Enregistré dans:
| Auteurs principaux: | , , , |
|---|---|
| Format: | Preprint |
| Publié: |
2025
|
| Sujets: | |
| Accès en ligne: | https://arxiv.org/abs/2509.02224 |
| Tags: |
Ajouter un tag
Pas de tags, Soyez le premier à ajouter un tag!
|
Table des matières:
- This paper presents the analysis, design, fabrication, and measurement of an integrated low-noise amplifier (LNA) implemented using a 130 nm CMOS technology, operating in the 2.4 GHz band. The LNA is a crucial component in the performance of receivers, particularly in integrated receivers. The proposed LNA was designed to meet the specifications of the IEEE 802.15.4 standard. Post-layout simulation results, including pads with electrostatic discharge (ESD) protection, are as follows: gain of 10.7 dB, noise figure of 2.7 dB, third-order input intercept point (IIP3) of 0.9 dBm, input and output impedance matching better than -20 dB with respect to 50~$Ω$ terminations, with a power consumption of 505 $μ$W powered from a 1.2 V supply. The obtained results fall within the range of those recently reported for the same topology and operating frequency. The measured scattering parameters (S-parameters) are consistent with the simulation results. This work contributes to the development of a new research line in Cuba on the design of radio-frequency (RF) integrated circuits.