Cover Image

Mechanical Design of the PIP-II ORBUMP Pulsed Dipole Magnet

Fuente: arXiv

Saved in:

Bibliographic Details
Main Authors:	Karas, D., Badgley, K., Chen, Z., Chernenok, V., Davidson, M., Harding, D., Johnson, D., Kashikhin, V., Robotham, W., Strauss, T., Szabo, B., Meulen, J. Vander
Format:	Preprint
Published:	2025
Subjects:	Accelerator Physics
Online Access:	Acceder al recurso
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Development of Design for the STS Extraction Magnet System
by: Chernenok, V., et al.
Published: (2026)

Oakridge PPU Magnets: Results and Measurements
by: DiMarco, J., et al.
Published: (2025)

Master Oscillator and Phase Reference Line Design for the PIP-II Linac
by: Syed, A., et al.
Published: (2025)

Magnetic and Mechanical Analysis of Bi-2212 Rutherford Cable in a Cos-Theta Sub-Scale Dipole Coil
by: D'Agliano, A., et al.
Published: (2025)

Magnetic measurements of Fermilab rapid-cycling Booster gradient magnets
by: DiMarco, J., et al.
Published: (2025)

Heat load measurements for the PIP-II pHB650 cryomodule
by: Porwisiak, D., et al.
Published: (2026)

Critical transverse compressive stresses of straight and bent CORC$^\circledR$ wires with and without impregnation
by: Xu, X., et al.
Published: (2026)

PIP-II Linac Cryogenic Distribution System Design Challenges
by: Banaszkiewicz, T., et al.
Published: (2024)

Performance of PIP-II High-beta 650 Cryomodule After Transatlantic Shipping
by: Ozelis, J., et al.
Published: (2024)

Cold Test Results of Pre-Production PIP-II SSR2 Cavities with High-Power Couplers in the Fermilab Spoke Test Cryostat
by: Sukhanov, A., et al.
Published: (2024)

Controls at the Fermilab PIP-II Superconducting Linac
by: Nicklaus, Dennis J., et al.
Published: (2024)

Development of BPM electronics for PIP-II at Fermilab
by: Liu, Shengli, et al.
Published: (2025)

Booster Cavity Damper Redesign for PIP-II
by: Pieper, Dustin, et al.
Published: (2025)

Software and Firmware-logic Design for the PIP-II Machine Protection System Mode and Configuration Control at Fermilab
by: Carmichael, L., et al.
Published: (2024)

Fermilab PIP-II CDS and CM Cryogenic Controls System
by: Patel, Pratik, et al.
Published: (2025)

Optimization Studies of Radiation Shielding for the PIP-II Project at Fermilab
by: Makovec, Alajos, et al.
Published: (2025)

LLRF System Analysis for the Fermilab PIP-II Superconducting LINAC
by: Varghese, P., et al.
Published: (2025)

Conceptual Design of A 20 T Dipole Based on Hybrid REBCO/Nb3Sn Cos-theta Coil*
by: Zlobin, A. V.
Published: (2024)

Development and Test of a Large-aperture Nb3Sn Cos-theta Dipole Coil with Stress Management
by: Novitski, I., et al.
Published: (2024)

The 2025 Roadmaps for the US Magnet Development Program
by: Cooley, Lance, et al.
Published: (2025)

Testing the DAE LLRF system with a PIP-II SSR2 Cavity
by: Nasery, R., et al.
Published: (2025)

Accelerator Upgrades Required for Beam Operation at Fermilab in the PIP-II/DUNE Era
by: Krishnagopal, S., et al.
Published: (2026)

Field Emission Analysis in SRF Cavities for PIP-II Using GEANT4
by: Wijethunga, S. A. K., et al.
Published: (2025)

Application of Flex-QA Arrays in HTS Magnet Testing
by: Stoynev, Stoyan, et al.
Published: (2025)

Fermilab PIP II machine protection system digitized data noise elimination scheme and its FPGA implementation
by: Wu, J., et al.
Published: (2026)

Re-assembly and test of a COMB dipole magnet with STAR wires
by: Kashikhin, V. V., et al.
Published: (2024)

Observation of Electromagnetic Transients in a Nb3Sn 4-layer Dipole Mirror Magnet
by: Krave, Steven, et al.
Published: (2025)

What is Needed for BiSCO to Work in a Dipole Insert for 20 Tesla Hybrid Accelerator Magnets
by: Barzi, E.
Published: (2024)

Pressure Spike in The LBNF Absorber Core s Gun Drilled Cooling Channel from an Accident Beam Pulse
by: Deshpande, A., et al.
Published: (2024)

Deuterium-Tritium Levitated Dipole Fusion Power Plants
by: Simpson, T., et al.
Published: (2026)

Impact of Solenoid Induced Residual Magnetic Fields on The Prototype SSR1 CM Performance
by: Passarelli, D., et al.
Published: (2024)

Quench Performance of the First Pre-series AUP Cryo-assembly
by: Baldini, M., et al.
Published: (2024)

CBETA Design Report, Cornell-BNL ERL Test Accelerator
by: Hoffstaetter, G. H., et al.
Published: (2017)

Increasing the opening speed of the plasma opening switch on an direct action accelerator with an inductive energy storage device
by: Vinnikov, D. V., et al.
Published: (2026)

Focusing of Relativistic Electron Beams With Permanent Magnetic Solenoid
by: Xu, T., et al.
Published: (2025)

Introduction to the Mechanical Design of Accelerators
by: Timmins, Marc
Published: (2026)

Initial PIP-II Beam Current Monitor Fault Case Analyses & Beam Position Monitor Linearity Studies in CST Studio Suite
by: Rouzky, A., et al.
Published: (2024)

Exploring the Focusing Mechanism of the NuMI Horn Magnets
by: Yonehara, Katsuya, et al.
Published: (2023)

Efficient Dynamic and Momentum Aperture Optimization for Lattice Design Using Multipoint Bayesian Algorithm Execution
by: Zhang, Z., et al.
Published: (2025)

Beam Operation for Particle Physics and Photon Science with Pulse-to-Pulse Modulation at KEK injector LINAC
by: Furukawa, Kazuro, et al.
Published: (2023)