Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Preprint |
| Published: |
2025
|
| Subjects: | |
| Online Access: | https://arxiv.org/abs/2508.02728 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866911091591741440 |
|---|---|
| author | Colmenero, J. Mercado LaRubia, M. Garcia, E. Mata Santiago, M. Rodriguez Donate, C. Martin |
| author_facet | Colmenero, J. Mercado LaRubia, M. Garcia, E. Mata Santiago, M. Rodriguez Donate, C. Martin |
| contents | The purpose of this study is to investigate the numerical-experimental mechanical behavior modeling of the recycled polymer, that is, recyclable polyethylene terephthalate (rPET), manufactured by a deposition FFF process under compressive stresses for new sustainable designs. In all, 42 test specimens were manufactured and analyzed according to the ASTM D695-15 standards. Eight numerical analyzes were performed on a real design manufactured with rPET using Young's compression modulus from the experimental tests. Finally, eight additional experimental tests under uniaxial compression loads were performed on the real sustainable design for validating its mechanical behavior versus computational numerical tests. As a result of the experimental tests, rPET behaves linearly until it reaches the elastic limit, along each manufacturing axis. The results of this study confirmed the design's structural safety by the load scenario and operating boundary conditions. Experimental and numerical results show a difference of 0.001-0.024 mm, allowing for the rPET to be configured as isotropic in numerical simulation software without having to modify its material modeling equations. The results obtained are of great help to industry, designers and researchers because they validate the use of recycled rPET for the ecological production of real-sustainable products using MEX technology under compressive stress and its configuration for numerical simulations. Major design companies are now using recycled plastic materials in their high-end designs. Validation results have been presented on test specimens and real items, comparing experimental material configuration values with numerical results. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2508_02728 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | Using numerical-experimental analysis to evaluate rPET mechanical behavior under compressive stresses and FFF additive manufacturing for new sustainable designs Colmenero, J. Mercado LaRubia, M. Garcia, E. Mata Santiago, M. Rodriguez Donate, C. Martin Computational Engineering, Finance, and Science The purpose of this study is to investigate the numerical-experimental mechanical behavior modeling of the recycled polymer, that is, recyclable polyethylene terephthalate (rPET), manufactured by a deposition FFF process under compressive stresses for new sustainable designs. In all, 42 test specimens were manufactured and analyzed according to the ASTM D695-15 standards. Eight numerical analyzes were performed on a real design manufactured with rPET using Young's compression modulus from the experimental tests. Finally, eight additional experimental tests under uniaxial compression loads were performed on the real sustainable design for validating its mechanical behavior versus computational numerical tests. As a result of the experimental tests, rPET behaves linearly until it reaches the elastic limit, along each manufacturing axis. The results of this study confirmed the design's structural safety by the load scenario and operating boundary conditions. Experimental and numerical results show a difference of 0.001-0.024 mm, allowing for the rPET to be configured as isotropic in numerical simulation software without having to modify its material modeling equations. The results obtained are of great help to industry, designers and researchers because they validate the use of recycled rPET for the ecological production of real-sustainable products using MEX technology under compressive stress and its configuration for numerical simulations. Major design companies are now using recycled plastic materials in their high-end designs. Validation results have been presented on test specimens and real items, comparing experimental material configuration values with numerical results. |
| title | Using numerical-experimental analysis to evaluate rPET mechanical behavior under compressive stresses and FFF additive manufacturing for new sustainable designs |
| topic | Computational Engineering, Finance, and Science |
| url | https://arxiv.org/abs/2508.02728 |