Laser injection locking and nanophotonic spectral translation of electro-optic frequency combs

Fuente: arXiv
Enregistré dans:
Détails bibliographiques
Auteurs principaux: Zektzer, Roy, Chanana, Ashish, Lu, Xiyuan, Long, David A., Srinivasan, Kartik
Format: Preprint
Publié: 2025
Sujets:
Accès en ligne:
Tags: Ajouter un tag
Pas de tags, Soyez le premier à ajouter un tag!
_version_ 1866911533067403264
author Zektzer, Roy
Chanana, Ashish
Lu, Xiyuan
Long, David A.
Srinivasan, Kartik
author_facet Zektzer, Roy
Chanana, Ashish
Lu, Xiyuan
Long, David A.
Srinivasan, Kartik
contents High-resolution electro-optic frequency combs (EO combs) consisting of thousands to millions of comb teeth across a bandwidth between 1 GHz to 500 GHz are powerful tools for atomic, molecular, and cavity-based spectroscopy, including in the context of deployable quantum sensors. However, achieving sufficiently high signal-to-noise ratio (SNR) EO combs for use across the broad range of wavelengths required in the aforementioned applications is hindered by the corresponding unavailability of relevant components such as narrow-linewidth lasers, electro-optic phase modulators with adequate optical power handling, and low-noise optical amplifiers. Here, we address the latter two points by showing that optical injection locking of commercial Fabry-Perot (FP) laser diodes can help enable high SNR EO combs. We injection lock the FP laser diode to more than 10^6 comb teeth at injected comb powers as low as 1 nW and produce a high SNR replica of the EO comb. In comparison to a commercial semiconductor optical amplifier, injection locking achieves approximately 100x greater SNR for the same input power (when <1 microwatt) and equal SNR for > 35x lower input power. Such low-power injection locking is of particular relevance in conjunction with nanophotonic spectral translation, which extends the range of wavelengths available for EO combs. We show that the usable wavelength range of an EO comb produced by photo-induced second harmonic generation of an EO comb in a silicon nitride resonator is significantly increased when combined with optical injection locking. Our results demonstrate that optical injection locking provides a versatile and high-performance approach to addressing many different scenarios in which EO comb SNR would be otherwise limited.
format Preprint
id arxiv_https___arxiv_org_abs_2504_21746
institution arXiv
publishDate 2025
record_format arxiv
spellingShingle Laser injection locking and nanophotonic spectral translation of electro-optic frequency combs
Zektzer, Roy
Chanana, Ashish
Lu, Xiyuan
Long, David A.
Srinivasan, Kartik
Optics
High-resolution electro-optic frequency combs (EO combs) consisting of thousands to millions of comb teeth across a bandwidth between 1 GHz to 500 GHz are powerful tools for atomic, molecular, and cavity-based spectroscopy, including in the context of deployable quantum sensors. However, achieving sufficiently high signal-to-noise ratio (SNR) EO combs for use across the broad range of wavelengths required in the aforementioned applications is hindered by the corresponding unavailability of relevant components such as narrow-linewidth lasers, electro-optic phase modulators with adequate optical power handling, and low-noise optical amplifiers. Here, we address the latter two points by showing that optical injection locking of commercial Fabry-Perot (FP) laser diodes can help enable high SNR EO combs. We injection lock the FP laser diode to more than 10^6 comb teeth at injected comb powers as low as 1 nW and produce a high SNR replica of the EO comb. In comparison to a commercial semiconductor optical amplifier, injection locking achieves approximately 100x greater SNR for the same input power (when <1 microwatt) and equal SNR for > 35x lower input power. Such low-power injection locking is of particular relevance in conjunction with nanophotonic spectral translation, which extends the range of wavelengths available for EO combs. We show that the usable wavelength range of an EO comb produced by photo-induced second harmonic generation of an EO comb in a silicon nitride resonator is significantly increased when combined with optical injection locking. Our results demonstrate that optical injection locking provides a versatile and high-performance approach to addressing many different scenarios in which EO comb SNR would be otherwise limited.
title Laser injection locking and nanophotonic spectral translation of electro-optic frequency combs
topic Optics
url https://arxiv.org/abs/2504.21746