Geometry-Aware LoRaWAN Gateway Placement in Dense Urban Cities Using Digital Twins
Fuente:
arXiv
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Preprint |
| Published: |
2026
|
| Subjects: | |
| Online Access: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866908759194861568 |
|---|---|
| author | Ibrahim, Abdikarim Mohamed Nordin, Rosdiadee |
| author_facet | Ibrahim, Abdikarim Mohamed Nordin, Rosdiadee |
| contents | LoRaWAN deployments rely on rough range estimates or simplified propagation models to decide where to place/mount gateways. As a result, operators have limited visibility into how rooftop choice, streets, and building shadowing jointly affect coverage and reliability. This paper addresses the problem of gateway placement in dense urban environments by combining a geometry accurate Digital Twin (DT) with a GPU accelerated ray tracing engine. Existing studies optimize placement on abstract grids or tune models with sparse measurements; few works evaluate LoRaWAN gateways on a full 3D city model using a realistic link budget. In this paper, we develop a DT with ITU radio materials and evaluate eight candidate rooftops for RAK7289 WisGate Edge Pro gateways under a sub-GHz link budget derived from the data sheet. For each rooftop, we obtain Signal-to-Noise Ratios (SNR) on a 5 meter grid, derive robust and edge coverage indicators, and apply a greedy maximum coverage algorithm to rank sites and quantify the benefit of incremental densification. Results show that a single rooftop gateway covers one fifth of the full Sunway twin (i.e., the DT) at a robust SNR threshold, and that six sites still leave large areas of single gateway or out of coverage cells in surrounding residential streets. The findings from this paper shows that DT and ray tracing tools enable network operators to bridge the gap of expensive real-world trials and planning to identify if the planned LoRaWAN gateway is sufficient or additional sites are required. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2601_07133 |
| institution | arXiv |
| publishDate | 2026 |
| record_format | arxiv |
| spellingShingle | Geometry-Aware LoRaWAN Gateway Placement in Dense Urban Cities Using Digital Twins Ibrahim, Abdikarim Mohamed Nordin, Rosdiadee Systems and Control Emerging Technologies LoRaWAN deployments rely on rough range estimates or simplified propagation models to decide where to place/mount gateways. As a result, operators have limited visibility into how rooftop choice, streets, and building shadowing jointly affect coverage and reliability. This paper addresses the problem of gateway placement in dense urban environments by combining a geometry accurate Digital Twin (DT) with a GPU accelerated ray tracing engine. Existing studies optimize placement on abstract grids or tune models with sparse measurements; few works evaluate LoRaWAN gateways on a full 3D city model using a realistic link budget. In this paper, we develop a DT with ITU radio materials and evaluate eight candidate rooftops for RAK7289 WisGate Edge Pro gateways under a sub-GHz link budget derived from the data sheet. For each rooftop, we obtain Signal-to-Noise Ratios (SNR) on a 5 meter grid, derive robust and edge coverage indicators, and apply a greedy maximum coverage algorithm to rank sites and quantify the benefit of incremental densification. Results show that a single rooftop gateway covers one fifth of the full Sunway twin (i.e., the DT) at a robust SNR threshold, and that six sites still leave large areas of single gateway or out of coverage cells in surrounding residential streets. The findings from this paper shows that DT and ray tracing tools enable network operators to bridge the gap of expensive real-world trials and planning to identify if the planned LoRaWAN gateway is sufficient or additional sites are required. |
| title | Geometry-Aware LoRaWAN Gateway Placement in Dense Urban Cities Using Digital Twins |
| topic | Systems and Control Emerging Technologies |
| url | https://arxiv.org/abs/2601.07133 |