Topmetal-L: A Low Noise Charge-Sensitive Pixel Sensor for POLAR2/LPD
Fuente:
arXiv
Guardado en:
| Autores principales: | , , , , , , , , , |
|---|---|
| Formato: | Preprint |
| Publicado: |
2025
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1866909921266630656 |
|---|---|
| author | Xie, Li-rong Zhou, Shi-Qiang Yi, Di-Fan Feng, Huan-Bo Feng, Zhu-Ke Wang, Dong Gao, Chao-song Liang, En-Wei Sun, Xiang-Ming Liu, Hong-Bang |
| author_facet | Xie, Li-rong Zhou, Shi-Qiang Yi, Di-Fan Feng, Huan-Bo Feng, Zhu-Ke Wang, Dong Gao, Chao-song Liang, En-Wei Sun, Xiang-Ming Liu, Hong-Bang |
| contents | POLAR-2 is a next-generation space astronomy platform led by China, with its core scientific objective focused on high-precision polarization measurements of gamma-ray bursts. As one of its key payloads, the Low-energy Polarization Detector (LPD) is designed to perform wide-field surveys to capture X-ray polarization information from gamma-ray bursts in the 2$\sim$10 keV energy range. This paper presents Topmetal-L, a dedicated charge-sensitive pixel sensor developed for the LPD prototype upgrade. Fabricated in a 130 nm CMOS process in 2024, the chip integrates a 356 $\times$ 512 pixel array with a pixel pitch of 45 $μ$m. Each pixel incorporates a 26 $\times$ 26 $μ$m$^2$ charge-collecting window and is capable of simultaneously outputting both energy and position information of deposited charges. Topmetal-L has been systematically optimized for power consumption, noise performance, and readout efficiency. It exhibits an input dynamic range of 0$\sim$4 ke$^{-}$, a typical charge-to-voltage conversion gain of 76.04 $μ$V/e$^{-}$, an average equivalent noise charge of approximately 22.8 e$^{-}$, a sensitive area exceeding 3.69 cm$^2$, and a total power consumption of 720 mW per chip. To meet the requirements of large-area, high-frame-rate readout for gas-based polarization detectors, a sentinel readout scheme is proposed, reducing the full-frame readout time to 730 $μ$s. A prototype Topmetal-L-based gas polarization detection system was evaluated across key energies: it exhibited a residual modulation of 0.26% $\pm$ 0.45% at 5.90 keV, a modulation factor of 66.67% $\pm$ 0.45% for a linearly polarized 8.05 keV source, and a count rate saturated at 15 k counts$\cdot$cm$^{-2}$$\cdot$s$^{-1}$ when tested at 5.40 keV. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2511_09863 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | Topmetal-L: A Low Noise Charge-Sensitive Pixel Sensor for POLAR2/LPD Xie, Li-rong Zhou, Shi-Qiang Yi, Di-Fan Feng, Huan-Bo Feng, Zhu-Ke Wang, Dong Gao, Chao-song Liang, En-Wei Sun, Xiang-Ming Liu, Hong-Bang Instrumentation and Methods for Astrophysics Nuclear Experiment Instrumentation and Detectors POLAR-2 is a next-generation space astronomy platform led by China, with its core scientific objective focused on high-precision polarization measurements of gamma-ray bursts. As one of its key payloads, the Low-energy Polarization Detector (LPD) is designed to perform wide-field surveys to capture X-ray polarization information from gamma-ray bursts in the 2$\sim$10 keV energy range. This paper presents Topmetal-L, a dedicated charge-sensitive pixel sensor developed for the LPD prototype upgrade. Fabricated in a 130 nm CMOS process in 2024, the chip integrates a 356 $\times$ 512 pixel array with a pixel pitch of 45 $μ$m. Each pixel incorporates a 26 $\times$ 26 $μ$m$^2$ charge-collecting window and is capable of simultaneously outputting both energy and position information of deposited charges. Topmetal-L has been systematically optimized for power consumption, noise performance, and readout efficiency. It exhibits an input dynamic range of 0$\sim$4 ke$^{-}$, a typical charge-to-voltage conversion gain of 76.04 $μ$V/e$^{-}$, an average equivalent noise charge of approximately 22.8 e$^{-}$, a sensitive area exceeding 3.69 cm$^2$, and a total power consumption of 720 mW per chip. To meet the requirements of large-area, high-frame-rate readout for gas-based polarization detectors, a sentinel readout scheme is proposed, reducing the full-frame readout time to 730 $μ$s. A prototype Topmetal-L-based gas polarization detection system was evaluated across key energies: it exhibited a residual modulation of 0.26% $\pm$ 0.45% at 5.90 keV, a modulation factor of 66.67% $\pm$ 0.45% for a linearly polarized 8.05 keV source, and a count rate saturated at 15 k counts$\cdot$cm$^{-2}$$\cdot$s$^{-1}$ when tested at 5.40 keV. |
| title | Topmetal-L: A Low Noise Charge-Sensitive Pixel Sensor for POLAR2/LPD |
| topic | Instrumentation and Methods for Astrophysics Nuclear Experiment Instrumentation and Detectors |
| url | https://arxiv.org/abs/2511.09863 |