Non-destructive sub-surface inspection of multi-layer wind turbine blade coatings by mid-infrared Optical Coherence Tomography
Fuente:
arXiv
Enregistré dans:
| Auteurs principaux: | , , , , , , , |
|---|---|
| Format: | Preprint |
| Publié: |
2025
|
| Sujets: | |
| Accès en ligne: | |
| Tags: |
Ajouter un tag
Pas de tags, Soyez le premier à ajouter un tag!
|
| _version_ | 1866915555956490240 |
|---|---|
| author | Lapre, Coraline Petersen, Christian Rosenberg Nielsen, Per Wulf, Thomas Bech, Jakob Iltsed Fæster, Søren Bang, Ole Israelsen, Niels Møller |
| author_facet | Lapre, Coraline Petersen, Christian Rosenberg Nielsen, Per Wulf, Thomas Bech, Jakob Iltsed Fæster, Søren Bang, Ole Israelsen, Niels Møller |
| contents | Non-destructive inspection (NDI) is useful in the industrial sector to ensure that manufacturing follows defined specifications, reducing the quantity of waste and thereby the cost of production. In response to climate change and the need to reduce carbon footprints, there is a growing demand for NDI solutions that are primarily non-contact, as well as non-destructive, fast, and easily integrated. Optical Coherence Tomography (OCT), a well-known diagnostic technique in medical and biological research, is increasingly being used for industrial NDI. In the mid-infrared (MIR) wavelength range, OCT can be used to characterise parts and defects not possible by other industry-ready scanners, and enables better penetration than conventional near-infrared OCT.
In this article, we demonstrate NDI of wind turbine blade (WTB) coatings using an MIR OCT scanner employing light around 4 $μ$m from a supercontinuum source. We inspected the top two layers of the coating (topcoat and primer) in two different samples. The first is to determine the maximum penetration depth, and the second one is to emulate defect identification. The results of our study confirm that MIR OCT scanners are highly suitable for coating inspection and quality control in the production of WTBs, with performance parameters not achievable by other technologies. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2505_05191 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | Non-destructive sub-surface inspection of multi-layer wind turbine blade coatings by mid-infrared Optical Coherence Tomography Lapre, Coraline Petersen, Christian Rosenberg Nielsen, Per Wulf, Thomas Bech, Jakob Iltsed Fæster, Søren Bang, Ole Israelsen, Niels Møller Optics Non-destructive inspection (NDI) is useful in the industrial sector to ensure that manufacturing follows defined specifications, reducing the quantity of waste and thereby the cost of production. In response to climate change and the need to reduce carbon footprints, there is a growing demand for NDI solutions that are primarily non-contact, as well as non-destructive, fast, and easily integrated. Optical Coherence Tomography (OCT), a well-known diagnostic technique in medical and biological research, is increasingly being used for industrial NDI. In the mid-infrared (MIR) wavelength range, OCT can be used to characterise parts and defects not possible by other industry-ready scanners, and enables better penetration than conventional near-infrared OCT. In this article, we demonstrate NDI of wind turbine blade (WTB) coatings using an MIR OCT scanner employing light around 4 $μ$m from a supercontinuum source. We inspected the top two layers of the coating (topcoat and primer) in two different samples. The first is to determine the maximum penetration depth, and the second one is to emulate defect identification. The results of our study confirm that MIR OCT scanners are highly suitable for coating inspection and quality control in the production of WTBs, with performance parameters not achievable by other technologies. |
| title | Non-destructive sub-surface inspection of multi-layer wind turbine blade coatings by mid-infrared Optical Coherence Tomography |
| topic | Optics |
| url | https://arxiv.org/abs/2505.05191 |