Performance Characteristics of the Battery-Operated Si PIN Diode Detector with Integrated Preamplifier and Data Acquisition Module for Fusion Particle Detection
Fuente:
arXiv
Gespeichert in:
| Hauptverfasser: | , , , , , , , , , , , , , , , , |
|---|---|
| Format: | Preprint |
| Veröffentlicht: |
2025
|
| Schlagworte: | |
| Online-Zugang: | |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| _version_ | 1866909501676847104 |
|---|---|
| author | Chen, Allan X. Sigal, Benjamin F. Wang, Qiong Martinis, John Mitchell, Naomi Wang, Yuxing Wong, Alfred Y. Li, Zhifei Gunn, Alexander Salazar, Matthew Abdalla, Nawar Wrixon, Benjamin Chen, Chia-Yi Liu, Nai-Wei Xiao, KaiJian Xie, Chih-Jui Jheng, Ming-Cheng |
| author_facet | Chen, Allan X. Sigal, Benjamin F. Wang, Qiong Martinis, John Mitchell, Naomi Wang, Yuxing Wong, Alfred Y. Li, Zhifei Gunn, Alexander Salazar, Matthew Abdalla, Nawar Wrixon, Benjamin Chen, Chia-Yi Liu, Nai-Wei Xiao, KaiJian Xie, Chih-Jui Jheng, Ming-Cheng |
| contents | We present the performance and application of a commercial off-the shelf Si PIN diode (Hamamatsu S14605) as a charged particle detector in a compact ion beam system (IBS) capable of generating D-D and p-B fusion charged particles. This detector is inexpensive, widely available, and operates in photoconductive mode under a reverse bias voltage of 12 V, supplied by an A23 battery. A charge-sensitive preamplifier (CSP) is powered by two 3 V lithium batteries (A123), providing +/-3 V rail voltages. Both the detector and preamplifier circuits are integrated onto the same 4-layer PCB and housed on the vacuum side of the IBS, facing the fusion target. The system employs a CF-2.75 flanged DB-9 connector feedthrough to supply the signal, bias voltage, and rail voltages. To mitigate the high sensitivity of the detector to optical light, a thin aluminum foil assembly is used to block optical emissions from the ion beam and target. Charged particles generate step responses on the preamplifier output, with pulse rise times on the order of 0.2 to 0.3 us. These signals are recorded using a custom-built data acquisition unit, which features an optical fiber data link to ensure electrical isolation of the detector electronics. Subsequent digital signal processing is employed to optimally shape the pulses using a CR-RC^4 filter to produce Gaussian-shaped signals, enabling accurate extraction of energy information. Performance results show that the signal-to-noise ratios (S/N) for D-D fusion charged particles - protons, tritons, and helions - are approximately 30, 10, and 5, respectively, with a shaping time constant of 4 us. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2502_10823 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | Performance Characteristics of the Battery-Operated Si PIN Diode Detector with Integrated Preamplifier and Data Acquisition Module for Fusion Particle Detection Chen, Allan X. Sigal, Benjamin F. Wang, Qiong Martinis, John Mitchell, Naomi Wang, Yuxing Wong, Alfred Y. Li, Zhifei Gunn, Alexander Salazar, Matthew Abdalla, Nawar Wrixon, Benjamin Chen, Chia-Yi Liu, Nai-Wei Xiao, KaiJian Xie, Chih-Jui Jheng, Ming-Cheng Instrumentation and Detectors High Energy Physics - Experiment Nuclear Experiment We present the performance and application of a commercial off-the shelf Si PIN diode (Hamamatsu S14605) as a charged particle detector in a compact ion beam system (IBS) capable of generating D-D and p-B fusion charged particles. This detector is inexpensive, widely available, and operates in photoconductive mode under a reverse bias voltage of 12 V, supplied by an A23 battery. A charge-sensitive preamplifier (CSP) is powered by two 3 V lithium batteries (A123), providing +/-3 V rail voltages. Both the detector and preamplifier circuits are integrated onto the same 4-layer PCB and housed on the vacuum side of the IBS, facing the fusion target. The system employs a CF-2.75 flanged DB-9 connector feedthrough to supply the signal, bias voltage, and rail voltages. To mitigate the high sensitivity of the detector to optical light, a thin aluminum foil assembly is used to block optical emissions from the ion beam and target. Charged particles generate step responses on the preamplifier output, with pulse rise times on the order of 0.2 to 0.3 us. These signals are recorded using a custom-built data acquisition unit, which features an optical fiber data link to ensure electrical isolation of the detector electronics. Subsequent digital signal processing is employed to optimally shape the pulses using a CR-RC^4 filter to produce Gaussian-shaped signals, enabling accurate extraction of energy information. Performance results show that the signal-to-noise ratios (S/N) for D-D fusion charged particles - protons, tritons, and helions - are approximately 30, 10, and 5, respectively, with a shaping time constant of 4 us. |
| title | Performance Characteristics of the Battery-Operated Si PIN Diode Detector with Integrated Preamplifier and Data Acquisition Module for Fusion Particle Detection |
| topic | Instrumentation and Detectors High Energy Physics - Experiment Nuclear Experiment |
| url | https://arxiv.org/abs/2502.10823 |