Image de couverture de livre

Design, construction, and testing of the PandaX-xT cryogenics system

Fuente: arXiv

Enregistré dans:

Détails bibliographiques
Auteurs principaux:	Wang, Xu, Zhao, Li, Xiao, Xiang, Cui, Xiangyi, Li, Shuaijie, Liu, Jianglai
Format:	Preprint
Publié:	2025
Sujets:	Instrumentation and Detectors
Accès en ligne:	Acceder al recurso
Tags:	Ajouter un tag Pas de tags, Soyez le premier à ajouter un tag!

Documents similaires

The throttling refrigeration system for the large cooling power recovery of the PandaX-xT cryogenic distillation system for radon removal
par: Yao, Shunyu, et autres
Publié: (2025)

Tritiated methane reduction in the PandaX-4T experiment via purge and cryogenic distillation processes
par: Li, Shuaijie, et autres
Publié: (2025)

Radon Removal Commissioning of the PandaX-4T Cryogenic Distillation System
par: Cui, Xiangyi, et autres
Publié: (2024)

Thermal Management Design and Key Technology Validation for PandaX Underground Experiment
par: Zhan, Tao, et autres
Publié: (2024)

Waveform Simulation in PandaX-4T
par: Li, Jiafu, et autres
Publié: (2023)

Signal Response Model in PandaX-4T
par: Luo, Yunyang, et autres
Publié: (2024)

Detecting Neutrinos from Supernova Bursts in PandaX-4T
par: Pang, Binyu, et autres
Publié: (2024)

Optimization of gain uniformity in thermal bonding Micromegas for the PandaX-III experiment
par: Peng, Yunzhi, et autres
Publié: (2025)

Position reconstruction and surface background model for the PandaX-4T detector
par: Qian, Zhicheng, et autres
Publié: (2025)

Upgrade of the PandaX-4T online data quality monitoring system and perspectives for future multi-tons PandaX upgrades
par: Zhou, Yubo, et autres
Publié: (2024)

An Improved Evaluation of the Neutron Background in the PandaX-II Experiment
par: Wang, Qiuhong, et autres
Publié: (2019)

Improvement on the Linearity Response of PandaX-4T with new Photomultiplier Tubes Bases
par: Luo, Lingyin, et autres
Publié: (2023)

Design and construction of a cryogenic subcooler-box for supplying single phase supercritical helium to dark matter and gravitational wave experiments
par: Singh, Udai Raj, et autres
Publié: (2026)

Mixing plant for JUNO liquid scintillator: Design, construction, installation and commissioning
par: Shao, Junyu, et autres
Publié: (2026)

Low-vibration cryogenic test facility for next generation of ground-based gravitational-wave observatories
par: Kapasi, D. P., et autres
Publié: (2024)

High-resolution calorimetric sample platforms for cryogenic thermodynamic studies with multimodal synchrotron x-ray compatibility
par: Patel, U., et autres
Publié: (2026)

Boltzman optical thermometry for cryogenics
par: Zeman, Marek, et autres
Publié: (2024)

PANCAKE: a large-diameter cryogenic test platform with a flat floor for next generation multi-tonne liquid xenon detectors
par: Brown, Adam, et autres
Publié: (2023)

Dynamic thermal sensitivity of microwave cryogenic sapphire resonator
par: Hachani, Mohamed-Yacine, et autres
Publié: (2026)

LANTERN: Characterization technology for low threshold cryogenic detectors
par: Del Castello, Giorgio
Publié: (2026)

Optimal operation of cryogenic calorimeters through deep reinforcement learning
par: Angloher, G., et autres
Publié: (2023)

A novel cryogenic VUV spectrofluorometer for the characterization of wavelength shifters
par: Leonhardt, A., et autres
Publié: (2023)

Continuous-wave cryogenic optical absorption spectrometer for sub-THz frequencies
par: Rogić, L., et autres
Publié: (2024)

Design, Fabrication and Characterization of Microwave Multiplexing SQUID Prototype
par: Song, Mengjie, et autres
Publié: (2026)

Correcting impedance measurements for background parasitics to characterize circuit components in cryogenic environments
par: Carpenter, Riley J., et autres
Publié: (2025)

Production of GEM-like structures for cryogenic applications, using laser-cutting techniques
par: Rodas-Rodríguez, D., et autres
Publié: (2026)

Study of cosmic ray impacts on cryogenic high sensitivity detectors
par: Besnard, Anaïs, et autres
Publié: (2026)

A nonlinear multiphysics model for the design validation of the ASTAROTH copper-steel cryogenic chamber
par: Alessandria, F., et autres
Publié: (2025)

Lessons from commissioning of the cryogenic system for the Short-Baseline Neutrino Detector at Fermilab
par: Schwartz, Frederick, et autres
Publié: (2025)

Controlling the recovery time of the superconducting nanowire single-photon detector with a voltage-controlled cryogenic tunable resistor
par: Wang, Hui, et autres
Publié: (2025)

Design and implementation of a high-density sub-nanosecond timing system for a C-band photocathode electron gun test platform
par: Zhu, Peng, et autres
Publié: (2026)

SiPM non-linearity studies in beam tests with scintillating crystals
par: Zhao, Zhiyu, et autres
Publié: (2026)

Design and test for the CEPC muon subdetector based on extruded scintillator and SiPM
par: Zhang, Hongyu, et autres
Publié: (2023)

Proof-of-concept of a xenon-based cryogenic heat pump demonstrator for future liquid xenon observatories
par: Schulte, P., et autres
Publié: (2025)

A Design of Hadronic Calorimeter for DarkSHINE Experiment
par: Wang, Zhen, et autres
Publié: (2023)

Design of the offline test electronics for the nozzle system of proton therapy
par: Huang, Peng, et autres
Publié: (2023)

High voltage and electrode system for a cryogenic experiment to search for the neutron electric dipole moment
par: Blatnik, M. A., et autres
Publié: (2025)

Design and Initial Test of the Weighing Unit for Tsinghua Tabletop Kibble Balance
par: Liu, Weibo, et autres
Publié: (2026)

Thermal architecture for a cryogenic super-pressure balloon payload: design and development of the Taurus flight cryostat
par: Tartakovsky, Simon, et autres
Publié: (2024)

Design of a Miniature Kibble Balance for Kilogram-Scale Mass Calibration -- KBmini
par: Li, Shisong, et autres
Publié: (2026)