Flow of a two-dimensional liquid foam: Impact of surfactant type and boundary conditions
Fuente:
arXiv
Guardado en:
| Autores principales: | , , |
|---|---|
| Formato: | Preprint |
| Publicado: |
2025
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1866910894796046336 |
|---|---|
| author | Nazari, Farshad Potanin, Andrei Mohammadigoushki, Hadi |
| author_facet | Nazari, Farshad Potanin, Andrei Mohammadigoushki, Hadi |
| contents | In this study, we experimentally investigate the rheological and flow behavior of two-dimensional (2D) monodisperse aqueous foams, sheared between parallel plates using a custom-made rheo-optical apparatus with smooth and roughened walls. The foams were prepared using two commercially available detergents, Foam 1 and Foam2, while maintaining similar bubble sizes and liquid fractions. The linear viscoelastic results reveal that the Foam 1 consistently exhibits higher elastic and loss moduli than the Foam 2, regardless of boundary conditions, with roughened walls further enhancing these moduli in both foams. Additionally, the Foam 1 shows a lower viscoelastic relaxation frequency compared to the Foam 2, indicating a less mobile interface for the Foam 1. In the non-linear regime, significant differences were observed. Under smooth boundary conditions, Foam 2 exhibits yield stress behavior, whereas Foam 1 does not, despite having higher viscous stresses. The viscous stress in the Foam 1 scales with the capillary number, while for the Foam 2, the scaling depends on the boundary conditions differently for smooth walls and for roughened walls. These variations in rheological behavior are attributed to differences in surfactant chemistry, leading to different interface mobilities, with the Foam1 having a less mobile interface compared to the Foam 2. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2503_20710 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | Flow of a two-dimensional liquid foam: Impact of surfactant type and boundary conditions Nazari, Farshad Potanin, Andrei Mohammadigoushki, Hadi Soft Condensed Matter Fluid Dynamics In this study, we experimentally investigate the rheological and flow behavior of two-dimensional (2D) monodisperse aqueous foams, sheared between parallel plates using a custom-made rheo-optical apparatus with smooth and roughened walls. The foams were prepared using two commercially available detergents, Foam 1 and Foam2, while maintaining similar bubble sizes and liquid fractions. The linear viscoelastic results reveal that the Foam 1 consistently exhibits higher elastic and loss moduli than the Foam 2, regardless of boundary conditions, with roughened walls further enhancing these moduli in both foams. Additionally, the Foam 1 shows a lower viscoelastic relaxation frequency compared to the Foam 2, indicating a less mobile interface for the Foam 1. In the non-linear regime, significant differences were observed. Under smooth boundary conditions, Foam 2 exhibits yield stress behavior, whereas Foam 1 does not, despite having higher viscous stresses. The viscous stress in the Foam 1 scales with the capillary number, while for the Foam 2, the scaling depends on the boundary conditions differently for smooth walls and for roughened walls. These variations in rheological behavior are attributed to differences in surfactant chemistry, leading to different interface mobilities, with the Foam1 having a less mobile interface compared to the Foam 2. |
| title | Flow of a two-dimensional liquid foam: Impact of surfactant type and boundary conditions |
| topic | Soft Condensed Matter Fluid Dynamics |
| url | https://arxiv.org/abs/2503.20710 |