Rapid Primary Radiation Damage Resistance Assessment of Precipitation-Hardened Cu Alloys
Fuente:
arXiv
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Preprint |
| Published: |
2026
|
| Subjects: | |
| Online Access: | |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| _version_ | 1866912923414167552 |
|---|---|
| author | Botica-Artalejo, Elena Wallace, Gregory Short, Michael P. |
| author_facet | Botica-Artalejo, Elena Wallace, Gregory Short, Michael P. |
| contents | This study establishes a direct correlation between in situ irradiation-induced property changes measured by transient grating spectroscopy (TGS) and the resulting microstructural damage in Cu-Cr-Ta alloys. Thin films fabricated by physical vapor deposition were irradiated with 6.6 MeV Cu +3 ions up to 25 DPA, while TGS continuously monitored the evolution of surface acoustic wave (SAW) frequency and thermal diffusivity. Post-irradiation transmission electron microscopy (TEM) was used to quantify void formation as a metric of accumulated radiation damage. A pronounced decrease in SAW frequency was observed some seconds after the onset of irradiation, and it was found to correlate strongly with the final void density. Vacancy MEB calculations propose that the small decrease in SAW frequency is associated with the low population of mobile vacancies, promoting defect recombination and decreasing void formation. This relationship enables early prediction of relative radiation damage resistance within minutes of irradiation, substantially reducing the time required compared to conventional irradiation and postcharacterization routes, allowing rapid screening of multiple compositions. We were able to test this method with 3 compositions of the Cu-Cr-Ta system. More generally, this in situ approach provides an efficient pathway for accelerating the development of materials for radiation environments. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2602_21093 |
| institution | arXiv |
| publishDate | 2026 |
| record_format | arxiv |
| spellingShingle | Rapid Primary Radiation Damage Resistance Assessment of Precipitation-Hardened Cu Alloys Botica-Artalejo, Elena Wallace, Gregory Short, Michael P. Materials Science This study establishes a direct correlation between in situ irradiation-induced property changes measured by transient grating spectroscopy (TGS) and the resulting microstructural damage in Cu-Cr-Ta alloys. Thin films fabricated by physical vapor deposition were irradiated with 6.6 MeV Cu +3 ions up to 25 DPA, while TGS continuously monitored the evolution of surface acoustic wave (SAW) frequency and thermal diffusivity. Post-irradiation transmission electron microscopy (TEM) was used to quantify void formation as a metric of accumulated radiation damage. A pronounced decrease in SAW frequency was observed some seconds after the onset of irradiation, and it was found to correlate strongly with the final void density. Vacancy MEB calculations propose that the small decrease in SAW frequency is associated with the low population of mobile vacancies, promoting defect recombination and decreasing void formation. This relationship enables early prediction of relative radiation damage resistance within minutes of irradiation, substantially reducing the time required compared to conventional irradiation and postcharacterization routes, allowing rapid screening of multiple compositions. We were able to test this method with 3 compositions of the Cu-Cr-Ta system. More generally, this in situ approach provides an efficient pathway for accelerating the development of materials for radiation environments. |
| title | Rapid Primary Radiation Damage Resistance Assessment of Precipitation-Hardened Cu Alloys |
| topic | Materials Science |
| url | https://arxiv.org/abs/2602.21093 |