Extrinsic Dopants as Growth Modifiers in Cu-Cr-O delafossites: A Study of Incorporation Limits and Film Properties
Fuente:
arXiv
Saved in:
| Main Authors: | , , , , , |
|---|---|
| Format: | Preprint |
| Published: |
2025
|
| Subjects: | |
| Online Access: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866911007503286272 |
|---|---|
| author | Moreira, Marco Fleming, Yves Grysan, Patrick Vergne, Christele Philippe, Adrian Marie Lunca-Popa, Petru |
| author_facet | Moreira, Marco Fleming, Yves Grysan, Patrick Vergne, Christele Philippe, Adrian Marie Lunca-Popa, Petru |
| contents | Cu-Cr-O delafossite thin films were grown by metal-organic chemical vapor deposition with various extrinsic dopants (Al, Mg, Mn, Sc, Y, and Zn) targeted at 5 at % to investigate how such doping influences their structure and properties. X-ray photoelectron spectroscopy revealed that the actual dopant incorporation is well below the nominal 5 %, with only Al and Sc present above detection. An off-stoichiometric Cu-Cr-O composition is determined, with no secondary phases detected. Transmission electron microscopy indicates that films grown on c-plane sapphire are epitaxial near the substrate interface but relax into a polycrystalline structure beyond 20 nm, while films on silicon are polycrystalline throughout. All films show high p-type conductivity (on the order of 10-10^2 Scm-1) attributable to the excess oxygen, with no significant variation among different dopants. Optical transmission measurements indicate a slight red-shift (~20 nm) of the absorption edge for all doped films, likely arising from strain effects and subtle structural disorder introduced during growth. We discuss the influence of lattice strain (investigated by X-ray diffraction sin ψ squared measurements showing residual strain) and small polaron absorption behavior in these films. Despite limited incorporation of dopants, subtle structural and optical shifts suggest that dopant precursor chemistry and growth conditions play a significant role in influencing film stoichiometry and properties. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2506_13540 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | Extrinsic Dopants as Growth Modifiers in Cu-Cr-O delafossites: A Study of Incorporation Limits and Film Properties Moreira, Marco Fleming, Yves Grysan, Patrick Vergne, Christele Philippe, Adrian Marie Lunca-Popa, Petru Materials Science Cu-Cr-O delafossite thin films were grown by metal-organic chemical vapor deposition with various extrinsic dopants (Al, Mg, Mn, Sc, Y, and Zn) targeted at 5 at % to investigate how such doping influences their structure and properties. X-ray photoelectron spectroscopy revealed that the actual dopant incorporation is well below the nominal 5 %, with only Al and Sc present above detection. An off-stoichiometric Cu-Cr-O composition is determined, with no secondary phases detected. Transmission electron microscopy indicates that films grown on c-plane sapphire are epitaxial near the substrate interface but relax into a polycrystalline structure beyond 20 nm, while films on silicon are polycrystalline throughout. All films show high p-type conductivity (on the order of 10-10^2 Scm-1) attributable to the excess oxygen, with no significant variation among different dopants. Optical transmission measurements indicate a slight red-shift (~20 nm) of the absorption edge for all doped films, likely arising from strain effects and subtle structural disorder introduced during growth. We discuss the influence of lattice strain (investigated by X-ray diffraction sin ψ squared measurements showing residual strain) and small polaron absorption behavior in these films. Despite limited incorporation of dopants, subtle structural and optical shifts suggest that dopant precursor chemistry and growth conditions play a significant role in influencing film stoichiometry and properties. |
| title | Extrinsic Dopants as Growth Modifiers in Cu-Cr-O delafossites: A Study of Incorporation Limits and Film Properties |
| topic | Materials Science |
| url | https://arxiv.org/abs/2506.13540 |