Experimental and Computational Analysis of the Hydrodynamics of Droplet Generation in a Cylindrical Microfluidic Device
Fuente:
arXiv
Guardado en:
| Autores principales: | , , |
|---|---|
| Formato: | Preprint |
| Publicado: |
2026
|
| Materias: | |
| Acceso en línea: | |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| _version_ | 1866915830880534528 |
|---|---|
| author | Dogra, Pratibha Bharti, Ram Prakash Sharma, Gaurav |
| author_facet | Dogra, Pratibha Bharti, Ram Prakash Sharma, Gaurav |
| contents | This study investigates the hydrodynamics of droplet formation in a T-shaped cylindrical microfluidic device using micro-PIV experiments and CFD simulations. Devices of 150 micro-m internal diameter were fabricated from PDMS via a cost-effective embedded templating method. Flow visualization was conducted using immiscible silicone oil and deionized water, forming water-in-oil droplets. A mathematical model coupling the Navier-Stokes and conservative level-set equations was solved using the finite element method. Detailed flow fields (velocity, pressure, and phase distribution) were obtained over a wide range of flow-rate ratios (0.1-10) and capillary numbers (0.001-0.1) to characterize droplet formation mechanisms. Phase evolution revealed distinct breakup stages (lag, filling, necking, and pinch-off) and multiple regimes (squeezing, dripping, sausage flow, and parallel flow with tip streaming). A regime map delineating droplet and non-droplet regions was developed. Droplet size, curvature, and internal flow profiles exhibited strong dependence on Ca and Qr. Scaling analysis showed linear dependence of droplet size on Qr in the squeezing regime, with curvature nearly independent of Qr. In contrast, both size and curvature followed power-law dependence on Ca and Qr in the dripping regime. Velocity fields inside droplets were laminar and parabolic in the core. Fully developed plug-like profiles appeared in squeezing, whereas front and rear regions remained developing in dripping. Correlations for droplet length, curvature, and film thickness, including a novel thin-film model incorporating visco-inertial and capillary effects, enable predictive design within the studied range. These findings advance fundamental understanding of confined droplet dynamics and provide quantitative guidelines for optimizing droplet-based microfluidic systems. |
| format | Preprint |
| id |
arxiv_https___arxiv_org_abs_2603_02666 |
| institution | arXiv |
| publishDate | 2026 |
| record_format | arxiv |
| spellingShingle | Experimental and Computational Analysis of the Hydrodynamics of Droplet Generation in a Cylindrical Microfluidic Device Dogra, Pratibha Bharti, Ram Prakash Sharma, Gaurav Fluid Dynamics This study investigates the hydrodynamics of droplet formation in a T-shaped cylindrical microfluidic device using micro-PIV experiments and CFD simulations. Devices of 150 micro-m internal diameter were fabricated from PDMS via a cost-effective embedded templating method. Flow visualization was conducted using immiscible silicone oil and deionized water, forming water-in-oil droplets. A mathematical model coupling the Navier-Stokes and conservative level-set equations was solved using the finite element method. Detailed flow fields (velocity, pressure, and phase distribution) were obtained over a wide range of flow-rate ratios (0.1-10) and capillary numbers (0.001-0.1) to characterize droplet formation mechanisms. Phase evolution revealed distinct breakup stages (lag, filling, necking, and pinch-off) and multiple regimes (squeezing, dripping, sausage flow, and parallel flow with tip streaming). A regime map delineating droplet and non-droplet regions was developed. Droplet size, curvature, and internal flow profiles exhibited strong dependence on Ca and Qr. Scaling analysis showed linear dependence of droplet size on Qr in the squeezing regime, with curvature nearly independent of Qr. In contrast, both size and curvature followed power-law dependence on Ca and Qr in the dripping regime. Velocity fields inside droplets were laminar and parabolic in the core. Fully developed plug-like profiles appeared in squeezing, whereas front and rear regions remained developing in dripping. Correlations for droplet length, curvature, and film thickness, including a novel thin-film model incorporating visco-inertial and capillary effects, enable predictive design within the studied range. These findings advance fundamental understanding of confined droplet dynamics and provide quantitative guidelines for optimizing droplet-based microfluidic systems. |
| title | Experimental and Computational Analysis of the Hydrodynamics of Droplet Generation in a Cylindrical Microfluidic Device |
| topic | Fluid Dynamics |
| url | https://arxiv.org/abs/2603.02666 |