Uplink and Downlink Communications in Segmented Waveguide-Enabled Pinching-Antenna Systems (SWANs)

Fuente: arXiv
Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Ouyang, Chongjun, Jiang, Hao, Wang, Zhaolin, Liu, Yuanwei, Ding, Zhiguo
Format: Preprint
Veröffentlicht: 2025
Schlagworte:
Online-Zugang:
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
_version_ 1866916948779991040
author Ouyang, Chongjun
Jiang, Hao
Wang, Zhaolin
Liu, Yuanwei
Ding, Zhiguo
author_facet Ouyang, Chongjun
Jiang, Hao
Wang, Zhaolin
Liu, Yuanwei
Ding, Zhiguo
contents A segmented waveguide-enabled pinching-antenna system (SWAN) is proposed, in which a segmented waveguide composed of multiple short dielectric waveguide segments is employed to radiate or receive signals through the pinching antennas (PAs) deployed on each segment. Based on this architecture, three practical operating protocols are proposed: segment selection (SS), segment aggregation (SA), and segment multiplexing (SM). For uplink SWAN communications, where one PA is activated per segment, the segmented structure eliminates the inter-antenna radiation effect, i.e., signals captured by one PA may re-radiate through other PAs along the same waveguide. This yields a tractable and physically consistent uplink signal model for a multi-PA pinching-antenna system (PASS), which has not been established for conventional PASS using a single long waveguide. Building on this model, PA placement algorithms are proposed to maximize the uplink signal-to-noise ratio (SNR). Closed-form expressions for the received SNR under the three protocols are derived, and the corresponding scaling laws with respect to the number of segments are analyzed. It is proven that the segmented architecture reduces both the average PA-to-user distance and the PA-to-feed distance, thereby mitigating both large-scale path loss and in-waveguide propagation loss. These results are extended to downlink SWAN communications, where multiple PAs are activated per segment, and PA placement methods are proposed to maximize the downlink received SNR under the three protocols. Numerical results demonstrate that: \romannumeral1) among the three protocols, SM achieves the best performance, followed by SA and then SS; and \romannumeral2) for all protocols, the proposed SWAN achieves a higher SNR than conventional PASS with a single long waveguide in both uplink and downlink scenarios.
format Preprint
id arxiv_https___arxiv_org_abs_2509_10666
institution arXiv
publishDate 2025
record_format arxiv
spellingShingle Uplink and Downlink Communications in Segmented Waveguide-Enabled Pinching-Antenna Systems (SWANs)
Ouyang, Chongjun
Jiang, Hao
Wang, Zhaolin
Liu, Yuanwei
Ding, Zhiguo
Signal Processing
A segmented waveguide-enabled pinching-antenna system (SWAN) is proposed, in which a segmented waveguide composed of multiple short dielectric waveguide segments is employed to radiate or receive signals through the pinching antennas (PAs) deployed on each segment. Based on this architecture, three practical operating protocols are proposed: segment selection (SS), segment aggregation (SA), and segment multiplexing (SM). For uplink SWAN communications, where one PA is activated per segment, the segmented structure eliminates the inter-antenna radiation effect, i.e., signals captured by one PA may re-radiate through other PAs along the same waveguide. This yields a tractable and physically consistent uplink signal model for a multi-PA pinching-antenna system (PASS), which has not been established for conventional PASS using a single long waveguide. Building on this model, PA placement algorithms are proposed to maximize the uplink signal-to-noise ratio (SNR). Closed-form expressions for the received SNR under the three protocols are derived, and the corresponding scaling laws with respect to the number of segments are analyzed. It is proven that the segmented architecture reduces both the average PA-to-user distance and the PA-to-feed distance, thereby mitigating both large-scale path loss and in-waveguide propagation loss. These results are extended to downlink SWAN communications, where multiple PAs are activated per segment, and PA placement methods are proposed to maximize the downlink received SNR under the three protocols. Numerical results demonstrate that: \romannumeral1) among the three protocols, SM achieves the best performance, followed by SA and then SS; and \romannumeral2) for all protocols, the proposed SWAN achieves a higher SNR than conventional PASS with a single long waveguide in both uplink and downlink scenarios.
title Uplink and Downlink Communications in Segmented Waveguide-Enabled Pinching-Antenna Systems (SWANs)
topic Signal Processing
url https://arxiv.org/abs/2509.10666