In-situ control of the resonant frequency of kinetic inductance detectors with multiplexed readout
Fuente:
arXiv
Saved in:
| Main Authors: | , , , , , , , |
|---|---|
| Format: | Preprint |
| Published: |
2025
|
| Subjects: | |
| Online Access: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866915317891989504 |
|---|---|
| author | Rouble, Maclean Adamič, Michel Barry, Peter S. Dibert, Karia R. Dobbs, Matt Fichman, Kyra Montgomery, Joshua Smecher, Graeme |
| author_facet | Rouble, Maclean Adamič, Michel Barry, Peter S. Dibert, Karia R. Dobbs, Matt Fichman, Kyra Montgomery, Joshua Smecher, Graeme |
| contents | Large multiplexing factors are a primary advantage of kinetic inductance detectors (KIDs), but the implementation of high density arrays still presents significant challenges. Deviations between designed and achieved resonant frequencies are common, and differential loading and responsivity variation across an array may lead to dynamic inter-resonator interactions. It is therefore valuable to be able to both set and maintain the resonant frequency of a KID in situ, using the readout system. We show that it is possible to alter the resonant frequency of the devices by multiple linewidths through the application of readout current, and establish a new stable operational bias point at the driven frequency by making use of the hysteretic bistability commonly seen as bifurcation in frequency-domain measurements. We examine this interaction using a readout tone at fixed frequency positioned near or within the unbiased resonant bandwidth. Development of a control methodology based on this principle remains in an early stage, but a foundational step is understanding the interaction of the readout current with the resonator, in particular its influence on the resonant frequency. In this work, we study conventional KIDs with no physical isolation from the substrate, so we posit that the readout current primarily interacts with the resonator via non-thermal mechanisms, resulting in a predominantly reactive response. This behaviour is reproduced by a simple lumped-element circuit model of the resonance and readout system, providing a straightforward framework for analysis and interpretation. This demonstration is an important early step in the development of techniques which seek to dynamically alter the resonant frequencies of conventional KID arrays, and sets the stage for fast active resonant frequency control under operational conditions. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2506_01149 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | In-situ control of the resonant frequency of kinetic inductance detectors with multiplexed readout Rouble, Maclean Adamič, Michel Barry, Peter S. Dibert, Karia R. Dobbs, Matt Fichman, Kyra Montgomery, Joshua Smecher, Graeme Instrumentation and Detectors Instrumentation and Methods for Astrophysics Large multiplexing factors are a primary advantage of kinetic inductance detectors (KIDs), but the implementation of high density arrays still presents significant challenges. Deviations between designed and achieved resonant frequencies are common, and differential loading and responsivity variation across an array may lead to dynamic inter-resonator interactions. It is therefore valuable to be able to both set and maintain the resonant frequency of a KID in situ, using the readout system. We show that it is possible to alter the resonant frequency of the devices by multiple linewidths through the application of readout current, and establish a new stable operational bias point at the driven frequency by making use of the hysteretic bistability commonly seen as bifurcation in frequency-domain measurements. We examine this interaction using a readout tone at fixed frequency positioned near or within the unbiased resonant bandwidth. Development of a control methodology based on this principle remains in an early stage, but a foundational step is understanding the interaction of the readout current with the resonator, in particular its influence on the resonant frequency. In this work, we study conventional KIDs with no physical isolation from the substrate, so we posit that the readout current primarily interacts with the resonator via non-thermal mechanisms, resulting in a predominantly reactive response. This behaviour is reproduced by a simple lumped-element circuit model of the resonance and readout system, providing a straightforward framework for analysis and interpretation. This demonstration is an important early step in the development of techniques which seek to dynamically alter the resonant frequencies of conventional KID arrays, and sets the stage for fast active resonant frequency control under operational conditions. |
| title | In-situ control of the resonant frequency of kinetic inductance detectors with multiplexed readout |
| topic | Instrumentation and Detectors Instrumentation and Methods for Astrophysics |
| url | https://arxiv.org/abs/2506.01149 |