Image de couverture de livre

Design Didn't Prevent These Hazard Exposures

Fuente: arXiv

Enregistré dans:

Détails bibliographiques
Auteur principal:	Mertz, David. E
Format:	Preprint
Publié:	2025
Sujets:	Instrumentation and Detectors
Accès en ligne:	Acceder al recurso
Tags:	Ajouter un tag Pas de tags, Soyez le premier à ajouter un tag!

Documents similaires

Valley-Peak Modulation in Phase Space: an Exposure-Invariant VPM and its Theta-Function Structure
par: Hendrickson, Aaron J., et autres
Publié: (2026)

Exposure of Track Detectors in Xenon Ion Beams in NICA Accelerator Complex
par: Zaitsev, A. A., et autres
Publié: (2024)

MKS 390 Micro-Ion Gauge Performance After Exposure to High Pressures
par: Massett, Brandon, et autres
Publié: (2025)

Design of a Miniature Kibble Balance for Kilogram-Scale Mass Calibration -- KBmini
par: Li, Shisong, et autres
Publié: (2026)

Design and implementation of the constant fraction discriminator for glass MRPC timing
par: Kurchaninov, L. L., et autres
Publié: (2025)

Integrating lpGBT links into the Common Readout Units (CRU) of the ALICE Experiment
par: David, E., et autres
Publié: (2024)

HighNESS Conceptual Design Report: Volume I
par: Santoro, V., et autres
Publié: (2023)

The Impact of Helium Exposure on the PMTs of the SuperNEMO Experiment
par: SuperNEMO Collaboration, et autres
Publié: (2025)

Exploring the Design and Measurements of Next-Generation 4H-SiC LGADs
par: Švihra, Peter, et autres
Publié: (2025)

Design, characterization and installation of the NEXT-100 cathode and electroluminescence regions
par: NEXT Collaboration, et autres
Publié: (2023)

Design and Performance of a 96-channel Resistive PICOSEC Micromegas Detector for ENUBET
par: Kallitsopoulou, A., et autres
Publié: (2025)

Incident Beamline Design for a Modern Cold Triple Axis Spectrometer at the High Flux Isotope Reactor
par: Granroth, G. E., et autres
Publié: (2024)

Design, Fabrication and Characterization of Microwave Multiplexing SQUID Prototype
par: Song, Mengjie, et autres
Publié: (2026)

Design and simulation of the High-Energy Proton Beam Telescope
par: Li, Lan-Kun, et autres
Publié: (2026)

A Design of Hadronic Calorimeter for DarkSHINE Experiment
par: Wang, Zhen, et autres
Publié: (2023)

Design and characterisation of an antiproton deceleration beamline for the PUMA experiment
par: Fischer, J., et autres
Publié: (2024)

Designing Gram-Scale Resonators for Precision Inertial Sensors
par: Carter, Jonathan J., et autres
Publié: (2023)

Design, construction, and testing of the PandaX-xT cryogenics system
par: Wang, Xu, et autres
Publié: (2025)

Design and characterization of a fast output amplifier for Silicon Photomultipliers
par: Soriano, Felipe, et autres
Publié: (2025)

Design, simulation and performance of the resistive-anode PICOSEC Micromegas detector
par: Janssens, Djunes, et autres
Publié: (2025)

Preliminary Design of a General Electronics Platform for Accelerator Facilities
par: Zhu, Jinfu, et autres
Publié: (2024)

Real-Time Readout System Design for the BULLKID-DM Experiment: Enhancing Dark Matter Search Capabilities
par: Muscheid, T., et autres
Publié: (2025)

Design and optimisation of radiation resistant AC- and DC-coupled resistive LGADs
par: Fondacci, Alessandro, et autres
Publié: (2025)

The Design of a High Speed Low Power Phase Locked Loop
par: Liu, Tiankuan, et autres
Publié: (2024)

Mixing plant for JUNO liquid scintillator: Design, construction, installation and commissioning
par: Shao, Junyu, et autres
Publié: (2026)

Design and Initial Test of the Weighing Unit for Tsinghua Tabletop Kibble Balance
par: Liu, Weibo, et autres
Publié: (2026)

Design and Performance of a Monolithic Plastic Scintillator Tracker with Embedded Scatterers
par: Otani, Naoki, et autres
Publié: (2026)

Optimising Re-entrant Cavity Designs for Low Mass Axion Haloscopes
par: Singh, Raj Aryan, et autres
Publié: (2026)

Design of a compact, radiation tolerant AlGaAs Geiger photodiode
par: Downing, Matthew, et autres
Publié: (2024)

Design of a large-scale superconducting dipole magnet for the CEE spectrometer
par: Chen, Yuquan, et autres
Publié: (2024)

Design and Characterization of an Optically-Segmented Single Volume Scatter Camera Module
par: Keefe, Kevin, et autres
Publié: (2021)

Design and Fabrication Of Multiplexed One-Port SAW Resonators On A Single Chip
par: Westrelin, Alexandre, et autres
Publié: (2025)

Design and Implementation of a UDP-Based Command Interface for the INO ICAL Experiment
par: Elangovan, Yuvaraj, et autres
Publié: (2025)

Design and Verification of a New Current Source for Tsinghua Tabletop Kibble Balance
par: Ma, Yuhan, et autres
Publié: (2026)

Design and test for the CEPC muon subdetector based on extruded scintillator and SiPM
par: Zhang, Hongyu, et autres
Publié: (2023)

Design and Performance of HV CMOS Sensors for Future Colliders by the RD50 Collaboration
par: Sonneveld, Jory
Publié: (2023)

Preliminary Design and Performance Simulation of a Thermal Neutron Diffractometer Using McStas
par: Chen, Li-Fang
Publié: (2025)

Open-Source CubeSat Solar Panels: Design, Assembly, Testing, and On-Orbit Demonstration
par: Sorensen, Nicholas J., et autres
Publié: (2024)

Design and Performance of a Magnetic Bottle Electron Spectrometer for High-Energy Photoelectron Spectroscopy
par: Borne, Kurtis, et autres
Publié: (2024)

Design, development and commissioning of a new towing tank at the University of Southampton: A decade of endeavour
par: Malas, B
Publié: (2025)