Local Thermal Non-Equilibrium Models in Porous Media: A Comparative Study of Conduction Effects

Fuente: arXiv
Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Kostelecky, Anna Mareike, Stefansson, Ivar, Bringedal, Carina, Ghosh, Tufan, Dahle, Helge K., Helmig, Rainer
Format: Preprint
Veröffentlicht: 2025
Schlagworte:
Online-Zugang:
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
_version_ 1866908994570813440
author Kostelecky, Anna Mareike
Stefansson, Ivar
Bringedal, Carina
Ghosh, Tufan
Dahle, Helge K.
Helmig, Rainer
author_facet Kostelecky, Anna Mareike
Stefansson, Ivar
Bringedal, Carina
Ghosh, Tufan
Dahle, Helge K.
Helmig, Rainer
contents Instantaneous heat transfer between different phases is a common assumption for modeling heat transfer in porous media, known as Local Thermal Equilibrium (LTE). This assumption may not hold in certain technical and environmental applications, especially in systems with large temperature gradients, large differences in thermal properties, or high velocities. Local Thermal Non-Equilibrium (LTNE) models aim to describe heat transfer processes when the LTE assumption may fail. In this work, we compare three continuum-scale models from the pore to the representative elementary volume (REV) scale. Specifically, dual-network and REV-scale models are evaluated against a pore-resolved model, which we perceive as a reference in the absence of experimental results. Different effective models are used to obtain upscaled properties on the REV scale and to compare resulting temperature profiles. The systems investigated are fully saturated, consisting of one fluid and one solid phase. This study focuses on purely conductive systems without significant differences in thermal properties. Results show that LTE holds then for low interfacial resistances. However, for large interfacial resistances, solid and fluid temperatures differ. The REV-scale model with effective parameters obtained by homogenization leads to similar results as the pore-resolved model, whereas the dual-network model shows greater deviation due to its fixed spatial resolution. Among the evaluated effective parameter formulations for the REV-scale model, only the homogenization-based approach captures the LTNE behavior, as it incorporates the interfacial heat transfer coefficient. Convection is relevant for most practical applications, and its impact will be addressed in a follow-up article.
format Preprint
id arxiv_https___arxiv_org_abs_2504_05920
institution arXiv
publishDate 2025
record_format arxiv
spellingShingle Local Thermal Non-Equilibrium Models in Porous Media: A Comparative Study of Conduction Effects
Kostelecky, Anna Mareike
Stefansson, Ivar
Bringedal, Carina
Ghosh, Tufan
Dahle, Helge K.
Helmig, Rainer
Fluid Dynamics
Instantaneous heat transfer between different phases is a common assumption for modeling heat transfer in porous media, known as Local Thermal Equilibrium (LTE). This assumption may not hold in certain technical and environmental applications, especially in systems with large temperature gradients, large differences in thermal properties, or high velocities. Local Thermal Non-Equilibrium (LTNE) models aim to describe heat transfer processes when the LTE assumption may fail. In this work, we compare three continuum-scale models from the pore to the representative elementary volume (REV) scale. Specifically, dual-network and REV-scale models are evaluated against a pore-resolved model, which we perceive as a reference in the absence of experimental results. Different effective models are used to obtain upscaled properties on the REV scale and to compare resulting temperature profiles. The systems investigated are fully saturated, consisting of one fluid and one solid phase. This study focuses on purely conductive systems without significant differences in thermal properties. Results show that LTE holds then for low interfacial resistances. However, for large interfacial resistances, solid and fluid temperatures differ. The REV-scale model with effective parameters obtained by homogenization leads to similar results as the pore-resolved model, whereas the dual-network model shows greater deviation due to its fixed spatial resolution. Among the evaluated effective parameter formulations for the REV-scale model, only the homogenization-based approach captures the LTNE behavior, as it incorporates the interfacial heat transfer coefficient. Convection is relevant for most practical applications, and its impact will be addressed in a follow-up article.
title Local Thermal Non-Equilibrium Models in Porous Media: A Comparative Study of Conduction Effects
topic Fluid Dynamics
url https://arxiv.org/abs/2504.05920