Plasma Processing of FRIB Low-Beta Cryomodules using Higher-Order-Modes
Fuente:
arXiv
Enregistré dans:
| Auteurs principaux: | , , , , , , |
|---|---|
| Format: | Preprint |
| Publié: |
2025
|
| Sujets: | |
| Accès en ligne: | |
| Tags: |
Ajouter un tag
Pas de tags, Soyez le premier à ajouter un tag!
|
| _version_ | 1866911247997337600 |
|---|---|
| author | Tutt, P. Chang, W. Elliott, K. Hartung, W. Kim, S. Saito, K. Xu, T. |
| author_facet | Tutt, P. Chang, W. Elliott, K. Hartung, W. Kim, S. Saito, K. Xu, T. |
| contents | Improvement in SRF accelerator performance after in-tunnel plasma processing has been seen at SNS and CEBAF. Plasma processing development for FRIB quarter-wave and half-wave resonators (QWRs, HWRs) was initiated in 2020. Plasma processing on individual QWRs (beta = 0.085) and HWRs (beta = 0.53) has been found to significantly reduce field emission. A challenge for the FRIB cavities is the relatively weak fundamental power coupler (FPC) coupling strength (chosen for efficient continuous-wave acceleration), which produces a lot of mismatch during plasma processing at room temperature. For FRIB QWRs, driving the plasma with higher-order modes (HOMs) is beneficial to reduce the FPC mismatch and increase the plasma density. The first plasma processing trial on a spare FRIB QWR cryomodule was done in January 2024, with before-and-after bunker tests and subsequent installation into the linac tunnel. The first in-tunnel plasma processing trial was completed in September 2025. For both cryomodules, before-and-after cold tests showed a significant increase in the average accelerating gradient for field emission onset after plasma processing for some cavities. In parallel with the cryomodule trials, the use of dual-drive plasma is being explored with the goal of improving the effectiveness of plasma processing. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2511_02151 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | Plasma Processing of FRIB Low-Beta Cryomodules using Higher-Order-Modes Tutt, P. Chang, W. Elliott, K. Hartung, W. Kim, S. Saito, K. Xu, T. Accelerator Physics Improvement in SRF accelerator performance after in-tunnel plasma processing has been seen at SNS and CEBAF. Plasma processing development for FRIB quarter-wave and half-wave resonators (QWRs, HWRs) was initiated in 2020. Plasma processing on individual QWRs (beta = 0.085) and HWRs (beta = 0.53) has been found to significantly reduce field emission. A challenge for the FRIB cavities is the relatively weak fundamental power coupler (FPC) coupling strength (chosen for efficient continuous-wave acceleration), which produces a lot of mismatch during plasma processing at room temperature. For FRIB QWRs, driving the plasma with higher-order modes (HOMs) is beneficial to reduce the FPC mismatch and increase the plasma density. The first plasma processing trial on a spare FRIB QWR cryomodule was done in January 2024, with before-and-after bunker tests and subsequent installation into the linac tunnel. The first in-tunnel plasma processing trial was completed in September 2025. For both cryomodules, before-and-after cold tests showed a significant increase in the average accelerating gradient for field emission onset after plasma processing for some cavities. In parallel with the cryomodule trials, the use of dual-drive plasma is being explored with the goal of improving the effectiveness of plasma processing. |
| title | Plasma Processing of FRIB Low-Beta Cryomodules using Higher-Order-Modes |
| topic | Accelerator Physics |
| url | https://arxiv.org/abs/2511.02151 |