Single Flux Quantum Circuit Operation at Millikelvin Temperatures
Fuente:
arXiv
Guardado en:
| Autores principales: | , , , , , , , , |
|---|---|
| Formato: | Preprint |
| Publicado: |
2025
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1866917153060421632 |
|---|---|
| author | Walter, Jason Weis, Adam C. Tsai, Kan-Ting Yu, Meng-Ju Katam, Naveen Kirichenko, Alex F. Mukhanov, Oleg A. Han, Shu-Jen Vernik, Igor V. |
| author_facet | Walter, Jason Weis, Adam C. Tsai, Kan-Ting Yu, Meng-Ju Katam, Naveen Kirichenko, Alex F. Mukhanov, Oleg A. Han, Shu-Jen Vernik, Igor V. |
| contents | As quantum computing processors increase in size, there is growing interest in developing cryogenic electronics to overcome significant challenges to system scaling. Single flux-quantum (SFQ) circuits offer a promising alternative to remote, bulky, and power-hungry room temperature electronics. To meet the need for digital qubit control, readout, and co-processing, SFQ circuits must be adapted to operate at millikelvin temperatures near quantum processors. SEEQC's SFQuClass digital quantum management approach proximally places energy-efficient SFQ (ERSFQ) circuits and qubits in a multi-chip module. This enables extremely low power dissipation, compatible with a typical dilution cryostat's limited cooling power, while maintaining high processing speed and low error rates. We report on systematic testing from 4 K to 10 mK of a comprehensive set of ERSFQ cells, as well as more complex circuits such as programmable counters and demultiplexers used in digital qubit control. We compare the operating margins and error rates of these circuits and find that, at millikelvin, bias margins decrease and the center of the margins (i.e., the optimal bias current value) increases by ~15%, compared to 4.2 K. The margins can be restored by thermal annealing by reducing Josephson junction (JJ) critical current Ic. To provide guidance for how circuit parameters vary from 4.2 K to millikelvin, relevant analog process control monitors (PCMs) were tested in the temperature range of interest. The measured JJ critical current (of the PCM JJ arrays) increases by ~15% when decreasing temperature from 4.2 K to millikelvin, in good agreement with both theory and the empirically measured change in the center of bias margins for the tested digital circuits. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2512_06895 |
| institution | arXiv |
| publishDate | 2025 |
| record_format | arxiv |
| spellingShingle | Single Flux Quantum Circuit Operation at Millikelvin Temperatures Walter, Jason Weis, Adam C. Tsai, Kan-Ting Yu, Meng-Ju Katam, Naveen Kirichenko, Alex F. Mukhanov, Oleg A. Han, Shu-Jen Vernik, Igor V. Quantum Physics Superconductivity Applied Physics As quantum computing processors increase in size, there is growing interest in developing cryogenic electronics to overcome significant challenges to system scaling. Single flux-quantum (SFQ) circuits offer a promising alternative to remote, bulky, and power-hungry room temperature electronics. To meet the need for digital qubit control, readout, and co-processing, SFQ circuits must be adapted to operate at millikelvin temperatures near quantum processors. SEEQC's SFQuClass digital quantum management approach proximally places energy-efficient SFQ (ERSFQ) circuits and qubits in a multi-chip module. This enables extremely low power dissipation, compatible with a typical dilution cryostat's limited cooling power, while maintaining high processing speed and low error rates. We report on systematic testing from 4 K to 10 mK of a comprehensive set of ERSFQ cells, as well as more complex circuits such as programmable counters and demultiplexers used in digital qubit control. We compare the operating margins and error rates of these circuits and find that, at millikelvin, bias margins decrease and the center of the margins (i.e., the optimal bias current value) increases by ~15%, compared to 4.2 K. The margins can be restored by thermal annealing by reducing Josephson junction (JJ) critical current Ic. To provide guidance for how circuit parameters vary from 4.2 K to millikelvin, relevant analog process control monitors (PCMs) were tested in the temperature range of interest. The measured JJ critical current (of the PCM JJ arrays) increases by ~15% when decreasing temperature from 4.2 K to millikelvin, in good agreement with both theory and the empirically measured change in the center of bias margins for the tested digital circuits. |
| title | Single Flux Quantum Circuit Operation at Millikelvin Temperatures |
| topic | Quantum Physics Superconductivity Applied Physics |
| url | https://arxiv.org/abs/2512.06895 |