Fabrication of self-powered photodetector materials based on Ni-doped ZnO/p-Si heterojunctions
Fuente:
arXiv
Guardado en:
| Autores principales: | , , , |
|---|---|
| Formato: | Preprint |
| Publicado: |
2025
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1866915510117990400 |
|---|---|
| author | Nurfani, Eka Saputra, Aldi Pertiwi, Novalia Arif, Muhamad F. |
| author_facet | Nurfani, Eka Saputra, Aldi Pertiwi, Novalia Arif, Muhamad F. |
| contents | In this paper, Ni-doped ZnO films were grown on a p-type silicon substrate via spray pyrolysis. The Ni dopant concentrations were varied by adjusting the weight ratio between Zinc Acetate Dehydrate (ZAD) and Nickel Chloride Hexahydrate (NCH), resulting in the ZnO, ZnO:Ni1%, and ZnO:Ni3% samples. Field-effect scanning electron microscopy (FESEM) images revealed that Ni doping significantly reduced the nanostructure size from 326 nm (ZnO) to 146 nm (ZnO:Ni3%). Similarly, X-ray diffraction (XRD) analysis also shows the decrease of the crystallite size with increasing Ni doping, from 44 nm (ZnO) to 35 nm (ZnO:Ni3%). Current-voltage (I-V) measurements were conducted at a bias voltage of 0 and 5 V to examine electrical and self-powered photodetection properties. All samples demonstrate self-powered photodetector performance. At the bias of 0 V, the undoped ZnO exhibited a higher photo-to-dark-current ratio (162) as compared to ZnO:Ni1% (18) and ZnO:Ni3% (16). The ZnO:Ni3% samples displayed faster rise (0.4 s) and fall times (1.7 s) as compared to the pure ZnO (10.8 s for rise time and 9.1 s for fall time), highlighting their potential for applications requiring rapid photoresponse. The findings provide valuable insights into optimizing the performance of ZnO-based photodetectors through controlled Ni doping, enabling advancements in self-powered photodetection technology for energy-efficient optoelectronic devices. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2502_05441 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | Fabrication of self-powered photodetector materials based on Ni-doped ZnO/p-Si heterojunctions Nurfani, Eka Saputra, Aldi Pertiwi, Novalia Arif, Muhamad F. Materials Science Applied Physics Chemical Physics In this paper, Ni-doped ZnO films were grown on a p-type silicon substrate via spray pyrolysis. The Ni dopant concentrations were varied by adjusting the weight ratio between Zinc Acetate Dehydrate (ZAD) and Nickel Chloride Hexahydrate (NCH), resulting in the ZnO, ZnO:Ni1%, and ZnO:Ni3% samples. Field-effect scanning electron microscopy (FESEM) images revealed that Ni doping significantly reduced the nanostructure size from 326 nm (ZnO) to 146 nm (ZnO:Ni3%). Similarly, X-ray diffraction (XRD) analysis also shows the decrease of the crystallite size with increasing Ni doping, from 44 nm (ZnO) to 35 nm (ZnO:Ni3%). Current-voltage (I-V) measurements were conducted at a bias voltage of 0 and 5 V to examine electrical and self-powered photodetection properties. All samples demonstrate self-powered photodetector performance. At the bias of 0 V, the undoped ZnO exhibited a higher photo-to-dark-current ratio (162) as compared to ZnO:Ni1% (18) and ZnO:Ni3% (16). The ZnO:Ni3% samples displayed faster rise (0.4 s) and fall times (1.7 s) as compared to the pure ZnO (10.8 s for rise time and 9.1 s for fall time), highlighting their potential for applications requiring rapid photoresponse. The findings provide valuable insights into optimizing the performance of ZnO-based photodetectors through controlled Ni doping, enabling advancements in self-powered photodetection technology for energy-efficient optoelectronic devices. |
| title | Fabrication of self-powered photodetector materials based on Ni-doped ZnO/p-Si heterojunctions |
| topic | Materials Science Applied Physics Chemical Physics |
| url | https://arxiv.org/abs/2502.05441 |