CAD-Driven Co-Design for Flight-Ready Jet-Powered Humanoids
Fuente:
arXiv
Gespeichert in:
| Hauptverfasser: | , , , , , |
|---|---|
| Format: | Preprint |
| Veröffentlicht: |
2025
|
| Schlagworte: | |
| Online-Zugang: | |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| _version_ | 1866909795938729984 |
|---|---|
| author | Vanteddu, Punith Reddy Gorbani, Davide L'Erario, Giuseppe Mohamed, Hosameldin Awadalla Omer Bergonti, Fabio Pucci, Daniele |
| author_facet | Vanteddu, Punith Reddy Gorbani, Davide L'Erario, Giuseppe Mohamed, Hosameldin Awadalla Omer Bergonti, Fabio Pucci, Daniele |
| contents | This paper presents a CAD-driven co-design framework for optimizing jet-powered aerial humanoid robots to execute dynamically constrained trajectories. Starting from the iRonCub-Mk3 model, a Design of Experiments (DoE) approach is used to generate 5,000 geometrically varied and mechanically feasible designs by modifying limb dimensions, jet interface geometry (e.g., angle and offset), and overall mass distribution. Each model is constructed through CAD assemblies to ensure structural validity and compatibility with simulation tools. To reduce computational cost and enable parameter sensitivity analysis, the models are clustered using K-means, with representative centroids selected for evaluation. A minimum-jerk trajectory is used to assess flight performance, providing position and velocity references for a momentum-based linearized Model Predictive Control (MPC) strategy. A multi-objective optimization is then conducted using the NSGA-II algorithm, jointly exploring the space of design centroids and MPC gain parameters. The objectives are to minimize trajectory tracking error and mechanical energy expenditure. The framework outputs a set of flight-ready humanoid configurations with validated control parameters, offering a structured method for selecting and implementing feasible aerial humanoid designs. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2509_14935 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | CAD-Driven Co-Design for Flight-Ready Jet-Powered Humanoids Vanteddu, Punith Reddy Gorbani, Davide L'Erario, Giuseppe Mohamed, Hosameldin Awadalla Omer Bergonti, Fabio Pucci, Daniele Robotics This paper presents a CAD-driven co-design framework for optimizing jet-powered aerial humanoid robots to execute dynamically constrained trajectories. Starting from the iRonCub-Mk3 model, a Design of Experiments (DoE) approach is used to generate 5,000 geometrically varied and mechanically feasible designs by modifying limb dimensions, jet interface geometry (e.g., angle and offset), and overall mass distribution. Each model is constructed through CAD assemblies to ensure structural validity and compatibility with simulation tools. To reduce computational cost and enable parameter sensitivity analysis, the models are clustered using K-means, with representative centroids selected for evaluation. A minimum-jerk trajectory is used to assess flight performance, providing position and velocity references for a momentum-based linearized Model Predictive Control (MPC) strategy. A multi-objective optimization is then conducted using the NSGA-II algorithm, jointly exploring the space of design centroids and MPC gain parameters. The objectives are to minimize trajectory tracking error and mechanical energy expenditure. The framework outputs a set of flight-ready humanoid configurations with validated control parameters, offering a structured method for selecting and implementing feasible aerial humanoid designs. |
| title | CAD-Driven Co-Design for Flight-Ready Jet-Powered Humanoids |
| topic | Robotics |
| url | https://arxiv.org/abs/2509.14935 |