An Analytical and Empirical Investigation of Tag Partitioning for Energy-Efficient Reliable Cache
Fuente:
arXiv
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Preprint |
| Published: |
2025
|
| Subjects: | |
| Online Access: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866908680849457152 |
|---|---|
| author | Cheshmikhani, Elham Farbeh, Hamed |
| author_facet | Cheshmikhani, Elham Farbeh, Hamed |
| contents | Associative cache memory significantly influences processor performance and energy consumption. Because it occupies over half of the chip area, cache memory is highly susceptible to transient and permanent faults, posing reliability challenges. As the only hardware-managed memory module, the cache tag array is the most active and critical component, dominating both energy usage and error rate. Tag partitioning is a widely used technique to reduce tag-access energy and enhance reliability. It divides tag comparison into two phases: first comparing the k lower bits, and then activating only the matching tag entries to compare the remaining higher bits. The key design parameter is the selection of the tag-splitting point k, which determines how many reads are eliminated. However, prior studies have chosen k intuitively, randomly, or empirically, without justification. Even experimentally determined values are ad-hoc and do not generalize across cache configurations due to high sensitivity to architectural parameters.
In this paper, we analytically show that choosing k too large or too small substantially reduces the effectiveness of tag partitioning. We then derive a formulation that determines the optimal splitting point based on cache configuration parameters. The formulation is convex, differentiable, and capable of precisely quantifying tag-partitioning efficiency for any k and configuration. To validate our model, we experimentally evaluate tag-partitioning efficiency and optimal k across a broad set of cache designs and demonstrate close agreement between analytical and experimental results. The proposed formulation enables designers and researchers to instantly compute the optimal tag-splitting point and accurately estimate tag-read reduction. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2512_00112 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | An Analytical and Empirical Investigation of Tag Partitioning for Energy-Efficient Reliable Cache Cheshmikhani, Elham Farbeh, Hamed Hardware Architecture Associative cache memory significantly influences processor performance and energy consumption. Because it occupies over half of the chip area, cache memory is highly susceptible to transient and permanent faults, posing reliability challenges. As the only hardware-managed memory module, the cache tag array is the most active and critical component, dominating both energy usage and error rate. Tag partitioning is a widely used technique to reduce tag-access energy and enhance reliability. It divides tag comparison into two phases: first comparing the k lower bits, and then activating only the matching tag entries to compare the remaining higher bits. The key design parameter is the selection of the tag-splitting point k, which determines how many reads are eliminated. However, prior studies have chosen k intuitively, randomly, or empirically, without justification. Even experimentally determined values are ad-hoc and do not generalize across cache configurations due to high sensitivity to architectural parameters. In this paper, we analytically show that choosing k too large or too small substantially reduces the effectiveness of tag partitioning. We then derive a formulation that determines the optimal splitting point based on cache configuration parameters. The formulation is convex, differentiable, and capable of precisely quantifying tag-partitioning efficiency for any k and configuration. To validate our model, we experimentally evaluate tag-partitioning efficiency and optimal k across a broad set of cache designs and demonstrate close agreement between analytical and experimental results. The proposed formulation enables designers and researchers to instantly compute the optimal tag-splitting point and accurately estimate tag-read reduction. |
| title | An Analytical and Empirical Investigation of Tag Partitioning for Energy-Efficient Reliable Cache |
| topic | Hardware Architecture |
| url | https://arxiv.org/abs/2512.00112 |