Saved in:
Bibliographic Details
Main Authors: Merza, Victor, Bancer, Aleksandr, Bashkirov, Vladimir, Belchior, Ana, Brzozowska, Beata, Canhoto, João F., Gasik, Piotr, Grzyb, Jaroslaw, Katmeh, Khaled, Pietrzak, Marcin, Ruciński, Antoni, Schulte, Reinhard
Format: Preprint
Published: 2025
Subjects:
Online Access:https://arxiv.org/abs/2512.11126
Tags: Add Tag
No Tags, Be the first to tag this record!
_version_ 1866915990256746496
author Merza, Victor
Bancer, Aleksandr
Bashkirov, Vladimir
Belchior, Ana
Brzozowska, Beata
Canhoto, João F.
Gasik, Piotr
Grzyb, Jaroslaw
Katmeh, Khaled
Pietrzak, Marcin
Ruciński, Antoni
Schulte, Reinhard
author_facet Merza, Victor
Bancer, Aleksandr
Bashkirov, Vladimir
Belchior, Ana
Brzozowska, Beata
Canhoto, João F.
Gasik, Piotr
Grzyb, Jaroslaw
Katmeh, Khaled
Pietrzak, Marcin
Ruciński, Antoni
Schulte, Reinhard
contents In recent years, compact nanodosimetric detectors based on ion multiplication in low-pressure gas have been developed and gained attention in the scientific community. These detectors use strong electric fields to collect and multiply positive ions produced by the incident radiation in mm-sized cell holes in dielectric materials, achieving a nm-equivalent spatial resolution of the localization of ionization events, when scaled to liquid water at unit density. Their design assumes that ion-impact ionizations of gas molecules within the cell holes dominate signal formation, yet this assumption has lacked direct physical verification. Electron emission from the cell hole walls or the cathode due to ion-impact could also contribute, requiring alternative designs to optimize efficiency. To investigate the relative importance of the possible mechanisms, a nanodosimetric detector featuring a single cell hole with a diameter of 1.5 mm in a dielectric plate was developed. Ion collection and multiplication were achieved by applying a negative high voltage to the glass cathode 0.5 mm below the cell hole, assisted by a low drift field above the plate. A grounded readout electrode with a 0.8 mm hole covers the cell hole to prevent interactions of collected ions with the hole walls. High signal yields in 1 mbar and 2 mbar propane gas were observed and indicated that ion-impact ionizations of the gas molecules could indeed be the primary mechanism for signal induction. Ion-induced secondary electron emission from the cathode was identified as another potential contribution. The compact nanodosimeter setup was further modeled with Geant4-DNA and Garfield++ for deeper insight. The results of these studies are important for understanding and developing a new class of nanodosimeters with potential applications in particle therapy, radiation protection, space dosimetry, and particle physics.
format Preprint
id arxiv_https___arxiv_org_abs_2512_11126
institution arXiv
publishDate 2025
record_format arxiv
spellingShingle Experimental and Monte Carlo Simulation Studies to Investigate the Working Principle of Compact Nanodosimeters
Merza, Victor
Bancer, Aleksandr
Bashkirov, Vladimir
Belchior, Ana
Brzozowska, Beata
Canhoto, João F.
Gasik, Piotr
Grzyb, Jaroslaw
Katmeh, Khaled
Pietrzak, Marcin
Ruciński, Antoni
Schulte, Reinhard
Instrumentation and Detectors
In recent years, compact nanodosimetric detectors based on ion multiplication in low-pressure gas have been developed and gained attention in the scientific community. These detectors use strong electric fields to collect and multiply positive ions produced by the incident radiation in mm-sized cell holes in dielectric materials, achieving a nm-equivalent spatial resolution of the localization of ionization events, when scaled to liquid water at unit density. Their design assumes that ion-impact ionizations of gas molecules within the cell holes dominate signal formation, yet this assumption has lacked direct physical verification. Electron emission from the cell hole walls or the cathode due to ion-impact could also contribute, requiring alternative designs to optimize efficiency. To investigate the relative importance of the possible mechanisms, a nanodosimetric detector featuring a single cell hole with a diameter of 1.5 mm in a dielectric plate was developed. Ion collection and multiplication were achieved by applying a negative high voltage to the glass cathode 0.5 mm below the cell hole, assisted by a low drift field above the plate. A grounded readout electrode with a 0.8 mm hole covers the cell hole to prevent interactions of collected ions with the hole walls. High signal yields in 1 mbar and 2 mbar propane gas were observed and indicated that ion-impact ionizations of the gas molecules could indeed be the primary mechanism for signal induction. Ion-induced secondary electron emission from the cathode was identified as another potential contribution. The compact nanodosimeter setup was further modeled with Geant4-DNA and Garfield++ for deeper insight. The results of these studies are important for understanding and developing a new class of nanodosimeters with potential applications in particle therapy, radiation protection, space dosimetry, and particle physics.
title Experimental and Monte Carlo Simulation Studies to Investigate the Working Principle of Compact Nanodosimeters
topic Instrumentation and Detectors
url https://arxiv.org/abs/2512.11126