Ultra-Low Insertion Loss Stepped Impedance Resonator Topology for HTSC RF Front-End

Fuente: arXiv
Guardado en:
Detalles Bibliográficos
Autores principales: Kurtser, Ilan, Koral, Yoav, Holdengreber, Eldad, Schacham, Shmuel E., Farber, Eliyahu
Formato: Preprint
Publicado: 2025
Materias:
Acceso en línea:
Etiquetas: Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
_version_ 1866917093576802304
author Kurtser, Ilan
Koral, Yoav
Holdengreber, Eldad
Schacham, Shmuel E.
Farber, Eliyahu
author_facet Kurtser, Ilan
Koral, Yoav
Holdengreber, Eldad
Schacham, Shmuel E.
Farber, Eliyahu
contents We present the design, fabrication, and measurement of a high-temperature superconductor (HTSC) Stepped Impedance Resonator (SIR) band-pass filter for S-band applications, and its incorporation into a cryogenic receiver cascade. The 11-pole filter, implemented in YBa2Cu3O(7-x) (YBCO) thin films on sapphire, exhibits an ultra-low insertion loss (IL) of -0.1~dB, a sharp roll-off of 100~MHz, and a rejection level exceeding --80~dB. These measured results represent, to the best of our knowledge, the lowest reported IL for an S-band filter with this number of poles. When integrated with a cryogenic low-noise amplifier (LNA), system-level simulations and measurements predict a receiver noise figure (NF) of 0.34~dB at 3.39~GHz, enabling a 20% increase in radar detection range compared with conventional copper-based front ends. This work demonstrates the feasibility of practical HTSC-based RF front-ends for next-generation communication and radar systems.
format Preprint
id arxiv_https___arxiv_org_abs_2511_14447
institution arXiv
publishDate 2025
record_format arxiv
spellingShingle Ultra-Low Insertion Loss Stepped Impedance Resonator Topology for HTSC RF Front-End
Kurtser, Ilan
Koral, Yoav
Holdengreber, Eldad
Schacham, Shmuel E.
Farber, Eliyahu
Systems and Control
We present the design, fabrication, and measurement of a high-temperature superconductor (HTSC) Stepped Impedance Resonator (SIR) band-pass filter for S-band applications, and its incorporation into a cryogenic receiver cascade. The 11-pole filter, implemented in YBa2Cu3O(7-x) (YBCO) thin films on sapphire, exhibits an ultra-low insertion loss (IL) of -0.1~dB, a sharp roll-off of 100~MHz, and a rejection level exceeding --80~dB. These measured results represent, to the best of our knowledge, the lowest reported IL for an S-band filter with this number of poles. When integrated with a cryogenic low-noise amplifier (LNA), system-level simulations and measurements predict a receiver noise figure (NF) of 0.34~dB at 3.39~GHz, enabling a 20% increase in radar detection range compared with conventional copper-based front ends. This work demonstrates the feasibility of practical HTSC-based RF front-ends for next-generation communication and radar systems.
title Ultra-Low Insertion Loss Stepped Impedance Resonator Topology for HTSC RF Front-End
topic Systems and Control
url https://arxiv.org/abs/2511.14447