Influence of Chemistry and Topography on the Wettability of Copper
Fuente:
arXiv
Guardado en:
| Autores principales: | , , , , , , , |
|---|---|
| Formato: | Preprint |
| Publicado: |
2025
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1866908981337784320 |
|---|---|
| author | Lößlein, Sarah Marie Merz, Rolf Rodríguez-Martínez, Yerila Schäfer, Florian Grützmacher, Philipp Horwat, David Kopnarski, Michael Mücklich, Frank |
| author_facet | Lößlein, Sarah Marie Merz, Rolf Rodríguez-Martínez, Yerila Schäfer, Florian Grützmacher, Philipp Horwat, David Kopnarski, Michael Mücklich, Frank |
| contents | To understand the complex interplay of topography and surface chemistry in wetting, fundamental studies investigating both parameters are needed. Due to the sensitivity of wetting to miniscule changes in one of the parameters it is imperative to precisely control the experimental approach. A profound understanding of their influence on wetting facilitates a tailored design of surfaces with unique functionality. We present a multi-step study: The influence of surface chemistry is analyzed by determining the adsorption of volatile carbonous species (A) and by sputter deposition of metallic copper and copper oxides on flat copper substrates (B). A precise surface topography is created by laser processing. Isotropic topography is created by ps laser processing (C), and hierarchical anisotropic line patterns are produced by direct laser interference patterning (DLIP) with different pulse durations (D). Our results reveal that the long-term wetting response of polished copper surfaces stabilizes with time despite ongoing accumulation of hydrocarbons and is dominated by this adsorption layer over the oxide state of the substrate (Cu, CuO, Cu2O). The surfaces' wetting response can be precisely tuned by tailoring the topography via laser processing. The sub-pattern morphology of primary line-like patterns showed great impact on the static contact angle, wetting anisotropy, and water adhesion. An increased roughness inside the pattern valleys combined with a minor roughness on the peaks favors air-inclusions, isotropic hydrophobicity, and low water adhesion. Increasing the aspect ratio showed to enhance air-inclusions and hydrophobicity despite increased peak roughness while time dependent wetting transitions were observed. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2502_18938 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | Influence of Chemistry and Topography on the Wettability of Copper Lößlein, Sarah Marie Merz, Rolf Rodríguez-Martínez, Yerila Schäfer, Florian Grützmacher, Philipp Horwat, David Kopnarski, Michael Mücklich, Frank Materials Science Chemical Physics To understand the complex interplay of topography and surface chemistry in wetting, fundamental studies investigating both parameters are needed. Due to the sensitivity of wetting to miniscule changes in one of the parameters it is imperative to precisely control the experimental approach. A profound understanding of their influence on wetting facilitates a tailored design of surfaces with unique functionality. We present a multi-step study: The influence of surface chemistry is analyzed by determining the adsorption of volatile carbonous species (A) and by sputter deposition of metallic copper and copper oxides on flat copper substrates (B). A precise surface topography is created by laser processing. Isotropic topography is created by ps laser processing (C), and hierarchical anisotropic line patterns are produced by direct laser interference patterning (DLIP) with different pulse durations (D). Our results reveal that the long-term wetting response of polished copper surfaces stabilizes with time despite ongoing accumulation of hydrocarbons and is dominated by this adsorption layer over the oxide state of the substrate (Cu, CuO, Cu2O). The surfaces' wetting response can be precisely tuned by tailoring the topography via laser processing. The sub-pattern morphology of primary line-like patterns showed great impact on the static contact angle, wetting anisotropy, and water adhesion. An increased roughness inside the pattern valleys combined with a minor roughness on the peaks favors air-inclusions, isotropic hydrophobicity, and low water adhesion. Increasing the aspect ratio showed to enhance air-inclusions and hydrophobicity despite increased peak roughness while time dependent wetting transitions were observed. |
| title | Influence of Chemistry and Topography on the Wettability of Copper |
| topic | Materials Science Chemical Physics |
| url | https://arxiv.org/abs/2502.18938 |