FlexPINN: Modeling Fluid Dynamics and Mass Transfer in 3D Micromixer Geometries Using a Flexible Physics-Informed Neural Network
Fuente:
arXiv
Guardado en:
| Autores principales: | , , |
|---|---|
| Formato: | Preprint |
| Publicado: |
2025
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1866912916755709952 |
|---|---|
| author | Hassanzadeh, Meraj Ghaderi, Ehsan Bijarchi, Mohamad Ali |
| author_facet | Hassanzadeh, Meraj Ghaderi, Ehsan Bijarchi, Mohamad Ali |
| contents | In this study, fluid flow and concentration distribution inside a 3D T-shaped micromixer with various fin shapes and configurations are investigated using a Flexible Physics-Informed Neural Network (FlexPINN), which includes modifications over the vanilla PINN architecture. Three types of fins (rectangular, elliptical, and triangular) are considered to evaluate the influence of fin geometry, along with four different fin configurations inside the 3D channel to examine the effect of placement. The simulations are conducted at four Reynolds numbers: 5, 20, 40, and 80, in both single-unit (four fins) and double-unit (eight fins) configurations. The goal is to assess pressure drop coefficient, mixing index, and mixing efficiency using the FlexPINN method. Given the challenges in simulating 3D problems with standard PINN, several improvements are introduced. The governing equations are injected into the network as first-order, dimensionless derivatives to enhance accuracy. Transfer learning is used to reduce computational cost, and adaptive loss weighting is applied to improve convergence compared to the vanilla PINN approach. These modifications enable a consistent and flexible architecture that can be used across numerous tested cases. Using the proposed FlexPINN method, the pressure drop coefficient and mixing index are predicted with maximum errors of 3.25% and 2.86%, respectively, compared to Computational Fluid Dynamics (CFD) results. Among all the tested cases, the rectangular fin with configuration C in the double-unit setup at Reynolds number 40 shows the highest mixing efficiency, reaching a value of 1.63. The FlexPINN framework demonstrates strong capabilities in simulating fluid flow and species transport in complex 3D geometries. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2504_17896 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | FlexPINN: Modeling Fluid Dynamics and Mass Transfer in 3D Micromixer Geometries Using a Flexible Physics-Informed Neural Network Hassanzadeh, Meraj Ghaderi, Ehsan Bijarchi, Mohamad Ali Fluid Dynamics Computational Physics In this study, fluid flow and concentration distribution inside a 3D T-shaped micromixer with various fin shapes and configurations are investigated using a Flexible Physics-Informed Neural Network (FlexPINN), which includes modifications over the vanilla PINN architecture. Three types of fins (rectangular, elliptical, and triangular) are considered to evaluate the influence of fin geometry, along with four different fin configurations inside the 3D channel to examine the effect of placement. The simulations are conducted at four Reynolds numbers: 5, 20, 40, and 80, in both single-unit (four fins) and double-unit (eight fins) configurations. The goal is to assess pressure drop coefficient, mixing index, and mixing efficiency using the FlexPINN method. Given the challenges in simulating 3D problems with standard PINN, several improvements are introduced. The governing equations are injected into the network as first-order, dimensionless derivatives to enhance accuracy. Transfer learning is used to reduce computational cost, and adaptive loss weighting is applied to improve convergence compared to the vanilla PINN approach. These modifications enable a consistent and flexible architecture that can be used across numerous tested cases. Using the proposed FlexPINN method, the pressure drop coefficient and mixing index are predicted with maximum errors of 3.25% and 2.86%, respectively, compared to Computational Fluid Dynamics (CFD) results. Among all the tested cases, the rectangular fin with configuration C in the double-unit setup at Reynolds number 40 shows the highest mixing efficiency, reaching a value of 1.63. The FlexPINN framework demonstrates strong capabilities in simulating fluid flow and species transport in complex 3D geometries. |
| title | FlexPINN: Modeling Fluid Dynamics and Mass Transfer in 3D Micromixer Geometries Using a Flexible Physics-Informed Neural Network |
| topic | Fluid Dynamics Computational Physics |
| url | https://arxiv.org/abs/2504.17896 |