applications require higher throughput than that provided by LoRa. This work introduces a LoRa Multiple Input Multiple Output (MIMO) system and a spatial multiplexing algorithm to address LoRa's bandwidth limitation. The transceivers in the proposed approach modulate the signals on distinct frequencies of the same LoRa band. A Frequency Division Multiplexing (FDM) method is used at the transmitters to provide a wider MIMO channel. Unlike conventional Orthogonal Frequency Division Multiplexing (OFDM) techniques, this work exploits the orthogonality of the LoRa signals facilitated by its proprietary Chirp Spread Spectrum (CSS) modulation to perform an OFDM in the proposed LoRa MIMO system. By varying the Spreading Factor (SF) and bandwidth of LoRa signals, orthogonal signals can transmit on the same frequency irrespective of the FDM. Even though the channel correlation is minimal for different spreading factors and bandwidths, different Carrier Frequencies (CF) ensure the signals do not overlap and provide additional degrees of freedom. This work assesses the proposed model's performance and conducts an extensive analysis to provide an overview of resources consumed by the proposed system. Finally, this work provides the detailed results of a thorough evaluation of the model on test hardware. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2501_07148 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | Implementing LoRa MIMO System for Internet of Things Ghosh, Atonu Chandan, Sharath Misra, Sudip Computers and Society Hardware Architecture Networking and Internet Architecture Systems and Control Bandwidth constraints limit LoRa implementations. Contemporary IoT applications require higher throughput than that provided by LoRa. This work introduces a LoRa Multiple Input Multiple Output (MIMO) system and a spatial multiplexing algorithm to address LoRa's bandwidth limitation. The transceivers in the proposed approach modulate the signals on distinct frequencies of the same LoRa band. A Frequency Division Multiplexing (FDM) method is used at the transmitters to provide a wider MIMO channel. Unlike conventional Orthogonal Frequency Division Multiplexing (OFDM) techniques, this work exploits the orthogonality of the LoRa signals facilitated by its proprietary Chirp Spread Spectrum (CSS) modulation to perform an OFDM in the proposed LoRa MIMO system. By varying the Spreading Factor (SF) and bandwidth of LoRa signals, orthogonal signals can transmit on the same frequency irrespective of the FDM. Even though the channel correlation is minimal for different spreading factors and bandwidths, different Carrier Frequencies (CF) ensure the signals do not overlap and provide additional degrees of freedom. This work assesses the proposed model's performance and conducts an extensive analysis to provide an overview of resources consumed by the proposed system. Finally, this work provides the detailed results of a thorough evaluation of the model on test hardware. |
| title | Implementing LoRa MIMO System for Internet of Things |
| topic | Computers and Society Hardware Architecture Networking and Internet Architecture Systems and Control |
| url | https://arxiv.org/abs/2501.07148 |