Salvato in:
| Autori principali: | , , |
|---|---|
| Natura: | Preprint |
| Pubblicazione: |
2025
|
| Soggetti: | |
| Accesso online: | https://arxiv.org/abs/2510.15285 |
| Tags: |
Aggiungi Tag
Nessun Tag, puoi essere il primo ad aggiungerne!!
|
| _version_ | 1866914098030051328 |
|---|---|
| author | Bayat, Saeid Zuo, Jerry Sun, Jing |
| author_facet | Bayat, Saeid Zuo, Jerry Sun, Jing |
| contents | Offshore renewable energy systems offer promising solutions for sustainable power generation, yet most existing platforms harvest either wind or wave energy in isolation. This study presents a hybrid floating offshore platform that integrates a wind turbine with three oscillating surge wave energy converters (WECs) into a hexagonal semi-submersible structure. In this configuration, the flaps are integrated with the platform geometry to provide both energy extraction and hydrodynamic stability. A modeling and simulation framework was developed using WEC-Sim and benchmarked against the NREL 5 MW semisubmersible reference. Metacentric height analysis confirmed hydrostatic stability across a range of prescribed flap angles. Sensitivity analysis of twelve geometric variables identified flap dimensions and tower length as dominant drivers of stability, energy capture, and tower stress. Time-domain simulations revealed dependence on wave incidence angle, with variations in flap power sharing, capture width ratio (CWR), and platform response. The feasibility of using flap sweeps to modulate pitch motion was also demonstrated. Annual energy production (AEP) estimates based on site-specific data indicate 16.86 GWh from wind and 3.65 GWh from wave energy, with WECs contributing about 18% of the total. These results highlight the potential of integrated wind-wave platforms and point toward future studies on structural modeling and advanced control. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2510_15285 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | Modeling and Dynamic Simulation of a Hybrid Wind-Wave System on a Hexagonal Semi-Submersible Platform Bayat, Saeid Zuo, Jerry Sun, Jing Systems and Control Offshore renewable energy systems offer promising solutions for sustainable power generation, yet most existing platforms harvest either wind or wave energy in isolation. This study presents a hybrid floating offshore platform that integrates a wind turbine with three oscillating surge wave energy converters (WECs) into a hexagonal semi-submersible structure. In this configuration, the flaps are integrated with the platform geometry to provide both energy extraction and hydrodynamic stability. A modeling and simulation framework was developed using WEC-Sim and benchmarked against the NREL 5 MW semisubmersible reference. Metacentric height analysis confirmed hydrostatic stability across a range of prescribed flap angles. Sensitivity analysis of twelve geometric variables identified flap dimensions and tower length as dominant drivers of stability, energy capture, and tower stress. Time-domain simulations revealed dependence on wave incidence angle, with variations in flap power sharing, capture width ratio (CWR), and platform response. The feasibility of using flap sweeps to modulate pitch motion was also demonstrated. Annual energy production (AEP) estimates based on site-specific data indicate 16.86 GWh from wind and 3.65 GWh from wave energy, with WECs contributing about 18% of the total. These results highlight the potential of integrated wind-wave platforms and point toward future studies on structural modeling and advanced control. |
| title | Modeling and Dynamic Simulation of a Hybrid Wind-Wave System on a Hexagonal Semi-Submersible Platform |
| topic | Systems and Control |
| url | https://arxiv.org/abs/2510.15285 |